help i need 99-00 fog light instructions well just pic of the bezel cut out in bumper thanks
ok like it says i just want a pic of the cut out in the bumper so i dont screw mine up please help i searched and found nothing thanks in advance!!!!!!!!!!!
http://www.handaaccessories.co...s.pdf <---- you need ADOBE READER to view
follow the instructions - the are 7 dots (on each side) on the inside of the bumper where you need to poke through w/a pushpin. Then you need the correct size hole saw (actually a large drill bit) to drill out where you marked the holes. then use a jig saw or other to connect the holes you drilled out.
if you do NOT have an OEM bumper then you MAY NOT have the markings for where to drill...or holes to mount the metal brackets
EDIT did you do a 99-00 front end conversion??? I see you have a 96 hatch
those fogs will NOT fit a 96-98 bumper BTW
Modified by adirondackR at 9:03 AM 10/5/2004
follow the instructions - the are 7 dots (on each side) on the inside of the bumper where you need to poke through w/a pushpin. Then you need the correct size hole saw (actually a large drill bit) to drill out where you marked the holes. then use a jig saw or other to connect the holes you drilled out.
if you do NOT have an OEM bumper then you MAY NOT have the markings for where to drill...or holes to mount the metal brackets
EDIT did you do a 99-00 front end conversion??? I see you have a 96 hatch
those fogs will NOT fit a 96-98 bumper BTWModified by adirondackR at 9:03 AM 10/5/2004
close thread i went to honda and got a whole book of instructions for free very very good instructions
Thread
Thread Starter
Forum
Replies
Last Post
funvtec
Honda Civic / Del Sol (1992 - 2000)
8
Nov 30, 2009 07:19 AM
pinoyboy204
Honda Civic / Del Sol (1992 - 2000)
7
Sep 1, 2007 11:58 PM
=SnEekY-Dc5=
Honda / Acura
10
Apr 3, 2007 01:46 PM
Fallen86
Honda Civic / Del Sol (1992 - 2000)
2
Jun 22, 2006 01:19 AM
Tomatohatch
Honda / Acura
1
Jan 12, 2005 05:41 PM




