Honda-Tech - Honda Forum Discussion
0 2016/02/12 14:20:47
After: 5 lug
After: 5 lug
0 2016/02/12 14:20:44
Machined and drilled to 4x100
Machined and drilled to 4x100
0 2016/02/12 14:20:39
Outer ridge shaved down to fit the hat
Outer ridge shaved down to fit the hat
0 2016/02/12 14:20:37
Center taken down to fit the hat
Center taken down to fit the hat
0 2016/02/12 14:20:34
0 2016/02/12 14:20:31
Welded up
Welded up
0 2016/02/12 14:20:28
Before: 4 lug
Before: 4 lug
0 2016/02/12 14:20:25
MFactory H22A Helical Limited Slip Differential
MFactory H22A Helical Limited Slip Differential
0 2016/02/10 17:12:22
I can see right through you.
I can see right through you.
0 2016/02/10 17:12:18
So purddy!
So purddy!
0 2016/02/10 17:12:15
Rebuild! You know, the necessary accoutrements...
Rebuild! You know, the necessary accoutrements...
0 2016/02/10 17:00:35
0 2016/02/09 14:45:46
0 2016/02/09 14:45:43
0 2016/02/09 14:45:39
0 2016/02/09 14:45:36
0 2016/02/09 14:45:32
0 2016/02/04 10:05:01
0 2016/02/04 10:02:30
Starter towards the front of the housing.
Starter towards the front of the housing.
0 2016/02/03 16:28:49
Transfer case where shift linkage entered and mounted on a B16 manual trans. You can also see where the intermediate shaft goes.
Transfer case where shift linkage entered and mounted on a B16 manual trans. You can also see where the intermediate shaft goes.
0 2016/02/03 16:28:46
Transfer case. Gears are driven off a ring gear on the open diff. Hopefully this little guy can handle some power.
Transfer case. Gears are driven off a ring gear on the open diff. Hopefully this little guy can handle some power.
0 2016/02/03 16:28:43
Cables and shift mechanism.
Cables and shift mechanism.
0 2016/02/03 16:28:41
Front side of hat.
Front side of hat.
0 2016/01/30 08:32:21
Center section is also too big for the hat.
Center section is also too big for the hat.
0 2016/01/30 08:31:37
Hub is too big to fit into the backside of the rotor hat.
Hub is too big to fit into the backside of the rotor hat.
0 2016/01/30 08:30:51
No more holes.
No more holes.
0 2016/01/30 08:27:05
Back side of hub. Studs removed.
Back side of hub. Studs removed.
0 2016/01/30 08:25:33
5 lug rear CR-V hub.
5 lug rear CR-V hub.
0 2016/01/30 08:24:13
I have no legs, I have no legs!
I have no legs, I have no legs!
0 2016/01/27 16:33:48
I have no legs, I have no legs.
I have no legs, I have no legs.
0 2016/01/27 16:29:10
Another shot
Another shot
0 2016/01/27 16:23:33
Backsides
Backsides
0 2016/01/27 16:23:05
Naked!
Naked!
0 2016/01/27 16:22:26
With wheel bearing assemblies on...
With wheel bearing assemblies on...
0 2016/01/27 16:21:52
I'm sure you can guess which is which.
I'm sure you can guess which is which.
0 2016/01/27 16:21:02
Front side of trailing arm where wheel bearing sits. Looks like there is a bicycle in there...
Front side of trailing arm where wheel bearing sits. Looks like there is a bicycle in there...
0 2016/01/27 16:12:37
Rear CR-V trailing arm with wheel bearing carrier
Rear CR-V trailing arm with wheel bearing carrier
0 2016/01/27 16:11:24
CR-V rear trailing arm, drum brakes
CR-V rear trailing arm, drum brakes
0 2016/01/27 16:05:14
0 2016/01/26 10:44:59