Honda-Tech - Honda Forum Discussion
0 2025/12/13 12:39:07
Have both door trims and drivers lower fender piece but gotta fine the passenger side lower fender piece.
Have both door trims and drivers lower fender piece but gotta fine the passenger side lower fender piece.
0 2025/12/12 19:44:16
0 2025/12/12 19:43:58
0 2025/12/12 19:43:37
0 2025/12/12 19:43:09
Speed factory race radiator. Have both an ends thermostat and water neck for the ls motor also.
Speed factory race radiator. Have both an ends thermostat and water neck for the ls motor also.
0 2025/12/12 19:42:29
0 2025/12/12 19:41:18
0 2025/12/12 19:40:32
Pic I got before I saw it. “Just missing front mount”
Pic I got before I saw it. “Just missing front mount”
0 2025/12/12 19:39:53
S1 trailing arms. No rear brakes on it. Kid said he was going “full race”
S1 trailing arms. No rear brakes on it. Kid said he was going “full race”
0 2025/12/12 19:37:41
These look tight
These look tight
0 2025/12/12 19:36:51
I guess you only need one bolt here? Looks good to me.
I guess you only need one bolt here? Looks good to me.
0 2025/12/12 19:35:21
Some race bar thing to replace the core support.
Some race bar thing to replace the core support.
0 2025/12/12 19:33:22
Everything in the bay is loose. Every bolt, makes taking it apart allot easier lol.
Everything in the bay is loose. Every bolt, makes taking it apart allot easier lol.
0 2025/12/12 19:32:18
Speed factory fuel cell. Front core support is hacked up.
Speed factory fuel cell. Front core support is hacked up.
0 2025/12/12 19:31:09
Fresh off the dolley. One traction bar bolt was MIA.
Fresh off the dolley. One traction bar bolt was MIA.
0 2025/12/12 19:29:58
0 2025/12/09 10:49:42
0 2025/12/09 10:49:33
0 2025/12/09 10:49:21
0 2025/12/04 18:57:36
0 2025/12/04 18:57:26
0 2025/11/29 00:28:08
0 2025/11/29 00:28:05
0 2025/11/29 00:26:20
0 2025/11/29 00:26:11
0 2025/11/28 23:58:17
0 2025/11/28 23:57:26
0 2025/11/28 23:56:42
0 2025/11/28 23:55:53
0 2025/11/28 23:55:03
0 2025/11/28 23:49:11
0 2025/11/28 23:48:20
0 2025/11/28 23:47:41
0 2025/11/28 22:30:51
0 2025/11/28 21:52:44
This is after hand sanding the port. About 90% of the way done but it feels like a much smoother air path then when it was opened up with the 80grit flap wheels.
This is after hand sanding the port. About 90% of the way done but it feels like a much smoother air path then when it was opened up with the 80grit flap wheels.
0 2025/11/28 21:52:39
This pic is just the start of hand sanding the ports. It really exposes the flaws once you move to flat sand paper and a single finger lol.
This pic is just the start of hand sanding the ports. It really exposes the flaws once you move to flat sand paper and a single finger lol.
0 2025/11/28 21:52:35
0 2025/11/28 21:52:31
0 2025/11/28 20:55:06
0 2025/11/28 20:55:00