Notices
Vehicles for sale Post vehicles for sale only

Testing Waters: Civic EG hatch shell (black Si) - Wisconsin

Thread Tools
 
Search this Thread
 
Old Oct 14, 2004 | 07:01 PM
  #1  
Shongku's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 793
Likes: 0
Default Testing Waters: Civic EG hatch shell (black Si) - Wisconsin

SOLD to HT member DragInteg

If you need VIN, PM me

10.19.04 Update: Interior Pictures added ... Also organized info to make easier to read

Just need a ball park of what I could probably get for this... I already have an idea what I'm asking...

Will sell if the price is right

<U>INFO SECTION</U> (Feel free to ask for details)

<U>History:</U>
-Purchased in 1998 with 58K miles, stolen within a few months
-Salvage title issued after motor was stolen
-Vehicle received various engine swaps
-Stored in garage every winter except in 2001 & 2002


<U>Body:</U>
-Approximately 85,000 miles
-Very very little rust (feel free ask for pictures, already took some)
-Exterior paint good in most areas except as shown in pictures below
-Sitting on KYB AGX adjustable shocks (front and rear) w/ Neuspeed race springs (2" drop, yellow)

<U>Interior:</U>
-No stereo
-No rear speakers
-No rear speaker panels (uses DX rear panels)
-Everything behind rear seats is not there (tail light covers and strut covers are still there)
-Original cluster sold, now uses another Si cluster
-Original Si driver seat damaged and replaced with DX driver seat


*Note: I also have the EX door panels bought from eg6si and the EG JDM power window kit bought from eBay. Can install these if you wanted them. Looking to get at least $250 for panels and power window setup (includes relay box, wire harness, switches, power window motor)

















Happens when you don't wax the car for so long and let it sun in the sun :\
Bros didn't take care of it when I wasn't around! Those punks!




This part suffered most












Modified by Shongku at 11:18 PM 10/26/2004


Modified by Shongku at 7:39 PM 11/9/2004
Old Oct 15, 2004 | 10:46 AM
  #2  
Shongku's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 793
Likes: 0
Default Re: Testing Waters: Civic EG hatch shell (black Si) - Wisconsin (Shongku)

Woopy doo...
Old Oct 15, 2004 | 01:33 PM
  #3  
Shongku's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 793
Likes: 0
Default Re: Testing Waters: Civic EG hatch shell (black Si) - Wisconsin (Shongku)

Okay I'll jus throw in a CX motor and sell it like that?
Old Oct 15, 2004 | 08:39 PM
  #4  
projekt4dr's Avatar
 
Joined: Jul 2004
Posts: 32
Likes: 0
From: hartland, WI, USA
Default Re: Testing Waters: Civic EG hatch shell (black Si) - Wisconsin (Shongku)

how much do you want with H22? im in WI
Old Oct 15, 2004 | 10:09 PM
  #5  
Shongku's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 793
Likes: 0
Default Re: Testing Waters: Civic EG hatch shell (projekt4dr)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by projekt4dr &raquo;</TD></TR><TR><TD CLASS="quote">how much do you want with H22? im in WI</TD></TR></TABLE>

$5500 ... It was last dyno'd at 185hp and 150 tq in an 88 Prelude chassis... I'd be happy to dyno it after we throw it in the Civic and I assure you the #s will be plus or minus 5hp w/ tq being the same.

Edit: Oh well yes I 4got to add... $4900 without an exhaust system... $5500 was with an exhaust system (2.5" mandrel bent stainless with 2.5" high flo cat)


Modified by Shongku at 2:35 PM 10/16/2004
Old Oct 16, 2004 | 11:33 AM
  #6  
Shongku's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 793
Likes: 0
Default Re: Testing Waters: Civic EG hatch shell (Shongku)

Bump it up
Old Oct 16, 2004 | 12:12 PM
  #7  
EF'n's Avatar
Member
 
Joined: Feb 2002
Posts: 4,005
Likes: 0
From: interlochen, mi, usa
Default Re: Testing Waters: Civic EG hatch shell (Shongku)

so how much for the shell? i dont want to lowball you.
Old Oct 16, 2004 | 12:45 PM
  #8  
Shongku's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 793
Likes: 0
Default Re: Testing Waters: Civic EG hatch shell (revhardracing)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by revhardracing &raquo;</TD></TR><TR><TD CLASS="quote">so how much for the shell? i dont want to lowball you.</TD></TR></TABLE>

Looking to sell it at around 1000
Old Oct 16, 2004 | 05:43 PM
  #9  
Shongku's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 793
Likes: 0
Default Re: Testing Waters: Civic EG hatch shell (black Si) - Wisconsin (Shongku)

ttt
Old Oct 16, 2004 | 06:05 PM
  #10  
P h i l's Avatar
Honda-Tech Member
 
Joined: Apr 2004
Posts: 794
Likes: 1
From: Milwaukee, wi, IRAQ
Default Re: Testing Waters: Civic EG hatch shell (Shongku)

will you trade im in milwaukee
Old Oct 16, 2004 | 06:29 PM
  #11  
Shongku's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 793
Likes: 0
Default Re: Testing Waters: Civic EG hatch shell (crxhf89)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crxhf89 &raquo;</TD></TR><TR><TD CLASS="quote">will you trade im in milwaukee </TD></TR></TABLE>

The only trades I'm considering is something I can sell easily that'd get me around my $970 firm price
Old Oct 16, 2004 | 08:32 PM
  #12  
Shongku's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 793
Likes: 0
Default Re: Testing Waters: Civic EG hatch shell (black Si) - Wisconsin (Shongku)

Bump
Old Oct 17, 2004 | 12:20 PM
  #13  
P h i l's Avatar
Honda-Tech Member
 
Joined: Apr 2004
Posts: 794
Likes: 1
From: Milwaukee, wi, IRAQ
Default Re: Testing Waters: Civic EG hatch shell (Shongku)

Its a 91 eclipse gs it needs a new head its also got some crome 17's its black on black 5spd
Old Oct 17, 2004 | 01:18 PM
  #14  
Shongku's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 793
Likes: 0
Default Re: Testing Waters: Civic EG hatch shell (crxhf89)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crxhf89 &raquo;</TD></TR><TR><TD CLASS="quote">Its a 91 eclipse gs it needs a new head its also got some crome 17's its black on black 5spd</TD></TR></TABLE>

No thx
Old Oct 17, 2004 | 01:34 PM
  #15  
101block92's Avatar
 
Joined: Jul 2004
Posts: 30
Likes: 0
From: aiken, sc, us
Default Re: Testing Waters: Civic EG hatch shell (Shongku)

im in sc would you will in to drive half way i pay your gas if not how much do think shippin is on somthin like that
Old Oct 17, 2004 | 03:08 PM
  #16  
Shongku's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 793
Likes: 0
Default Re: Testing Waters: Civic EG hatch shell (101block92)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 101block92 &raquo;</TD></TR><TR><TD CLASS="quote">im in sc would you will in to drive half way i pay your gas if not how much do think shippin is on somthin like that</TD></TR></TABLE>

Hmm might have to use a vehicle transporter... they don't really care about weight, just about size... it's really not worth it for shipping... best if you buy a plane ticket and then drive it home ...

Drive it half way? With a sohc in the car? or the H22? Let me know

thx
Old Oct 17, 2004 | 03:43 PM
  #17  
101block92's Avatar
 
Joined: Jul 2004
Posts: 30
Likes: 0
From: aiken, sc, us
Default Re: Testing Waters: Civic EG hatch shell (Shongku)

well i have a h22 already which why im lookin for a shell so really not worth it to me to pay you more to put a motor in it when im just goin to swap it. if i can find someone stupid enough ill just make a road trip but ill let u know.
Old Oct 17, 2004 | 04:00 PM
  #18  
Shongku's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 793
Likes: 0
Default Re: Testing Waters: Civic EG hatch shell (101block92)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 101block92 &raquo;</TD></TR><TR><TD CLASS="quote">well i have a h22 already which why im lookin for a shell so really not worth it to me to pay you more to put a motor in it when im just goin to swap it. if i can find someone stupid enough ill just make a road trip but ill let u know.</TD></TR></TABLE>

K well let me know soon I'll leave my shell up for maybe another week before I try other methods of selling it
Old Oct 17, 2004 | 05:30 PM
  #19  
Shongku's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 793
Likes: 0
Default Re: Testing Waters: Civic EG hatch shell (Shongku)

Old Oct 18, 2004 | 12:37 AM
  #20  
Shongku's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 793
Likes: 0
Default Re: Testing Waters: Civic EG hatch shell (black Si) - Wisconsin (Shongku)

Hmm so far the test results say I should put in the JDM H22... 185whp 150 tq... 270 all around... and it's bone stock... hmm talk about potential ^^ and good egg! woah... Alrite I'm getting hyped up... time to gather the parts ONE more race is coming up and I cant miss it (this saturday)
Old Oct 18, 2004 | 05:43 PM
  #21  
Shongku's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 793
Likes: 0
Default Re: Testing Waters: Civic EG hatch shell (black Si) - Wisconsin (Shongku)

Old Oct 18, 2004 | 05:48 PM
  #22  
Superhatch's Avatar
Honda-Tech Member
20 Year Member
 
Joined: May 2001
Posts: 2,532
Likes: 1
From: MKE
Default Re: Testing Waters: Civic EG hatch shell (Shongku)

Interested.....PM Sent.
Old Oct 18, 2004 | 06:26 PM
  #23  
pearlcfcivic97's Avatar
Honda-Tech Member
 
Joined: Sep 2003
Posts: 1,198
Likes: 0
From: Racine, WI, USA
Default

pm sent...
Old Oct 18, 2004 | 09:37 PM
  #24  
Shongku's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 793
Likes: 0
Default Re: Testing Waters: Civic EG hatch shell (Superhatch)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Superhatch &raquo;</TD></TR><TR><TD CLASS="quote">Interested.....PM Sent. </TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pearlcfcivic &raquo;</TD></TR><TR><TD CLASS="quote">pm sent...</TD></TR></TABLE>

PMs REPLIED



Now guys... I know it doesn't matter but this car is my baby! She's been with me since fall of 98 and I've never driven her in winter, but my brother did need a car and he did drive it for 2 winters... and well he was a bit terrible at taking care of the car when I was away and the paint! omg the paint! hehe

but yes yes locally this car is well known and even has its own name ^^

What is more obvious than a name like "Blacky"? haha OMG I dunno why they had to name my car.
Old Oct 18, 2004 | 09:47 PM
  #25  
Shongku's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Apr 2004
Posts: 793
Likes: 0
Default Re: Testing Waters: Civic EG hatch shell (Shongku)

Since it's late and I'm bored I'll just talk about the history of this car...

Fall of 98, bought.
early Winter of 98, stolen. damn thieves!
sat in garage til spring of 2000, swapped with LS motor. all seats out. 14.44@93mph (NT555R)
threw cams in LS. not stripped. 14.52 @95mph (street tires)
threw VTEC head on in summer. not stripped. 13.98@95mph (slicks)
took out LS VTEC in early winter of 2000, threw sohc vtec back in spring 2001.
Turbo added to sohc vtec in spring of 2002. full interior. 12.8x @ 108mph (silcks 15psi)
sohc vtec blew at track. threw ls turbo in, lil bro blew it up street racing late fall 2002.
car has been sitting since. (I was away and this is where the paint started being eaten alive by the sun's rays with the help of rain, as shown in pix).

Hmm well that's it... I can't seem to locate the front bumper! it's supposed to be at my old house which was sold and well i dunno if the new owner toss'd it (which i would assume they did)





All times are GMT -8. The time now is 07:07 PM.