i tried to post in wheel forum , it said im not allowed. but ne ways, i bought advan rg's with i 31 mm offset i my current wheels are 40mm offset so will the rg's stick in or stick out more? is 31 mm ok to use?

 

they will stick out more...

+31 offset is not recommended for an integra

 

31 will not fit without some serious fender modification

 

will the fit a 99 si ??

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99 TYPE R &raquo;</TD></TR><TR><TD CLASS="quote">will the fit a 99 si ??</TD></TR></TABLE>

no, same problems as an integra

 

mother ****** i just bought them brand new in the box, i got a steal on em to wtf why r they for a honda then

 

post specs of the wheels...

size? 4x100? 5x114?

 

they r 4x100 gold 31mmoffset, so they r no good for an si,i think there is 24.5 mm in an inch and 9 mm will be like @5/16 of an inch with the camber on my si now i have about a lil over a 1/4 inch from tire to fender

 

+31 in 4x100 is definately not a Honda fitment

sorry mang

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99 TYPE R &raquo;</TD></TR><TR><TD CLASS="quote">mother ****** i just bought them brand new in the box, i got a steal on em to wtf why r they for a honda then</TD></TR></TABLE>

who told you they were for honda..

it could be the bolt pattern is correct (5x114.3) but the offset is not. AFAIK the RG's come w/+31, +40 in 15x7. it could be different depending on the wheel width, how about you tell us the specs on the wheels you bought.

FYI I have run 2 +38 (15x7) wheels on my R. The ATS complite and Kosei K1, and I had some rubbing issues in the rear under hard cornering.. so as others have advised you could run into problems..

 

wtf the owner said they will fit my car as long as its lowered cause of the camber, so they will not fit at all even if i roll the fenders , i will kill this guy from the wheel shop

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99 TYPE R &raquo;</TD></TR><TR><TD CLASS="quote">wtf the owner said they will fit my car as long as its lowered cause of the camber, so they will not fit at all even if i roll the fenders , i will kill this guy from the wheel shop</TD></TR></TABLE>

you will need to buy a camber kit to get any kind of serious negative camber, simply lowering your car will not get you enough...

with extreme camber comes tire wear problems
even with all this, the answer is still no...+31 is just too extreme of an offset

 

this place wheel choice had a brand new set of rgs in the box, so i was like **** the price was good so i jumped on it, it said fit for 4x100 honda civic, 31mm offset 16 wheels 7.5'' wide sorry for not listen specs

 

damn 7.5in too??

thats just makes it even worse and stick out even more

 

well this guy is gonna get these wheels thron threw his fucken shop and shoved up his ****** ***

 

sorry for the bad news but it sounds like they really wanted to move those wheels and told you a few things that are incorrect

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99 TYPE R &raquo;</TD></TR><TR><TD CLASS="quote">well this guy is gonna get these wheels thron threw his fucken shop and shoved up his ****** ***</TD></TR></TABLE>

take pictures when you shove it to him.

 

well im not really goin to do but he is gonna get a mouthful of ****, i live in pa so thats like 3000 miles from cali, what u guys think i should do ,dont they have to take them back

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99 TYPE R &raquo;</TD></TR><TR><TD CLASS="quote">well im not really goin to do but he is gonna get a mouthful of ****, i live in pa so thats like 3000 miles from cali, what u guys think i should do ,dont they have to take them back </TD></TR></TABLE>

sell them?

 

Actually they might fit depending on how high your car is and how stiff your suspension is.

There is a guy running +20 offset on his integra in the Appearance forum, but they are not that wide. It isn't likely, but they might fit depending on rubber you choose.

You never know til you try.

 

j00 dun got sm0ke blown up j00r azz.

Did you pay with a credit card?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mugen Mike &raquo;</TD></TR><TR><TD CLASS="quote">j00 dun got sm0ke blown up j00r azz.
</TD></TR></TABLE>

Yup.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99 TYPE R &raquo;</TD></TR><TR><TD CLASS="quote">well this guy is gonna get these wheels thron threw his fucken shop and shoved up his ****** ***</TD></TR></TABLE>

e-thugging is ghey

 

i paid with credit card, why did u ask that ?

 

because if they do not cooperate cant u stop payment through ur credit car until u get everything situated?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99 TYPE R &raquo;</TD></TR><TR><TD CLASS="quote">i paid with credit card, why did u ask that ?</TD></TR></TABLE>

If the company deliberately deceived you into thinking the wheels would fit, you may be able to get your credit card company to reverse the charge.