Honda-Tech - Honda Forum Discussion
Another view
Another view
0 2021/12/14 19:00:59
Replaced some of the regular bolts on the turbo (compressor side) with stainless bolts/washers.
Replaced some of the regular bolts on the turbo (compressor side) with stainless bolts/washers.
0 2021/12/14 19:00:54
0 2021/12/06 21:49:39
0 2021/12/06 21:49:30
0 2021/12/06 21:49:21
0 2021/12/06 21:49:12
Muffler is literally resting on the sway bar bracket
Muffler is literally resting on the sway bar bracket
0 2021/11/27 18:07:37
Had my 9 yo daughter helping to install the bushings into the control arms.
Had my 9 yo daughter helping to install the bushings into the control arms.
0 2021/11/27 18:07:31
Showing 3” exhaust to swaybar end link clearance…it’s tight for sure, not sure if it hits there yet, but the muffler is definitely hitting.
Showing 3” exhaust to swaybar end link clearance…it’s tight for sure, not sure if it hits there yet, but the muffler is definitely hitting.
0 2021/11/27 18:07:26
Zero clearance between muffler and passenger sway bar bracket, need to take car to exhaust shop to have muffler moved over about 1”.
Zero clearance between muffler and passenger sway bar bracket, need to take car to exhaust shop to have muffler moved over about 1”.
0 2021/11/27 18:07:19
The Greddy 3” exhaust hangs too low, it should be 1-2” higher than it comes. Either a design or manufacturing flaw.
The Greddy 3” exhaust hangs too low, it should be 1-2” higher than it comes. Either a design or manufacturing flaw.
0 2021/11/27 18:07:14
ASRs instructions aren’t the best, there is no mention of where the 2 nuts go they supply. The ly go on the backside of the mount and connect to the sway bar bracket’s top bolts.
ASRs instructions aren’t the best, there is no mention of where the 2 nuts go they supply. The ly go on the backside of the mount and connect to the sway bar bracket’s top bolts.
0 2021/11/27 18:07:09
When reinstalling the control arms, make sure to keep an eye on the bushings, they like to pop out.
When reinstalling the control arms, make sure to keep an eye on the bushings, they like to pop out.
0 2021/11/27 18:07:02
You can kind of see the muffler up against the passenger side sway bar bracket.
You can kind of see the muffler up against the passenger side sway bar bracket.
0 2021/11/27 18:06:56
Completed install of brand new ASR brace, 24mm sway bar, end links, and lower control arms with poly bushings.
Completed install of brand new ASR brace, 24mm sway bar, end links, and lower control arms with poly bushings.
0 2021/11/27 18:06:51
At alignment shop
At alignment shop
0 2021/11/27 18:06:45
Alignment on 11/27/21
Alignment on 11/27/21
0 2021/11/27 18:06:36
0 2021/11/27 17:54:35
0 2021/11/27 17:54:29
0 2021/11/27 17:54:25
0 2021/11/27 17:54:20
Freddy 3” exhaust
Freddy 3” exhaust
0 2021/11/27 17:54:14
0 2021/11/27 17:47:51
There is no note around installing the 2 provided nuts, they should be installed on the backside of the brace you install, and inside the subframe. I believe it attaches to the top sway bar bracket bolt.
There is no note around installing the 2 provided nuts, they should be installed on the backside of the brace you install, and inside the subframe. I believe it attaches to the top sway bar bracket bolt.
0 2021/11/27 17:47:46
0 2021/11/27 17:47:39
Close up of driver side completed - brand new ASR brace, 24mm sway bar, end links, and rear control arms.
Close up of driver side completed - brand new ASR brace, 24mm sway bar, end links, and rear control arms.
0 2021/11/27 17:47:33
Getting an alignment on 11/27/21. All checked out ok when they were done, and my steering wheel went from being way off to the left to being perfectly straight again. The alignment was so far off due to taking apart the front suspension and replacing the steering rack since it was leaking.
Getting an alignment on 11/27/21. All checked out ok when they were done, and my steering wheel went from being way off to the left to being perfectly straight again. The alignment was so far off due to taking apart the front suspension and replacing the steering rack since it was leaking.
0 2021/11/27 17:47:23
0 2021/11/01 07:45:00
0 2021/11/01 07:44:54
0 2021/11/01 07:44:47
0 2021/10/14 23:47:50
I need these 2 oem hoses
I need these 2 oem hoses
0 2021/10/14 23:47:43
0 2021/10/02 08:13:26
0 2021/09/23 15:10:02
I’m looking for the bar on the bottom.
I’m looking for the bar on the bottom.
0 2021/09/22 12:54:56
0 2021/09/14 23:11:21
0 2021/09/14 23:11:17
0 2021/09/14 23:11:12
0 2021/09/13 11:18:30
0 2021/09/13 11:18:25