heas swap questions
ok so a friend and myself has decided to do a head swap on his 96 ex 2dr. Just a few questions.
#1 ZC SOHC block... wanting to install a d15b head. will this work??? just to double check.
#2 is there a difference in the timing belt? if so what is the correct one to use?
#3 the original head that he has on it in a non v-tec... long story (this is the reason we are wanting to do the head swap). So we have to replace the distributor. the one that i have (that came with the head) is OBD1... is there a conversion harness or do we need a OBD2 distributor.
#4 how hard is it to do a head swap? this will be our first time attempting it.
#1 ZC SOHC block... wanting to install a d15b head. will this work??? just to double check.
#2 is there a difference in the timing belt? if so what is the correct one to use?
#3 the original head that he has on it in a non v-tec... long story (this is the reason we are wanting to do the head swap). So we have to replace the distributor. the one that i have (that came with the head) is OBD1... is there a conversion harness or do we need a OBD2 distributor.
#4 how hard is it to do a head swap? this will be our first time attempting it.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 95jeremie »</TD></TR><TR><TD CLASS="quote">how hard is it to do a head swap? this will be our first time attempting it.</TD></TR></TABLE>theres a write up on this on the top of the forums page.
https://honda-tech.com/zerothread?id=735196
https://honda-tech.com/zerothread?id=735196
Thread
Thread Starter
Forum
Replies
Last Post
as i lay dying
Honda Accord (1990 - 2002)
7
Apr 21, 2004 05:48 PM



