Just finished reading an article in HondaTuning magazine. They took a D16A6 and built a High Compression Stroker using D17A7 internals... it was really quite impressive.... 171whp

Just thought id share.

 

that would be interesting if you see a lot of civics older than 01 doing this. Wonder if a d18 will come out and do the same thing to the d17 as they are doing to the d16.

 

D17 was the end of the D series. the next low end motors of the honda world are the R series motors.

 

so you're saying they're done with the d's and going to r's in the newer civics or they have already?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by oddmut &raquo;</TD></TR><TR><TD CLASS="quote">so you're saying they're done with the d's and going to r's in the newer civics or they have already?</TD></TR></TABLE>

They have already. The 8th gen. Civic has an R-series engine, in the base model.

 

lol. i feel so smart -_-.

 

yea sorry i shouldve said that @ the beginning. as far as potential going or mixing parts from both, i dont know

 

i wanna make a D19 or pissibly D20 if there's enough room

 

d24 with a d20 head sounds good to me.. a whopping 112 whp.... with vtek yo!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DsevenEm2 &raquo;</TD></TR><TR><TD CLASS="quote">d24 with a d20 head sounds good to me.. a whopping 112 whp.... with vtek yo!</TD></TR></TABLE>
you're an idiot....

obviously you dont understand the d19 or d20 comment

 

Sorry to bring this back from the dead. But I was thinking about stroking a D16A6 like that, with the D17, then putting a z6 head on it. They got 171 outta a non-VTEC. What do you guys think the potential could be? ? ?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kyoh &raquo;</TD></TR><TR><TD CLASS="quote">Sorry to bring this back from the dead. But I was thinking about stroking a D16A6 like that, with the D17, then putting a z6 head on it. They got 171 outta a non-VTEC. What do you guys think the potential could be? ? ?</TD></TR></TABLE>

It'd be better to ask the guys in the All Motor forum. None of the members in this forum have a D16 in their 2001-2005 Civics.

 

I'd bet some serious cash there are VERY few parts that interchange from the R to D series.

 

That is what I believe to be the so called mythical "Super D". Word in the Honda Challenge paddock is that the motor doesnt last long enough to make it of any use.

 

hey i didnt even know sujak responded to my post.. dick..

 

go with the 1.6l chevy aveo block......eco-tec ftw

 

use connetcting rods made out of a 2x4

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by germanboy123 &raquo;</TD></TR><TR><TD CLASS="quote">use connetcting rods made out of a 2x4</TD></TR></TABLE>

You haven't been here long enough to be a dick yet. Watch yourself, you can make enemies very quickly.

 

^because nothing is more terrorizing than online forum e-enemies lolz

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by skipbarber &raquo;</TD></TR><TR><TD CLASS="quote">^because nothing is more terrorizing than online forum e-enemies lolz</TD></TR></TABLE>

Lol...

They can be much more terrorizing then you think.

This Internet is serious business.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thinknology &raquo;</TD></TR><TR><TD CLASS="quote">


This Internet is serious business.</TD></TR></TABLE>


lmfao

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spun Vtec &raquo;</TD></TR><TR><TD CLASS="quote">


lmfao</TD></TR></TABLE>