FS: 1997 Prelude Built/Sleeved/Turbo'd
So the time has come for me to sell my baby....It is a 1997 Prelude with 74,xxx miles on the body, 38,xxx miles on the transmission, and 580 miles on this motor, since it was freshly rebuilt and sleeved. Here are her specs and mods.
Engine
-1998 Block (bigger mains 55mm)
-Darton Sleeves (Closed Deck)
-Stock 87mm bore
-Wiseco Forged pistons 87mm (Coated)
-Wiseco Rings
-Crower Forged Rods
-Polished Crank
-Cometic Head Gasket
Head
-NEW 3 angle valve job
-NEW Port and Polished
-NEW Manly Full Valve Train 1mm oversized (Valves, Retainers, Dual Springs)
-NEW Rew rocker assembly (Stock honda rockers)
-Stock cams (Due to 1mm oversized valves)
-AEM Cam Gears
-NEW Crank Balancer
Transmission
-Rebuilt at 30,xxx miles
-NEW ACT Prolite Flywheel
-NEW ACT Street and Strip disc
-NEW ACT Heavy Duty Pressure Plate
Suspension
-NEWSkunk 2 Coilovers
-NEW Tokico 5 way adjustable struts
-DC Strut Bar
-NEW Ball Joint Camber kit
Fuel System
-(4) RC 440cc Injectors
-Plus (2) additional stock injectors
-EFI PMS Fuel system (Advanced piggyback with Standalone capabilites)
-AEM Fuel Rail
-AEM Fuel Pressure Regulator
-HKS EVC (Electronic Valve Controller)
Turbo Kit
-Turbonetics FMAX Kit w/ all chrome piping
Upgraded t3/t4e .50 trim .63 A/R w/ stage 3 compressor wheel ... (Will hold up to 580 bhp)
-Spearco Intercooler
-MAP injector controller
- Revhard manifold
-Tial 38mm High Pressure Wastegate w/ 13 lb spring
-2.5" Custom Downpipe
-All oil feed lines and hoses
-HKS bov
Gauges
Auto Meter Sport Comp.:
-Boost Gauge
-Fuel Pressure
-Wideband
-Volts
-Water Temp.
Body
-Black Widow Front end
-Black Widow Side Skirts
-Wings West rear bumper
-Black Widow Rear end (not on car, brand new)
-Shaved Trunk lid and painted
-Also all Stock body pieces
Exhaust
-2.5" Downpipe
-NEW QTP Electronic Cutout
-3" Testpipe
-3" Exhaust with N1 Muffler
Misc.
-H23 Manual Tensioner (Converted)
-Momo Boot
-Momo Carbon Fiber ****
-Battery relocated to trunk with custom aluminum box.
-NEW Water pump





I am selling the car for personal reasons and money issues right now. This is not the car i want right now in college so i need to get rid of it sadly
. This car is capable of 400hp right now or with a larger turbo much more. The car still has a nice basic tune right now but a more advance tune will yield much more power on the setup. Serious buyers email YouLostt@hotmail.com and i can send more information and more pics.
Since those pics car has been updated with dumptube rerounted back into the douwnpipe loswered more and stock body kit put back on. The car also has 2 sets of wheels and tires (8) total. One set for winter other set for daily driving. Both sets of tires are brand new on the wheels. Shoot me an im too if intrested.
Thanks Chris
Modified by stinger at 9:21 PM 10/24/2004
Modified by stinger at 8:43 AM 10/25/2004
Modified by stinger at 9:19 PM 10/31/2004
Engine
-1998 Block (bigger mains 55mm)
-Darton Sleeves (Closed Deck)
-Stock 87mm bore
-Wiseco Forged pistons 87mm (Coated)
-Wiseco Rings
-Crower Forged Rods
-Polished Crank
-Cometic Head Gasket
Head
-NEW 3 angle valve job
-NEW Port and Polished
-NEW Manly Full Valve Train 1mm oversized (Valves, Retainers, Dual Springs)
-NEW Rew rocker assembly (Stock honda rockers)
-Stock cams (Due to 1mm oversized valves)
-AEM Cam Gears
-NEW Crank Balancer
Transmission
-Rebuilt at 30,xxx miles
-NEW ACT Prolite Flywheel
-NEW ACT Street and Strip disc
-NEW ACT Heavy Duty Pressure Plate
Suspension
-NEWSkunk 2 Coilovers
-NEW Tokico 5 way adjustable struts
-DC Strut Bar
-NEW Ball Joint Camber kit
Fuel System
-(4) RC 440cc Injectors
-Plus (2) additional stock injectors
-EFI PMS Fuel system (Advanced piggyback with Standalone capabilites)
-AEM Fuel Rail
-AEM Fuel Pressure Regulator
-HKS EVC (Electronic Valve Controller)
Turbo Kit
-Turbonetics FMAX Kit w/ all chrome piping
Upgraded t3/t4e .50 trim .63 A/R w/ stage 3 compressor wheel ... (Will hold up to 580 bhp)
-Spearco Intercooler
-MAP injector controller
- Revhard manifold
-Tial 38mm High Pressure Wastegate w/ 13 lb spring
-2.5" Custom Downpipe
-All oil feed lines and hoses
-HKS bov
Gauges
Auto Meter Sport Comp.:
-Boost Gauge
-Fuel Pressure
-Wideband
-Volts
-Water Temp.
Body
-Black Widow Front end
-Black Widow Side Skirts
-Wings West rear bumper
-Black Widow Rear end (not on car, brand new)
-Shaved Trunk lid and painted
-Also all Stock body pieces
Exhaust
-2.5" Downpipe
-NEW QTP Electronic Cutout
-3" Testpipe
-3" Exhaust with N1 Muffler
Misc.
-H23 Manual Tensioner (Converted)
-Momo Boot
-Momo Carbon Fiber ****
-Battery relocated to trunk with custom aluminum box.
-NEW Water pump
I am selling the car for personal reasons and money issues right now. This is not the car i want right now in college so i need to get rid of it sadly
. This car is capable of 400hp right now or with a larger turbo much more. The car still has a nice basic tune right now but a more advance tune will yield much more power on the setup. Serious buyers email YouLostt@hotmail.com and i can send more information and more pics.Since those pics car has been updated with dumptube rerounted back into the douwnpipe loswered more and stock body kit put back on. The car also has 2 sets of wheels and tires (8) total. One set for winter other set for daily driving. Both sets of tires are brand new on the wheels. Shoot me an im too if intrested.
Thanks Chris
Modified by stinger at 9:21 PM 10/24/2004
Modified by stinger at 8:43 AM 10/25/2004
Modified by stinger at 9:19 PM 10/31/2004


