*** FS: Clutchmasters 6-puck for Cable B-Series, EG A/C stuff, DC engine mounts,
Thread Starter
Honda-Tech Member
Joined: Oct 2001
Posts: 1,457
Likes: 0
From: west, ma, usa
*** FS: Clutchmasters 6-puck for Cable B-Series, EG A/C stuff, DC engine mounts,
All stuff for sale - will accept any <U>reasonable</U> offer!
*Clutchmasters Stage 4 6-puck Springless Clutch + Pressure Plate for Cable B-series (smaller spline) - SOLD!
*EG A/C system - all the underhood components. I pulled this out of my '93 Del Sol S. It was working perfectly at the time - I just wanted to shed some weight.
Includes compressor, condensor, all lines, all wiring, everything under the hood. Accepting all reasonable offers on this. Willing to ship.
*DC Rear Tranny "T" Mount Bracket
Accepting B.O. on this.
*DC Timing Belt Side Engine Mount Bracket
Accepting B.O. on this.
*DC Driver Side Engine Mount
Accepting B.O. on this as well.
*EG Test Pipe 2" Inner Diameter
The test pipe has both flanges. The 3-bolt B-pipe end flange is welded on. The other flange that bolts to a header is a bracket flange that slides around. When I took the pic, I should have moved the header bracket flange to the correct end of the pipe. This test pipe bolted to my gsr exhaust manifold and usdm type-r exhaust manifold perfectly. There is no O2 bunge welded on so I don't know if it would work for obd2 but it worked for my obd1 setup. Accepting B.O. on this.
I have tons of vouches - Tbone, keithv, sonic, berkel, owen_the_sowboy, cyrk007, jcushing, gamby, etc.
Thanks!
Modified by dlric at 11:15 AM 1/5/2005
*Clutchmasters Stage 4 6-puck Springless Clutch + Pressure Plate for Cable B-series (smaller spline) - SOLD!
*EG A/C system - all the underhood components. I pulled this out of my '93 Del Sol S. It was working perfectly at the time - I just wanted to shed some weight.
Includes compressor, condensor, all lines, all wiring, everything under the hood. Accepting all reasonable offers on this. Willing to ship.
*DC Rear Tranny "T" Mount Bracket
Accepting B.O. on this.
*DC Timing Belt Side Engine Mount Bracket
Accepting B.O. on this.
*DC Driver Side Engine Mount
Accepting B.O. on this as well.
*EG Test Pipe 2" Inner Diameter
The test pipe has both flanges. The 3-bolt B-pipe end flange is welded on. The other flange that bolts to a header is a bracket flange that slides around. When I took the pic, I should have moved the header bracket flange to the correct end of the pipe. This test pipe bolted to my gsr exhaust manifold and usdm type-r exhaust manifold perfectly. There is no O2 bunge welded on so I don't know if it would work for obd2 but it worked for my obd1 setup. Accepting B.O. on this.
I have tons of vouches - Tbone, keithv, sonic, berkel, owen_the_sowboy, cyrk007, jcushing, gamby, etc.
Thanks!
Modified by dlric at 11:15 AM 1/5/2005
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Oct 2001
Posts: 1,457
Likes: 0
From: west, ma, usa
Re: *** FS: Clutchmasters 6-puck for Cable B-Series, EG A/C stuff, DC engine mounts, (dlric)
buy the clutch or i'll be forced to buy a cable tranny to use with it and drop it in my crx 
