because i am about to pickup a set of rims with a 32+ offset....i want to know if that is too much and will not stick out too far? thanks for any help

 

we just went through this...

https://honda-tech.com/zerothread?id=1059341

 

that thread didn't finish though...the guy said it fit but will post a pic

 

It will be fine. It shouldn't stick out much if any. It will be flush with the fender. Just make sure you aren't too low and make sure you are running decently stiff rates.

 

Say good-bye to your tires and inner fenders unless you are ready to work them a bit.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ekay_jeremy &raquo;</TD></TR><TR><TD CLASS="quote">because i am about to pickup a set of rims with a 32+ offset....i want to know if that is too much and will not stick out too far? thanks for any help</TD></TR></TABLE>

How wide are these wheels? I have a set of 15x7" +38 wheels and they fit without any issues, but +32 is pushing it. It also depends on your tiresize though if you will have to roll fenderlips or not.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmspoonitr &raquo;</TD></TR><TR><TD CLASS="quote">It will be fine. It shouldn't stick out much if any.</TD></TR></TABLE>

Are you sure about that? My +38 15x7 wheels are <u>right</u> on the edge in the rear if I have decent-tread R comps on the car.

 

anyone else?

 

Hahahah George I have the same wheels. Kosei K1 15" +38. My car has a bit of negative camber in the rear so the top of the tire does not stick past the quarter panel, it however does hit the inner lip of the fender liner if I go up driveways and what not.

But aesthetically the wheels do not stick out past the quarter panel. Looking from the back. If I had my rear camber kit in that might be different.

 

u will be fine my advans are 16 x 7, 31mm offset and they r fine i had to raise my car up a half inch, and tighten my suspension up.

 

i saw your last post...do you have any pics?

 

nah not yet sorry man

 

sorry but a quick update i have 32+ offset wheels on my type r and no trouble at all....doesn't stick out too far to my likings or rub what so ever.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ekay_jeremy &raquo;</TD></TR><TR><TD CLASS="quote">

</TD></TR></TABLE>

Sweet *** R, love the offset

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jaedaSC &raquo;</TD></TR><TR><TD CLASS="quote">

Sweet *** R, love the offset</TD></TR></TABLE>

 

I have a set of Modex rims, theyre 16x7 with a +35 offset and they tuck in fine, with no rubbing and my suspension is pretty low at the rear. I'd say you should be ok with 32, try them and see!

 

i did try them....

 

sorry missed that post :?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ekay_jeremy &raquo;</TD></TR><TR><TD CLASS="quote">sorry but a quick update i have 32+ offset wheels on my type r and no trouble at all....doesn't stick out too far to my likings or rub what so ever.



</TD></TR></TABLE>

 

FREEMAN!!!!!! Sorry I had to.

 

 

....try 15x10, +0 offset.

Oh yeah: roll the fenders with said combo.....

 

I rubbed at Summit Point with my SSR TYPE-C's +38 15x7's 205-50VR15 AZENIS, in the rear, stock suspension, 75K miles.

-Victor

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ekay_jeremy &raquo;</TD></TR><TR><TD CLASS="quote">sorry but a quick update i have 32+ offset wheels on my type r and no trouble at all....doesn't stick out too far to my likings or rub what so ever.



</TD></TR></TABLE>

Anymore pics of this car?

 

i'll get some better ones soon