I have an 88rex and i was checking out my assembly and it look like it was welded back together. the pedal leans a bit also. thanks fellow HT'ers

BTW ordered my HT sticker today. can' wait. will be my frist and only sticker on the rex.

EnSAn

 

Exploded parts

 

I have the chilton guide and the 88 workshop guide. I need a PIC to verify. But thanks for the help anyhow.

 

http://www.4gcivic.net/wp/?page_id=6
small one there..

EDIT here try this one..

 

Dosen't help out but i do thank you for the effort. What i realy need is the clutch pedal. if I had my camera i'd just take a pic of mine and then you folks could tell if its been fixed.

 

Here is a shot I took standing on my head..

 

I hear it's common to break the clutch pedal assembly in an EF, common to find welded sets.

Probably what happened to yours. Pick up a set from a scrap yard.

 

man that thangs a bitch to fix. it took me all in all about five hours to fix...taking apart the entire dash was simple but i mean the shop wanted to charge me 500 bux...i bought the part.....all in all it cost....50 bux....i'll try and post up some olf pics...good luck those welds usually break after about a good 16 yrs.

 

Yeah looks like it was re-welded and not very good too. The pedel leans far to the left close to the foot rest. Well looks like junk yard shoping this weekend. CRX are HARD to find in the yards out here. What other models can i use? Thanks

 

Any 5spd 88-91 civic works

 

Good to know that raises my options. Thanks

 

Here is a pic of my assembly so you folks know what i was talking about now.



Picked up a used one from an 90ish rex today at the local junkyard for 6 bux the car is shifting just fine now.