as most of you know when you lower a first gen it pulls to hole chassis to the left causeing the right tire and rim to rub a bit ,So i had to make a ajustable panhard bar ,played with it a bit and got the axle back to center havent painted it yet and its not the best but it will work ,im going to get a bigger rodend for the one side since it looks kinda funny and the other one has a grease nipple so id like to have sqweek free driving for a long time

here are the pics


haha look at that little guy ,its a 3/8 rodend just like the other ,but for some reaon when i ordered them in this is what i got ,so it will have to do for now

test fit ,looks way better then that junk on the ground lol



Modified by phatboycrxhf at 12:04 AM 5/12/2007


Modified by phatboycrxhf at 3:47 AM 6/1/2007

 

looks good. i think they make those for mini trucks when the bag them.

 

Correct they have them for mini trucks when you two link them... it is for the stress on the link bars from the rear end shifting... I also have a mini truck a 2000 gmc sonoma single cab that is bagged and Traditional body droped 6 1/4"...

 

how about some shots of the car?

 

i would have posted pics of my car ,but last time i did it just got me mad ,the comments made were very childish and uncalled for I'll give you one to give you an idea

the hole undercarriage has been sandblasted ,new floor pans have been made and welded in ,then the interior was sandblasted painted and primed ,
i had alot of mods dont to the car ,f1 fenders ,there gone ,rear bumper i made ,gone skirts gone ,its all stock now ,it has a 87 si engine and trans,headman header ,CAI stage 2 cam straight 2 1/4 dual die exit exhaust ,wires plugs and a few other little things .jacsonreacing springs in the rear , brembo/lightspped rotors ,new in the box and havent been made since the early 90's short shifter fender trusses and a few other things lol
this the only one i have now ,the doors look like **** because i just ripped off fiberglass in hald there from molding the door



engine bay


before the pump and regulator and fuel pressure gauge



Modified by phatboycrxhf at 11:43 AM 5/12/2007

 

sweet

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DaNnYsEvEn &raquo;</TD></TR><TR><TD CLASS="quote">

sweet </TD></TR></TABLE>

Is it boosted? Or are you suffocating the carbs/TB's?

 

no its not boosted i was just playin around with the welder ,trying to come up with a diffrent filter instead of having the normal ones out there installed on the carbs ,i do not have these carbs installed at the moment ,i have a stock carb ,but when i have all the body work done im going to find a set of weber side drafts

i relized after that the back carbs would be starved or the first 2 would get to much air ,sssssssooooooooooo that little sucker is sitting on the shelf lol

 

primed the bar last night ,im thinking about painting it blue wuth a silver base coat and a few coats of clear

 

Ya last time people were dicks...fack em. Most of them don't know what the expletive they are talking about anyways, it made me upset too And those that know what they are talking about...don't know how to communicate on the net, putting people down for no reason...it's bullshit. This place should be about learning not ******* people over for fun.


Good job on the bar

 

nice work , this is a technical forum if the asshats dont like your stuff screw them, this forum is for people to help each other out, not criticize the work they dont have the skills to do. If you cant help out dont post, sorry , end rant


Modified by Crx Jimmy at 9:25 PM 5/15/2007

 

nice work
subscribed

 

i miss my ballade ...the bay looks beautiful

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 89civicdx &raquo;</TD></TR><TR><TD CLASS="quote">Ya last time people were dicks...fack em. Most of them don't know what the expletive they are talking about anyways, it made me upset too And those that know what they are talking about...don't know how to communicate on the net, putting people down for no reason...it's bullshit. This place should be about learning not ******* people over for fun.

Good job on the bar
</TD></TR></TABLE>

that they were but im over it now ,i know what i can do and where my skill is at ,i know im not the best ,but i think ive come along way,I have people coming to me for body work all the time ,so my work must be allright lol and too judge something that isnt dumb is just stupid ,most car guys can picture the finished peice ,but i guess the ones that made the comments could not ,which is allright ,but there was no need for comments like that any other site those people would have been banned ,but whatever

the bar is being painted tomorow its been raining and alittle cold too paint

thanks for all the nice comments guys

 

I love to see the first gens getting cleaned up and put to good use. Oh I parked next to a clean one today at sears btw

 

lets see the older pics and why it was made fun of!


the newer pics looks great.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by low91rex &raquo;</TD></TR><TR><TD CLASS="quote">I love to see the first gens getting cleaned up and put to good use. Oh I parked next to a clean one today at sears btw </TD></TR></TABLE>
lol right on, i wish i could see a crx in my area lol all i see is jacked up trucks and mustangs lol

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ &raquo;</TD></TR><TR><TD CLASS="quote">lets see the older pics and why it was made fun of!
the newer pics looks great. </TD></TR></TABLE>
lol thanks sure I'll post one i just everyone thought it was riced out ,so what ,i have to drive it ,and all the work was done with welded steel or fiberglass cloth and resin ,not plastic bondo

here ya go

 

 

i remember that car!!!


i think i actually said positive comments about the hood.


i dont mind the taillights. theyre not super terrible.

 

Im sorry, but that is not a very good looking first gen. But I give you props for the amount of time that must have taken. Good job.

 

LOL well its all gone now i was so made and ready to go to winnipeg and bust heads ,comments really dont bother me ,but when i was called a redneck ricer from a guy in winnipeg .i was ready to go on a road trip ,few hour drive and i know people in the city that most likely know his car or him but instead i took it out on the hood ,alot better then being charged for beating the snot out of someone lol Its one thing to talk smack on the net ,but id like to see someone do it to my face (most dont have the ***** ) and when they do they have a gang standing with them ,that atleast what i noticed when i lived in winnipeg

 

yeah well.

BLAME CANADA!!! BLAME CANADA!!! baaaaaaaaaaaaaahahahhaa

 

very nice, rod rod is the best way to do a panhard bar

Threads like this keep me coming back to HT

 

lol right on ,no its not canada it some of the people living here <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ace$nyper &raquo;</TD></TR><TR><TD CLASS="quote">very nice, rod rod is the best way to do a panhard bar

Threads like this keep me coming back to HT </TD></TR></TABLE>

thank you very much i really appreciate that

 

sorry guys i havent updated on the bar ,ive been doing body work on the crx ,so its going to have to wait untill i get that out of the way allmost ready to spray the car , pulled a all nighter last night on it ,by the time i had the front bumper nice and ready to go it was allmost 6 am lol here are some pics from last night
all together i removed 4 diffrent colors of paint
there was a nasty imperfection on the driver side of the bumper ,it was super high

all smooth

allmost ready for primer

first coat of primer to see how close i am


all so prepped the doors ,the bottom half of the doors had the plastic molding ,im replaceing it with 22 gauge or 20 guage steel im allso doint he same for the one peice of the skirt that comes up and is inline with the door plastic
NO MORE 22 YEAR old PLASTIC lol well there anyways

and tonight i blocked it down and threw another coat on it
allso test fitted the fog lights ,i need alot out here in the country ,with all the deer and other wild life gots to see where im going and whats coming at me lol


allso removed the hatch and was very happy to see alittle rust by the hinges On these older crxs and civics there is allways rust there