Blown shock? Upper shock mount bushing?
#1
Honda-Tech Member
Thread Starter
Join Date: May 2009
Location: Richmond CA
Posts: 953
Likes: 0
Received 0 Likes
on
0 Posts
Blown shock? Upper shock mount bushing?
okay so i have this clunk in the rear left when going over the tiniest bump but not smooth and aggressive dips.
i thought it was my lower control arm bushings. i went ahead and replaced them and the clunk was still there
so i checked to make sure every suspension component was tightened and not broken.
everything was fine so is put my eyes on my Function and Form coilovers and i swapped sides and the clunk went to the opposite side. now that i pinpointed the noise (not exactly) im wondering if the shock is blown. there is no noticeable reduction in damping maybe because of the high spring rates. so what do you guys think? shocks are still under "warranty" but i have to deal w shipping time etc.
but i also thought about the upper shock mount busings. could that be the culprit?
thanks
i thought it was my lower control arm bushings. i went ahead and replaced them and the clunk was still there
so i checked to make sure every suspension component was tightened and not broken.
everything was fine so is put my eyes on my Function and Form coilovers and i swapped sides and the clunk went to the opposite side. now that i pinpointed the noise (not exactly) im wondering if the shock is blown. there is no noticeable reduction in damping maybe because of the high spring rates. so what do you guys think? shocks are still under "warranty" but i have to deal w shipping time etc.
but i also thought about the upper shock mount busings. could that be the culprit?
thanks
#2
Honda-Tech Member
Join Date: Feb 2008
Location: Toronto, ontario, canada
Posts: 1,791
Likes: 0
Received 0 Likes
on
0 Posts
Re: Blown shock? Upper shock mount bushing?
okay so i have this clunk in the rear left when going over the tiniest bump but not smooth and aggressive dips.
i thought it was my lower control arm bushings. i went ahead and replaced them and the clunk was still there
so i checked to make sure every suspension component was tightened and not broken.
everything was fine so is put my eyes on my Function and Form coilovers and i swapped sides and the clunk went to the opposite side. now that i pinpointed the noise (not exactly) im wondering if the shock is blown. there is no noticeable reduction in damping maybe because of the high spring rates. so what do you guys think? shocks are still under "warranty" but i have to deal w shipping time etc.
but i also thought about the upper shock mount busings. could that be the culprit?
thanks
i thought it was my lower control arm bushings. i went ahead and replaced them and the clunk was still there
so i checked to make sure every suspension component was tightened and not broken.
everything was fine so is put my eyes on my Function and Form coilovers and i swapped sides and the clunk went to the opposite side. now that i pinpointed the noise (not exactly) im wondering if the shock is blown. there is no noticeable reduction in damping maybe because of the high spring rates. so what do you guys think? shocks are still under "warranty" but i have to deal w shipping time etc.
but i also thought about the upper shock mount busings. could that be the culprit?
thanks
#3
Honda-Tech Member
Thread Starter
Join Date: May 2009
Location: Richmond CA
Posts: 953
Likes: 0
Received 0 Likes
on
0 Posts
Re: Blown shock? Upper shock mount bushing?
yes. still there. did you read the part where i switched the coilovers from side to side and the noise went to the other side/
im getting a replacement shock and we'll see if thats it.
im getting a replacement shock and we'll see if thats it.
#5
Honda-Tech Member
Thread Starter
Join Date: May 2009
Location: Richmond CA
Posts: 953
Likes: 0
Received 0 Likes
on
0 Posts
Re: Blown shock? Upper shock mount bushing?
i was also thinking top hat bushings. well ill take the bad one apart once the new shock comes in if the top bushing that sits under the top hat is bad then ill replace that and return the shock. i dont think that could have failed tho because wouldnt they all fail at the same time or close?
also i compressed the spring a little leaving the top hat with no pressure and i was able to compress the shock with my hand and no rebound so thats one thing against the shock, also that side feels bouncy like it dips more than the other. but we'll see. btw the coilovers are preloaded so the spring has no play ever, also the rubber that separates the spring and top hat is a little worn but not cut thru.
also i compressed the spring a little leaving the top hat with no pressure and i was able to compress the shock with my hand and no rebound so thats one thing against the shock, also that side feels bouncy like it dips more than the other. but we'll see. btw the coilovers are preloaded so the spring has no play ever, also the rubber that separates the spring and top hat is a little worn but not cut thru.
Trending Topics
#8
Honda-Tech Member
Re: Blown shock? Upper shock mount bushing?
I'm having this issue with F&F's right now too. Were you able to order one replacement from the company?
#10
Re: Blown shock? Upper shock mount bushing?
haha funny how you're going through the same thing. i got the exact same problem on my shocks. i switched my rear shocks to the opposite side and the noise moved as well so i assume one shocks blown. now i want to test if its the top hats. funny how we live in the same city too lol. so what happened anyways? update on this?
#11
Honda-Tech Member
Thread Starter
Join Date: May 2009
Location: Richmond CA
Posts: 953
Likes: 0
Received 0 Likes
on
0 Posts
Re: Blown shock? Upper shock mount bushing?
WTF old *** bump!
dont you hate it when you have the same exact issues as in a thread someone made and the ******* never updated it? that drives me nuts! well oops lol
SO! i it turned out it was the shock. i switched sides and changed the top mounts and everything until i gave up and called F&F. i had to send a 100 deposit and they sent me a new shock. i sent mine after swapping everything and got my 100 back. NOISE GONE!
well i sold the car in January and got a GTI
dont you hate it when you have the same exact issues as in a thread someone made and the ******* never updated it? that drives me nuts! well oops lol
SO! i it turned out it was the shock. i switched sides and changed the top mounts and everything until i gave up and called F&F. i had to send a 100 deposit and they sent me a new shock. i sent mine after swapping everything and got my 100 back. NOISE GONE!
well i sold the car in January and got a GTI
#13
Honda-Tech Member
Re: Blown shock? Upper shock mount bushing?
WTF old *** bump!
dont you hate it when you have the same exact issues as in a thread someone made and the ******* never updated it? that drives me nuts! well oops lol
SO! i it turned out it was the shock. i switched sides and changed the top mounts and everything until i gave up and called F&F. i had to send a 100 deposit and they sent me a new shock. i sent mine after swapping everything and got my 100 back. NOISE GONE!
well i sold the car in January and got a GTI
dont you hate it when you have the same exact issues as in a thread someone made and the ******* never updated it? that drives me nuts! well oops lol
SO! i it turned out it was the shock. i switched sides and changed the top mounts and everything until i gave up and called F&F. i had to send a 100 deposit and they sent me a new shock. i sent mine after swapping everything and got my 100 back. NOISE GONE!
well i sold the car in January and got a GTI
#14
#15
B*a*n*n*e*d
Join Date: Jun 2008
Location: Seattle, WA, United States
Posts: 753
Likes: 0
Received 0 Likes
on
0 Posts
#16
#17
Honda-Tech Member
Thread Starter
Join Date: May 2009
Location: Richmond CA
Posts: 953
Likes: 0
Received 0 Likes
on
0 Posts
Re: Blown shock? Upper shock mount bushing?
POS for track use? i agree they felt incredibly soft im almost tucking rim here. with no driver in the front the height was almost an inch above the tire
but on the street i always had a smile and my back thanked me lol
but on the street i always had a smile and my back thanked me lol
#18
Honda-Tech Member
Thread Starter
Join Date: May 2009
Location: Richmond CA
Posts: 953
Likes: 0
Received 0 Likes
on
0 Posts
Re: Blown shock? Upper shock mount bushing?
btw AMR are you guys ever gonna venture in the VW world?
all quality coilovers i see are KW but $$$ lol
if you guys need a guinea pig put me on the list lol
all quality coilovers i see are KW but $$$ lol
if you guys need a guinea pig put me on the list lol
#19
Re: Blown shock? Upper shock mount bushing?
#20
Honda-Tech Member
Re: Blown shock? Upper shock mount bushing?
#21
Re: Blown shock? Upper shock mount bushing?
his 1996 civic DX set up:
*function & form type 1 (1 blown shock)
*blox LCA's
*no sway bar
* D16y7 motor
*SIR lip
this guy is such a loser that he sold his civic because the honda game was too much for him. then he went and bought a golf GTI.
*function & form type 1 (1 blown shock)
*blox LCA's
*no sway bar
* D16y7 motor
*SIR lip
this guy is such a loser that he sold his civic because the honda game was too much for him. then he went and bought a golf GTI.
#22
B*a*n*n*e*d
Join Date: Jun 2008
Location: Seattle, WA, United States
Posts: 753
Likes: 0
Received 0 Likes
on
0 Posts
Re: Blown shock? Upper shock mount bushing?
Our business is from word of mouth, so I'm not surprised you did not know that, nor is everything listed on our site that we have worked on. But we definately have made them for clients, and we've gone as far back as the MK2, and down to the MK6. We've done sets for the Scirocco, Passat, Beetle, Touareg, Lupo..just to name a few
#23
Re: Blown shock? Upper shock mount bushing?
We make VW coilovers, where you been. And even if we didn't we can make them. CUSTOM COILOVERS IS WHAT WE DO!
Our business is from word of mouth, so I'm not surprised you did not know that, nor is everything listed on our site that we have worked on. But we definately have made them for clients, and we've gone as far back as the MK2, and down to the MK6. We've done sets for the Scirocco, Passat, Beetle, Touareg, Lupo..just to name a few
Our business is from word of mouth, so I'm not surprised you did not know that, nor is everything listed on our site that we have worked on. But we definately have made them for clients, and we've gone as far back as the MK2, and down to the MK6. We've done sets for the Scirocco, Passat, Beetle, Touareg, Lupo..just to name a few
#24
Honda-Tech Member
Thread Starter
Join Date: May 2009
Location: Richmond CA
Posts: 953
Likes: 0
Received 0 Likes
on
0 Posts
Re: Blown shock? Upper shock mount bushing?
and this
the most important and basic mods other than a good susp
there's d16y7 guys whooping dohc motors at the track with a good driver.
and i had a gsr rear swaybar with custom mounts
and that was after the shock lol
the car was too old and too much of a hassle to drive. gotta watch where you park, interior is ugly as ****, noisy (no insulation) etc...i woulda kept itif i had cash to keep it and buy a daily.
my gti is more ballsy and wayyy more comfy and looks better imo
edit: buddy just beat his PB http://www.youtube.com/watch?v=WSV54...ature=youtu.be
ls/b16 tranny I/H/E/C
skunk 2 same taiwan type coils lol
great tires and driver>bling coils shitty driver and china tires
Last edited by wannaBjdmca6; 10-24-2012 at 10:32 AM.
#25
Honda-Tech Member
Thread Starter
Join Date: May 2009
Location: Richmond CA
Posts: 953
Likes: 0
Received 0 Likes
on
0 Posts
Re: Blown shock? Upper shock mount bushing?