Honda-Tech - Honda Forum Discussion
What i got. ???
What i got. ???
0 2020/01/30 09:12:06
This crossover pipe has a hole tapped for my coolant sender and has a thermostat housing with a port for a fan switch. It will fit much nicer than the excellent adapter i have on there now. This piece also has a water neck welded on and the ports for the little hoses for the throttle body are welded up.
This crossover pipe has a hole tapped for my coolant sender and has a thermostat housing with a port for a fan switch. It will fit much nicer than the excellent adapter i have on there now. This piece also has a water neck welded on and the ports for the little hoses for the throttle body are welded up.
0 2020/01/30 13:49:06
AC sub-harness from a 2000 Civic LX. No broken plugs, but some wiring has been messed with going to the AC thermostat. $30 plus shipping.
AC sub-harness from a 2000 Civic LX. No broken plugs, but some wiring has been messed with going to the AC thermostat. $30 plus shipping.
0 2020/01/31 08:59:21
Dsg-v25 shrink tubing. Cant remember if it was spAdam who recommended this stuff, but it's so good! Its elastomeric.
Dsg-v25 shrink tubing. Cant remember if it was spAdam who recommended this stuff, but it's so good! Its elastomeric.
0 2020/02/06 14:46:05
Label kit...
Label kit...
0 2020/02/06 14:46:44
Purdy colors!
Purdy colors!
0 2020/02/06 14:47:07
0 2020/02/06 14:47:28
0 2020/02/07 16:27:07
0 2020/02/07 20:13:00
0 2020/02/11 10:10:41
0 2020/02/14 07:28:38
0 2020/02/14 07:29:31
0 2020/02/14 07:36:05
0 2020/02/14 07:38:13
0 2020/02/17 15:28:16
See that black patch on the transmission? The engine had a rear seal leaking when i got it, and thats from then. No more leaks after 2.5 years.
See that black patch on the transmission? The engine had a rear seal leaking when i got it, and thats from then. No more leaks after 2.5 years.
0 2020/02/18 21:27:53
Just tons of clearance! Its amazing how well these engines fit in these bays. Hasport just did the best job.
Just tons of clearance! Its amazing how well these engines fit in these bays. Hasport just did the best job.
0 2020/02/18 21:28:13
Both the bracket on the spring part and the bracket where the cable locates on the caliper had to be reused.
Both the bracket on the spring part and the bracket where the cable locates on the caliper had to be reused.
0 2020/02/18 21:32:39
0 2020/02/20 16:45:13
0 2020/02/20 16:46:14
0 2020/02/22 11:25:48
0 2020/02/24 16:06:55
0 2020/02/24 16:07:40
0 2020/02/24 16:08:06
0 2020/02/24 16:08:28
0 2020/02/24 16:12:13
Cant believe it came out without needing to remove that lower suframe brace!
Cant believe it came out without needing to remove that lower suframe brace!
0 2020/02/24 16:12:47
0 2020/02/24 16:18:01
0 2020/02/24 16:44:09
0 2020/02/24 16:45:29
0 2020/02/24 17:58:30
Drilled a 9/32 pilot hole
Drilled a 9/32 pilot hole
0 2020/02/24 18:00:04
I decided to use the plug with the longer magnet.
I decided to use the plug with the longer magnet.
0 2020/02/24 20:46:39
Notice the stud...
Notice the stud...
0 2020/02/24 20:47:01
Plug is in!
Plug is in!
0 2020/02/24 20:47:19
0 2020/02/24 20:47:44
0 2020/02/25 05:55:32
Ktuned shiftet plate! Now I will be able to have cup holders again!
Ktuned shiftet plate! Now I will be able to have cup holders again!
0 2020/02/25 20:54:18
0 2020/02/25 20:54:44
0 2020/02/29 14:11:44