Honda-Tech - Honda Forum Discussion
0 2017/10/09 10:47:57
Intercooler bolted in and now working on pieces to funnel the air into the veins.
Intercooler bolted in and now working on pieces to funnel the air into the veins.
0 2017/09/25 15:54:38
The tube going from one shock hoop to the others is removable with 4 bolts. More support for the shocks.
The tube going from one shock hoop to the others is removable with 4 bolts. More support for the shocks.
0 2017/09/25 15:54:33
Shot from the driver side.
Shot from the driver side.
0 2017/09/25 15:54:27
Rear suspension almost done. Still have to make the driver pushrod.
Rear suspension almost done. Still have to make the driver pushrod.
0 2017/09/25 15:54:21
Setting the intercooler in to check measurements. Had to cut a different cross bar in the end.
Setting the intercooler in to check measurements. Had to cut a different cross bar in the end.
0 2017/09/25 15:54:15
Picture from the back.
Picture from the back.
0 2017/09/25 15:54:09
The hoops are the same size. The lighting and the wood hoist system makes it look wrong.
The hoops are the same size. The lighting and the wood hoist system makes it look wrong.
0 2017/09/25 15:53:58
Checking the measurement from rear firewall to cylinder head.
Checking the measurement from rear firewall to cylinder head.
0 2017/09/25 15:53:52
INTERCOOLER need I say more.
INTERCOOLER need I say more.
0 2017/09/25 15:53:46
Making the matching tubes for the left side and a tube for extra support.
Making the matching tubes for the left side and a tube for extra support.
0 2017/09/25 15:47:25
Here's a good shot from the front.
Here's a good shot from the front.
0 2017/09/25 15:47:20
Right rear shock hoop mostly done and you can see the passenger rollover hoop.
Right rear shock hoop mostly done and you can see the passenger rollover hoop.
0 2017/09/25 15:47:15
Making the right rear shock mounting hoop. The pushrod was also mocked up.
Making the right rear shock mounting hoop. The pushrod was also mocked up.
0 2017/09/25 15:47:09
Rear passenger shock pivot mount tacked in.
Rear passenger shock pivot mount tacked in.
0 2017/09/25 15:47:03
0 2017/09/25 15:43:52
A steering rack that turns left when I turn left. I still have room for the electric fan to mount to the radiator. The steering rack is new and original for a 71-73 Mustang.
A steering rack that turns left when I turn left. I still have room for the electric fan to mount to the radiator. The steering rack is new and original for a 71-73 Mustang.
0 2017/09/25 15:27:51
Radiator installed and you can get a better idea of what the front suspension looks like.
Radiator installed and you can get a better idea of what the front suspension looks like.
0 2017/09/25 15:27:44
Here's the center mount all welded up. May have to add some pieces to keep any water staying in that area.
Here's the center mount all welded up. May have to add some pieces to keep any water staying in that area.
0 2017/09/25 15:27:37
Both pushrods in but no center mount done yet.
Both pushrods in but no center mount done yet.
0 2017/09/25 15:27:31
First pushrod linkage design. I made a change to it farther down.
First pushrod linkage design. I made a change to it farther down.
0 2017/09/25 15:27:24
Front passenger shock linkage pivot point tacked in.
Front passenger shock linkage pivot point tacked in.
0 2017/09/25 15:27:18
Driver side main tube matches the passenger side. No clue why I took the picture parallel with tube and not the ground.
Driver side main tube matches the passenger side. No clue why I took the picture parallel with tube and not the ground.
0 2017/09/25 15:27:12
Passenger front main tube angle.
Passenger front main tube angle.
0 2017/09/25 15:27:07
Setting in the frame but not mounted up yet. Going to have to make some modifications to the tank for it go around some tubes.
Setting in the frame but not mounted up yet. Going to have to make some modifications to the tank for it go around some tubes.
0 2017/09/25 15:20:34
All welded up and ready for testing. Sealed the tank ports off and did a air pressure and water test. Had to fix a few pin holes.
All welded up and ready for testing. Sealed the tank ports off and did a air pressure and water test. Had to fix a few pin holes.
0 2017/09/25 15:20:28
Good shot of the baffles and the lower left sump area.
Good shot of the baffles and the lower left sump area.
0 2017/09/25 15:20:23
Making the gas tank from scratch. The fuel pump is going to be an inline high psi - high flow.
Making the gas tank from scratch. The fuel pump is going to be an inline high psi - high flow.
0 2017/09/25 15:20:17
This is the first steering rack I was going to use. After getting the rack installed and all connected, uh. I used a rack off a car that original mounts the backside of the tires. Well when you connected it to the first side. Turn the wheel left and you go right. Really good security system but no such thing as GP steering.
This is the first steering rack I was going to use. After getting the rack installed and all connected, uh. I used a rack off a car that original mounts the backside of the tires. Well when you connected it to the first side. Turn the wheel left and you go right. Really good security system but no such thing as GP steering.
0 2017/09/25 15:15:04
Here's the front control arms all bolted up. Working on getting the ride level just right.
Here's the front control arms all bolted up. Working on getting the ride level just right.
0 2017/09/25 15:14:57
0 2017/06/07 09:24:53
0 2017/06/03 10:47:46
0 2017/06/03 10:39:05
0 2017/06/03 10:35:37
0 2017/06/03 10:33:47
0 2017/06/03 10:33:45
0 2017/06/03 10:15:16
This is the new chromoly johnny joint. I'll be using different high misalignment spacers not in the picture. It's the same width as the original joint bushing joint with the spacers. I'll now have camber and toe adjustments on all the wheels.
This is the new chromoly johnny joint. I'll be using different high misalignment spacers not in the picture. It's the same width as the original joint bushing joint with the spacers. I'll now have camber and toe adjustments on all the wheels.
0 2017/06/03 09:37:07
Imagine a bushing and spacer in the joint. This was the original planned camber adjustable joint. Since then has been changed out.
Imagine a bushing and spacer in the joint. This was the original planned camber adjustable joint. Since then has been changed out.
0 2017/06/03 09:33:02
0 2017/04/24 16:53:32