FS: AEBS Sleeved H22A1- Brand New! 600+ HP!!
Thread Starter
Honda-Tech Member
Joined: Jul 2002
Posts: 824
Likes: 0
From: Los Angeles, CA, USA
FS: AEBS Sleeved H22A1- Brand New! 600+ HP!!
H22A1 (OEM closed deck) short block sleeved by AEBS. Bored and honed for 87mm CP Pistons. Copper o-ring. Crank was race-prepped by R&D Dyno (all oil passages opened, cleaned, and re-plugged, micropolished, balanced). Includes brand new main, rod, thrust bearings (ACL). I can include used (low mileage) oil pump, water pump, oli pan, etc. if requested. Also includes H23 manual timing belt tensioner conversion. I have pretty much everything else you need to complete a short block, let me know what else you need.
This block was assembled, but NEVER turned over. The head wasn't even mounted, o-rings have not been crushed. An identical setup made 600+ hp and went 10.211 @ 143 in a street car. Perfect for any street or race car!
Retail value:
AEBS Sleeves $1075
AEBS Bore/Hone $200
AEBS Copper O-Ring $200
Race Prep Crank $175
ACL Bearings $100
H22A1 Short Block $600
Manual Tensioner $90
Total $2440
http://www.aebsracing.com/prod...eeves
Asking $1900, for everything listed above.
Pics added 1/12/05:
Pistons & rods are <U>NOT</U> included for the above price.
However, I do also have for sale:
4 Saenz H22A rods. Rated to 600 HP. Same specs as AEM Hyper Rods, manufactured by Saenz. Slightly used, but again, in excellent condition. Complete set of four rods. Including ARP Custom Age 625+ rod bolts. (Expensive-*** bolts) $550 OBO (Cost $660+ brand new) Pics to follow.
4 CP H22A 87mm, 9.0:1 pistons. Part number SC7030. Three slightly used, but perfectly reusable. One brand new. These are the pistons that the above block was bored/honed for. Including pins, no rings. $350 OBO Pics to follow.
Tyler
Modified by Tyler H at 9:57 PM 1/12/2005
Modified by Tyler H at 10:26 PM 8/8/2005
This block was assembled, but NEVER turned over. The head wasn't even mounted, o-rings have not been crushed. An identical setup made 600+ hp and went 10.211 @ 143 in a street car. Perfect for any street or race car!
Retail value:
AEBS Sleeves $1075
AEBS Bore/Hone $200
AEBS Copper O-Ring $200
Race Prep Crank $175
ACL Bearings $100
H22A1 Short Block $600
Manual Tensioner $90
Total $2440
http://www.aebsracing.com/prod...eeves
Asking $1900, for everything listed above.
Pics added 1/12/05:
Pistons & rods are <U>NOT</U> included for the above price.
However, I do also have for sale:
4 Saenz H22A rods. Rated to 600 HP. Same specs as AEM Hyper Rods, manufactured by Saenz. Slightly used, but again, in excellent condition. Complete set of four rods. Including ARP Custom Age 625+ rod bolts. (Expensive-*** bolts) $550 OBO (Cost $660+ brand new) Pics to follow.
4 CP H22A 87mm, 9.0:1 pistons. Part number SC7030. Three slightly used, but perfectly reusable. One brand new. These are the pistons that the above block was bored/honed for. Including pins, no rings. $350 OBO Pics to follow.
Tyler
Modified by Tyler H at 9:57 PM 1/12/2005
Modified by Tyler H at 10:26 PM 8/8/2005
OG triple OG
Joined: Mar 2002
Posts: 27,633
Likes: 2
From: Norcal
Re: FS: AEBS Sleeved H22A1- Brand New! 600+ HP!! (Sp00n'd Supra)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sp00n’d Supra »</TD></TR><TR><TD CLASS="quote">i hope this isnt the same block that was intended to go into ur car after u threw that rod..... 
</TD></TR></TABLE>
i think it was
</TD></TR></TABLE>i think it was
Trending Topics
Re: FS: AEBS Sleeved H22A1- Brand New! 600+ HP!! (Tyler H)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tyler H »</TD></TR><TR><TD CLASS="quote">Thanks for all the bumps guys.....
Tyler</TD></TR></TABLE>
Tyler</TD></TR></TABLE>
Honda-Tech Member
Joined: Aug 2002
Posts: 2,901
Likes: 0
From: JDM ricer land, CA
Re: FS: AEBS Sleeved H22A1- Brand New! 600+ HP!! (Tyler H)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tyler H »</TD></TR><TR><TD CLASS="quote">Thanks for all the bumps guys.....
Tyler</TD></TR></TABLE>
answer the question damit!
Tyler</TD></TR></TABLE>
answer the question damit!
Honda-Tech Member
Joined: May 2001
Posts: 1,595
Likes: 0
From: MD
Re: FS: AEBS Sleeved H22A1- Brand New! 600+ HP!! (Tyler H)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tyler H »</TD></TR><TR><TD CLASS="quote">However, I do also have for sale:
Excellent condition, it's not like rods wear out. Only three rods. $450 OBO
Modified by Tyler H at 9:57 PM 1/12/2005</TD></TR></TABLE>
Theres only three rods and its not like they were out... lol i couldnt stop laughing at this one
Excellent condition, it's not like rods wear out. Only three rods. $450 OBO
Modified by Tyler H at 9:57 PM 1/12/2005</TD></TR></TABLE>
Theres only three rods and its not like they were out... lol i couldnt stop laughing at this one
Thread Starter
Honda-Tech Member
Joined: Jul 2002
Posts: 824
Likes: 0
From: Los Angeles, CA, USA
Re: FS: AEBS Sleeved H22A1- Brand New! 600+ HP!! (Tyler H)
Still for sale. All my IM's disappeared for some reason, so if you messaged me about this stuff, please message me again. Thanks!
Tyler
Tyler
Joined: Jul 2004
Posts: 3,073
Likes: 0
From: lovely SocaL, CA, united of the states
Re: FS: AEBS Sleeved H22A1- Brand New! 600+ HP!! (Tyler H)
Go Tyler, amazing guy with an amazing setup, chilled with him once at the fontana drag nights, when he left the el camino hanging...when you first struck 10's 
bump
bump