Honda-Tech - Honda Forum Discussion
0 2017/04/24 20:27:11
0 2017/04/24 20:27:46
0 2017/04/24 20:28:30
0 2017/04/24 20:28:43
Me attempting to start the car, not realizing it has no compression, yah I messed up -.-
Me attempting to start the car, not realizing it has no compression, yah I messed up -.-
0 2017/06/03 16:21:11
0 2017/06/03 16:22:20
0 2017/06/03 16:22:33
Me attempting to get the car ready in spring, it just stopped running last fall. Yes I messed up bad starting up a blown motor.
Me attempting to get the car ready in spring, it just stopped running last fall. Yes I messed up bad starting up a blown motor.
0 2017/06/03 16:26:31
Disassembling the engine bay, head off currently.
Disassembling the engine bay, head off currently.
0 2017/06/03 16:27:39
Getting ready to drop the engine out of the buttom, my crane is currently stuck behind the car anyways :p.
Getting ready to drop the engine out of the buttom, my crane is currently stuck behind the car anyways :p.
0 2017/06/03 16:28:49
Finally the engine was out after afew hours
Finally the engine was out after afew hours
0 2017/06/03 16:37:22
Finally got the car over the engine!
Finally got the car over the engine!
0 2017/06/03 16:40:51
The horrible looking engine bay, wanted too paint it.. Then decided not many people in my area have a full out shaved and tucked bay.. Let's do it!
The horrible looking engine bay, wanted too paint it.. Then decided not many people in my area have a full out shaved and tucked bay.. Let's do it!
0 2017/06/03 16:41:34
Afew races last season Best was 14.1 in the 1320! Looked like my strut towers wanted too collapse.
Afew races last season Best was 14.1 in the 1320! Looked like my strut towers wanted too collapse.
0 2017/06/03 16:42:48
Ohh! Here's a picture of my 5674km old destroyed block. Took out the head with it.
Ohh! Here's a picture of my 5674km old destroyed block. Took out the head with it.
0 2017/06/03 16:45:48
Oh! Here's a picture of the destroyed e Block
Oh! Here's a picture of the destroyed e Block
0 2017/06/03 16:48:01
Started disassembling the dash so I can weld against the firewall, then I decided half of its staying out now anyways
Started disassembling the dash so I can weld against the firewall, then I decided half of its staying out now anyways
0 2017/06/03 16:50:43
Engine bay showing some progress.. Then I noticed the rust on the fender rail, going into the firewall.
Engine bay showing some progress.. Then I noticed the rust on the fender rail, going into the firewall.
0 2017/06/03 16:51:52
Up - close picture of the rust I was just mentioning
Up - close picture of the rust I was just mentioning
0 2017/06/03 16:53:05
Dash out and car completley apart
Dash out and car completley apart
0 2017/06/04 14:42:56
Cut apart and fixing the side rail
Cut apart and fixing the side rail
0 2017/06/04 14:43:36
The rusted floor pan :/
The rusted floor pan :/
0 2017/06/04 14:44:46
Starting to weld up all the holes in the engine bay, alot of grinding too do!
Starting to weld up all the holes in the engine bay, alot of grinding too do!
0 2017/06/05 19:09:15
Strut towers looking alot better!
Strut towers looking alot better!
0 2017/06/05 19:10:27
Hood latch and some firewall progress
Hood latch and some firewall progress
0 2017/06/26 19:51:58
Firewall welded up!
Firewall welded up!
0 2017/06/26 19:52:45
The custom engine mount bracket
The custom engine mount bracket
0 2017/06/26 19:53:12
Epoxy finished
Epoxy finished
0 2017/07/20 22:23:39
0 2017/07/20 22:24:14
Epoxy finished Getting ready for filler and finishing touchs
Epoxy finished Getting ready for filler and finishing touchs
0 2017/07/20 22:26:23
0 2017/07/20 22:27:09
Epoxy primered Getting ready to filler
Epoxy primered Getting ready to filler
0 2017/07/20 22:54:24
Bed linered 1 by 1 square tubing for reinforcement Bondo in the bay The tubing will be shaped like a fender brace I'll show completion soon
Bed linered 1 by 1 square tubing for reinforcement Bondo in the bay The tubing will be shaped like a fender brace I'll show completion soon
0 2017/07/20 22:55:10
Bed lined Got the full fender brace welded on Both sides of the car shall not flex anymore More protection in a accident now too.
Bed lined Got the full fender brace welded on Both sides of the car shall not flex anymore More protection in a accident now too.
0 2017/07/21 18:12:33
Without bumper on drag radials.
Without bumper on drag radials.
0 2017/07/25 21:46:30
These rims didn't last long, just showing paint and exterior quality.
These rims didn't last long, just showing paint and exterior quality.
0 2017/07/25 21:48:16
This was it afew days ago, welded a new rad support bar on. The bay seems smooth but it'll be done in afew days, The back corners were re welded as they were rotten. Was very hard to grind the welds so some filler has helped out. I'll hide the areas with catch cans eventually
This was it afew days ago, welded a new rad support bar on. The bay seems smooth but it'll be done in afew days, The back corners were re welded as they were rotten. Was very hard to grind the welds so some filler has helped out. I'll hide the areas with catch cans eventually
0 2017/08/08 20:14:49
0 2017/09/19 09:59:08
01 impreza
01 impreza
0 2017/09/19 10:03:05
The ej207
The ej207
0 2017/09/19 10:03:31