Honda-Tech - Honda Forum Discussion
0 2016/11/13 20:32:58
0 2016/11/13 20:32:54
0 2016/11/13 20:32:50
0 2016/11/13 20:32:46
0 2016/11/13 20:32:44
0 2016/11/13 20:32:40
0 2016/11/13 20:32:37
0 2016/11/13 20:32:34
0 2016/11/13 20:32:31
0 2016/11/13 20:32:29
0 2016/11/13 20:32:26
0 2016/11/13 20:32:22
0 2016/11/13 20:32:18
0 2016/11/13 20:32:15
0 2016/11/13 20:32:08
0 2016/10/14 20:07:57
1 hot and 1 not. Hey 50/50 odds are still great in vegas.
1 hot and 1 not. Hey 50/50 odds are still great in vegas.
0 2015/12/12 13:30:19
No tuck, no poke, just fitted.
No tuck, no poke, just fitted.
0 2015/12/12 13:28:51
With a set of Eibachs installed. Thanks to Kelley Performance for use of the lift and wall mounted spring compressor.
With a set of Eibachs installed. Thanks to Kelley Performance for use of the lift and wall mounted spring compressor.
0 2015/12/12 13:26:28
After tint and wheels. Still why do they put the front way up in the air??
After tint and wheels. Still why do they put the front way up in the air??
0 2015/12/12 13:25:43
1st day i got it. Bad pinstripes, and 4x4 status.not to mention the ugly 17" wheels. Only 11k miles on the clock.
1st day i got it. Bad pinstripes, and 4x4 status.not to mention the ugly 17" wheels. Only 11k miles on the clock.
0 2015/12/12 13:24:31
After a wash and wax with the rain approaching.
After a wash and wax with the rain approaching.
0 2015/12/12 13:23:44
0 2014/01/17 13:29:21
9/7/13
9/7/13
0 2013/09/07 16:15:00
Just a random current shot
Just a random current shot
0 2013/08/28 05:22:41
0 2013/06/16 21:41:30
0 2013/06/16 21:41:30
0 2013/06/16 21:41:30
0 2013/06/15 03:24:42
0 2013/06/15 03:24:42
0 2013/06/15 03:24:42
0 2013/06/12 12:21:22
Progress so far
Progress so far
0 2013/06/12 12:21:22
Still in the process of cleaning up the bay
Still in the process of cleaning up the bay
0 2013/05/07 16:26:33
0 2013/05/07 16:26:33
New Avid Mounts
New Avid Mounts
0 2013/05/07 16:26:33
Modded S2 Cam gear I used grade 5 bolts that were longer (cant remember the exact size) threaded thru backside and used red loctite. Then washers and lock nuts.
Modded S2 Cam gear I used grade 5 bolts that were longer (cant remember the exact size) threaded thru backside and used red loctite. Then washers and lock nuts.
1 2013/05/07 16:26:33
New Exedy clutch installed
New Exedy clutch installed
0 2013/04/26 22:43:50
Flywheel and new pilot in
Flywheel and new pilot in
0 2013/04/26 22:43:50
Trans gettin some fresh paint along with the new sync/sleeve install
Trans gettin some fresh paint along with the new sync/sleeve install
0 2013/04/26 22:43:50