Honda-Tech - Honda Forum Discussion
0 2016/10/08 11:40:12
0 2016/10/08 11:40:10
0 2016/10/08 11:39:15
0 2016/10/08 11:39:12
0 2016/10/04 17:38:23
Looks a lot shorter
Looks a lot shorter
0 2016/10/04 17:38:21
Think they misspelled Darry and forgot the Car
Think they misspelled Darry and forgot the Car
0 2016/10/04 17:38:19
Uhhhhhhh....
Uhhhhhhh....
0 2016/10/04 17:38:15
0 2016/10/01 12:35:22
Just sprayed them with underbody coating
Just sprayed them with underbody coating
0 2016/10/01 12:35:20
The sandwich plates
The sandwich plates
0 2016/10/01 12:35:18
Center bearing is just under the E-brake handle
Center bearing is just under the E-brake handle
0 2016/10/01 12:35:14
Top of the sandwich in the cab
Top of the sandwich in the cab
0 2016/10/01 12:33:25
Just under 38" from center bearing to flange
Just under 38" from center bearing to flange
0 2016/10/01 12:33:19
0 2016/10/01 12:33:17
About 6" that need to come off
About 6" that need to come off
0 2016/10/01 12:33:15
0 2016/10/01 12:33:12
0 2016/10/01 12:33:10
Center bearing mounted!!
Center bearing mounted!!
0 2016/10/01 12:29:51
0 2016/10/01 12:29:48
Still had to tweak the tabs once they were welded in
Still had to tweak the tabs once they were welded in
0 2016/10/01 12:29:44
Sandwich plate with tab welded on
Sandwich plate with tab welded on
0 2016/10/01 12:29:42
0 2016/10/01 12:29:39
Tab welded to the plate, plate welded to the frame
Tab welded to the plate, plate welded to the frame
0 2016/10/01 12:29:37
Last bit of moving around before it is permanent
Last bit of moving around before it is permanent
0 2016/10/01 12:29:35
Poked holes, bolts just the right length
Poked holes, bolts just the right length
0 2016/10/01 12:26:01
0 2016/10/01 12:25:56
0 2016/10/01 12:25:51
Took a bit of tweaking to get right
Took a bit of tweaking to get right
0 2016/10/01 12:25:47
Top tab for top of tunnel, bottom tab for the frame
Top tab for top of tunnel, bottom tab for the frame
0 2016/10/01 12:25:44
Plate welded to the frame to disperse any torque energy
Plate welded to the frame to disperse any torque energy
0 2016/10/01 12:25:41
Tried to get as close to one side as possible to give room for the exhaust
Tried to get as close to one side as possible to give room for the exhaust
0 2016/10/01 12:25:38
0 2016/10/01 12:11:36
Underbody coat
Underbody coat
0 2016/10/01 12:11:33
2-piece sandwich
2-piece sandwich
0 2016/10/01 12:11:31
Sits just under the E-brake handle
Sits just under the E-brake handle
0 2016/10/01 12:11:26
Top of the plate in the cab.
Top of the plate in the cab.
0 2016/10/01 12:11:22
0 2016/10/01 12:11:19
0 2016/10/01 12:11:14
About 6". It measures just under 38" from center bearing mount to flange.
About 6". It measures just under 38" from center bearing mount to flange.
0 2016/10/01 12:11:10