Prices are for pick ups...shipping will be xtra. If there's no price then it's BO.

Please bump if you took a glance.

95 civic HB parts:

blk door panels has one small cut on passenger near the window and one missing weather strip on driver side....sold to , thanks Nick

complete inner door, roll up assemble, everything in the pictures...sold to dang eg, Thanks Jason


Stock exhaust/muffer (I also have the piping but off of a cx)...sold thanks Thi

Aftermarket ES look alike exhaust/muffler w/ 2 1/4 piping...sold to Aktuning...thanks Al

OB0 TB w/o sensor...BO

P28 chipped w/zif socket and nokia cable...BO

2 rear blue tokico shocks HU ....Sold

almost complete power steering system missing only cooling pipe that is mounted in front and the resevoir bottle...40 BO

a set of '99 stock shocks/springs (may fit integ also)...50

95 civic si hub caps....BO

96 civic rear wing west RS lip for coupe...$60 BO

Integra:

a set of 99 springs......30

a set of 99 mud guards/flaps...20

95 LS intake manifold w/fuel rail, injectors....BO
95 LS TB no sensor.......BO
95 almost complete head...BO
95 LS valve cover w/moon cut...BO

Integra shock hats/caps/bolts (complete with all rubbers/nuts)

98 ITR intake manifold....yellow blur

w/fuel rail and blue NOS (similar to B&M ) FPR and Hondata intake gasket. Has a crack near the coolant outlet due to over tightening...I had it welded and smeared w/JB weld but it cracked again b/c of over tightening again..BO

integra engine mounts (only the rear mount, upper tranny mount, and upper driver mount are left)...BO
EDIT: both torque mounts, torque mount bracket, and rear L bracket are sold to cwhiteteg...thanks ben

Timeserts repair kit...complete minus inserts...BO

Action 2MD clutch for all B hydro tranny...used and the disc need to be grind down. Comes w/near pilot and T.O bearings...BO

PLX M300 used for a few months, will include narrowband stimulator (two resistor welded to an O2 sensor plug) so check light wont turn on...make offer

will add more pictures and stuffs later


























--------------------------------------------------------------------------

Modified by ddustin at 4:46 AM 12/1/2004


Modified by ddustin at 5:17 AM 12/1/2004


Modified by ddustin at 5:45 AM 12/1/2004


Modified by ddustin at 8:36 AM 12/1/2004


Modified by ddustin at 7:27 PM 12/1/2004


Modified by ddustin at 8:27 PM 12/6/2004


Modified by ddustin at 8:39 PM 12/6/2004


Modified by ddustin at 5:26 AM 12/7/2004


Modified by ddustin at 6:39 AM 12/7/2004


Modified by ddustin at 4:15 AM 12/8/2004


Modified by ddustin at 7:57 PM 12/8/2004


Modified by ddustin at 4:17 AM 12/10/2004


Modified by ddustin at 12:17 AM 12/29/2004


Modified by ddustin at 3:42 AM 1/31/2005

 

bump

 

bump

 

thanks for the bump

 

Bump before bed

 

 

bump for new user because ddustin conflicts admins

 

hey check your inbox I pmed u about those mounts

 

bump

 

wheres the cut on the door panels? any pics of it?

 

bump!

 

pm'd

 

all PM's replied

 

Cherry Blossom: wheres the cut on the door panels? any pics of it?

The cut is on top near the window...it's less than an inch fine cut. I thought I posted a pictures of it. I'll post it up today


Modified by ddustin at 8:40 PM 12/6/2004

 

Picture is up

 

no AEM CAI?

 

Oh sorry, I have it. It's blue with a little cut but JB welded. No filter.
Picture should be up.

 

sent pm

 

all PMs replied

 

How much you want for each mount. Pm me about that.

 

PMed you crazyeg9

 

I pmed u

 

all PMs replied

 

bump

 

bump...thanks for buying my stuffs guys.