I will Part this out.

See post further down for details

Forsale DART 2.1L talldeck stroker shortblock PRICE REDUCED $2100 SHIPPED ANYWHERE IN THE 48 STATES

NOTE: has a spun main bearing

SPECS:

Dart Talldeck block (fully deburred many many hours of prep)
Wiseco 11.7:1 Pistons, 84.5 mm bore
Eagle 5.967 rods
Scat 95MM crank
Honda Waterpump
Honda Oil pump
Honda LS oil pump pick up
Honda LS Windage tray
Honda Oil Pan

I also have Endyn/Wiseco 10:1 84.5mm pistons that can be used in this motor
2 extra 5.967 rods (need clean up)
Possibly a 95mm Eagle Crank (might be sold)

I inspected the motor and found all four rod bearings look perfect. Pistons look normal, cylinder walls still have nice crosshatch.







Pulled the main caps............center main had just started to rotate/spin it moved about 1-2mm counterclockwise.








The good news is that the motor is easlily rebuildable, the bad news is that it is already out of the car and I purchased a new B18C5

Here is a pic of the motor in the car:



All of the previous threads regarding /during build-up

https://honda-tech.com/zerothread?id=890828

https://honda-tech.com/zerothread?id=971012

https://honda-tech.com/zerothread?id=980028

https://honda-tech.com/zerothread?id=981668


I will take Paypal, Money order, cashers check,

I will also take 3 non refundable lump payments over a 3 month period
Ex. $1000 downpayment, $1000 month later and $700 final payment.
Motor stays with me until paid in full.

IM me here or email Matjen@hotmail.com put "DART" in title.

MANY MANY referances here.

Matt Jensen


Modified by Dropspeed at 10:49 PM 9/30/2004


Modified by Dropspeed at 8:25 AM 10/5/2004


Modified by Dropspeed at 3:40 PM 10/15/2004


Modified by Dropspeed at 9:10 AM 11/6/2004


Modified by Dropspeed at 9:53 PM 11/22/2004


Modified by Dropspeed at 10:54 PM 11/24/2004

 

updated pictures

 

Very nice of you to offer a payment plan like that!

Good luck on the sale.

Buy this powerhouse motor, the seller is legit

 

good luck. free bump.

 

bumped

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bbasso &raquo;</TD></TR><TR><TD CLASS="quote">Very nice of you to offer a payment plan like that!

Good luck on the sale.

Buy this powerhouse motor, the seller is legit </TD></TR></TABLE>

Thanks, I am realistic about most people dropping $2700 at one time. I am in no hurry to sell............................Just want it to go to a good home and see it alive again.

Mattj

 

bump

good seller

all true players have rolled on SSR comps...


Modified by FlySi at 6:01 PM 10/2/2004

 

Price reduced to[B] $2500[/B

Mattj

 

Make an offer, Can ship out Monday

 

Anyone, Any questions, Any problems, Make offers, Send questions ECT&gt;

Mattj

 

bump....sure wish i could afford this thing.....but alas....i see K in my future

 

Special Price for Chad

 

PRICE REDUCED AGAIN $2300

Mattj

 

bump

 

this is a bit off the topic but, what type of header did you use for the increase in deck height? I was considering switching to a 2.0 L CRV block with toda internals in place of the standard 1.8L on one of my Integras. I was advised that there would be some issues trying to find the proper header, i.e. I would need to have one fabricated.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by justink4 &raquo;</TD></TR><TR><TD CLASS="quote">this is a bit off the topic but, what type of header did you use for the increase in deck height? I was considering switching to a 2.0 L CRV block with toda internals in place of the standard 1.8L on one of my Integras. I was advised that there would be some issues trying to find the proper header, i.e. I would need to have one fabricated.</TD></TR></TABLE>

A 2.0 does not have increased deck height so your advisor was wrong. A talldeck does require an aftermarket header, or you can take any 2 piece header and add a 1/2" flandge in the middle to make it work.

 

interesting, can you still use a B18c timing belt?

 

taking offers

 

Anything wrong with the price, part servicce ECT?

 

MAKE AN OFFER NEED TO MOVE THIS!!!!!!!!!!!!!

Mattj

 

Will seperate parts

Is Cranks, Rods, Pistons, Block ECT

BUY this stuff

 

I will part this out!!!!

DARt Tall deck block (perfect)

Eagle 5.967 Rods (Perfect)

Scat 95mm Crank (good/could use micropolich on center main journal)

Stock Oil Pan (Brand new/never used)

84mm Wiseco pistons 11:7.1 (1500 miles)

Windage tray, oil pump pickup......ECT

Make Offers

MAttj

 

great christmas gift

 

That motor is sick!! bump for you. Have met this guy in person. Great guy, and very legit.

 

NOOOO....dont part out that beauty, bump for a sick bottom-end. If it was a woman id slap her on the ***!hehehehehe