HUGE Garage Sale - Portflow, Toda, GSR stuff, Wiseco, Eagle, etc etc.
Thread Starter
Honda-Tech Member
Joined: Oct 2001
Posts: 1,457
Likes: 0
From: west, ma, usa
HUGE Garage Sale - Portflow, Toda, GSR stuff, Wiseco, Eagle, etc etc.
I have to sell all this stuff...I just did a B18A swap into my civic and no longer have any need for all these parts. Right now they're just occupying space in my bedroom. 
I have plenty of vouches...Berkel, Sonic, Gamby, keithv, JCushing, Owen_the_Soyboy, Tbone, cyrk007, JalopySir, etc etc etc.
<U>Stuff that is still available!:</U>
<U>B18C1 GSR OBD1 Intake Manifold</U>
85k miles. All sensors/hoses, etc intact. Comes with stock fuel injectors/rail.
$100 shipped.
<U>B18C1 GSR OBD1 Throttle Body</U>
85k miles. All sensors except MAP sensor intact. I can include one from a OBD1 B18A though (will work the same). The plastic housing around the TPS sensor is damaged but the sensor still works and the plug from the harness still plugs in (may need to be zip tied for insurance). It is pictured in the above pic of the intake mani...it's still bolted to it.
60 shipped.
<U>B18C1 USDM P72 Pistons/Rods</U>
These have 85k miles on them. They were running fine when I took them out. They need new rings.
$75 shipped.
<U>B18C1 OBD1 Oil Pump</U>
85k miles. Was working when I removed it.
$55 shipped.
<U>NEW OEM B18B1 OBD2 Oil Pump/NEW OEM B18C1 Distributor O-Ring</U>
These are brand new and never used. They are all pictured here:
Oil Pump is $85 shipped.
Distrib. O-ring is best offer. I could include this free with the purchase of a head or anything else.
<U>OBD1 B18C1 Engine Wire Harness and OBD1 B18A1 Engine Wire Harness</U>
Both these harnesses are complete. One came out of a '95 Integra GSR and the other out of a '92 Integra. Both are OBD1.
B18C1 harness is $125 shipped. B18A1 harness is $100 shipped.
<U>NEW B18C1 Lower End Gasket Set (oil pan, crank seals, o-rings, etc)</U>
New and unopened.
Lower End Gasket Set is $50 shipped.
<U>Meziere Electric Water Pump </U>
Great condition. Used for 15k miles. Have everything it came with - mounting bracket, 22 tooth block off plate, all wires, even the lower radiator hose to fit a b18c. Works perfectly.
Asking $275 shipped/OBO.
<U>Unorthodox Racing Crank Pulley for B-Series</U>
Balanced at machine shop. Used for 15k miles.
$115 shipped.
<U>B18C Crank Pulley</U>
Stock crank pulley. Fully balanced at machine shop.
$45 shipped.
<U>All sorts of GSR block parts (water tubes, windage trays, oil pickups, sensors, etc etc etc - just ask if I have it)</U>
<U>Air Intake Tube w/Cone Filter - fits in DC/EG chasis</U>
$50 shipped.
<U>DC Integra Rear Trailing Arms/Upper Control Arms/Knuckles</U>
For doing a rear disc conversion on EG's.
$150+shipping OBO.
<U>DA Driv. Side Axle</U>
$50 shipped.
<U>I also have other stuff for sale in these ads:</U>
https://honda-tech.com/zerothread?id=973880
https://honda-tech.com/zerothread?id=973860
Please send me an IM on here or contact me on AIM...my sn is dlric. I can also be emailed at dlric@yahoo.com.
I accept paypal at dlric@yahoo.com. I will also accept money orders and cash!
Please no lowballers/flakers! I'm flexible on prices if the offers are reasonable.
Thanks for looking!
<U>Stuff that has been SOLD:</U>
<U>Portflow B18C1 Cylinder Head</U> - SOLD!
<U>Toda Spec B Camshafts with Skunk2 Cam Gears</U> - SOLD!
<U>Yoshio/Godspeed Chipped P72 OBD1 ECU for Toda B's</U> - SOLD!
<U>1994 B18C1 Cylinder Head</U> - SOLD!
<U>(2) B18C1 Valve Covers</U> - Both Valve Covers have been SOLD!
<U>Golden Eagle B18C1 Block</U> - SOLD!
<U>ImportBuilders/Wiseco 11.8:1 84mm Pistons and Eagle H-Beam Rods</U> - SOLD!
<U>B18C1 Crankshaft</U> - SOLD!
Tensioner Pulley + spring - SOLD!
<U>Moroso Oil Pan for B18C1</U> - SOLD!
<U>B18C1 Intake Manifold Gasket</U> - SOLD!
Modified by dlric at 11:28 AM 12/3/2004
I have plenty of vouches...Berkel, Sonic, Gamby, keithv, JCushing, Owen_the_Soyboy, Tbone, cyrk007, JalopySir, etc etc etc.
<U>Stuff that is still available!:</U>
<U>B18C1 GSR OBD1 Intake Manifold</U>
85k miles. All sensors/hoses, etc intact. Comes with stock fuel injectors/rail.
$100 shipped.
<U>B18C1 GSR OBD1 Throttle Body</U>
85k miles. All sensors except MAP sensor intact. I can include one from a OBD1 B18A though (will work the same). The plastic housing around the TPS sensor is damaged but the sensor still works and the plug from the harness still plugs in (may need to be zip tied for insurance). It is pictured in the above pic of the intake mani...it's still bolted to it.
60 shipped.
<U>B18C1 USDM P72 Pistons/Rods</U>
These have 85k miles on them. They were running fine when I took them out. They need new rings.
$75 shipped.
<U>B18C1 OBD1 Oil Pump</U>
85k miles. Was working when I removed it.
$55 shipped.
<U>NEW OEM B18B1 OBD2 Oil Pump/NEW OEM B18C1 Distributor O-Ring</U>
These are brand new and never used. They are all pictured here:
Oil Pump is $85 shipped.
Distrib. O-ring is best offer. I could include this free with the purchase of a head or anything else.
<U>OBD1 B18C1 Engine Wire Harness and OBD1 B18A1 Engine Wire Harness</U>
Both these harnesses are complete. One came out of a '95 Integra GSR and the other out of a '92 Integra. Both are OBD1.
B18C1 harness is $125 shipped. B18A1 harness is $100 shipped.
<U>NEW B18C1 Lower End Gasket Set (oil pan, crank seals, o-rings, etc)</U>
New and unopened.
Lower End Gasket Set is $50 shipped.
<U>Meziere Electric Water Pump </U>
Great condition. Used for 15k miles. Have everything it came with - mounting bracket, 22 tooth block off plate, all wires, even the lower radiator hose to fit a b18c. Works perfectly.
Asking $275 shipped/OBO.
<U>Unorthodox Racing Crank Pulley for B-Series</U>
Balanced at machine shop. Used for 15k miles.
$115 shipped.
<U>B18C Crank Pulley</U>
Stock crank pulley. Fully balanced at machine shop.
$45 shipped.
<U>All sorts of GSR block parts (water tubes, windage trays, oil pickups, sensors, etc etc etc - just ask if I have it)</U>
<U>Air Intake Tube w/Cone Filter - fits in DC/EG chasis</U>
$50 shipped.
<U>DC Integra Rear Trailing Arms/Upper Control Arms/Knuckles</U>
For doing a rear disc conversion on EG's.
$150+shipping OBO.
<U>DA Driv. Side Axle</U>
$50 shipped.
<U>I also have other stuff for sale in these ads:</U>
https://honda-tech.com/zerothread?id=973880
https://honda-tech.com/zerothread?id=973860
Please send me an IM on here or contact me on AIM...my sn is dlric. I can also be emailed at dlric@yahoo.com.
I accept paypal at dlric@yahoo.com. I will also accept money orders and cash!
Please no lowballers/flakers! I'm flexible on prices if the offers are reasonable.
Thanks for looking!
<U>Stuff that has been SOLD:</U>
<U>Portflow B18C1 Cylinder Head</U> - SOLD!
<U>Toda Spec B Camshafts with Skunk2 Cam Gears</U> - SOLD!
<U>Yoshio/Godspeed Chipped P72 OBD1 ECU for Toda B's</U> - SOLD!
<U>1994 B18C1 Cylinder Head</U> - SOLD!
<U>(2) B18C1 Valve Covers</U> - Both Valve Covers have been SOLD!
<U>Golden Eagle B18C1 Block</U> - SOLD!
<U>ImportBuilders/Wiseco 11.8:1 84mm Pistons and Eagle H-Beam Rods</U> - SOLD!
<U>B18C1 Crankshaft</U> - SOLD!
Tensioner Pulley + spring - SOLD!
<U>Moroso Oil Pan for B18C1</U> - SOLD!
<U>B18C1 Intake Manifold Gasket</U> - SOLD!
Modified by dlric at 11:28 AM 12/3/2004
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Oct 2001
Posts: 1,457
Likes: 0
From: west, ma, usa
Re: (dlric)
bump again
might be willing to do some trades...interested in sohc stuff...specifically need a crx/civic si cable tranny, obd0 engine harness, crx stock exhaust (cat back), d16z6/y8 motor, etc.
might be willing to do some trades...interested in sohc stuff...specifically need a crx/civic si cable tranny, obd0 engine harness, crx stock exhaust (cat back), d16z6/y8 motor, etc.