Honda-Tech - Honda Forum Discussion
Best picture i have at the moment. I have atleast an inch before it touches the block.
Best picture i have at the moment. I have atleast an inch before it touches the block.
0 2016/09/13 14:50:47
How does this look for an intake? Just threw together old intake parts I have left over from old short ram. I'm going to take the car back to the Dyno for more boost.
How does this look for an intake? Just threw together old intake parts I have left over from old short ram. I'm going to take the car back to the Dyno for more boost.
0 2016/09/23 13:11:39
Close up of the log manifold.
Close up of the log manifold.
0 2016/09/23 13:11:41
0 2016/10/18 12:47:25
0 2016/10/19 10:57:03
0 2016/10/19 10:59:21
0 2016/10/19 11:03:18
0 2016/10/20 18:23:37
0 2016/10/30 12:59:53
0 2016/10/30 14:33:10
So all i need to do is change the soleniod configuration and its good? I dont need to do anything with the 1st and 2nd gear on the table below? Now that i'm typing this it is making more sense just wanna make sure.
So all i need to do is change the soleniod configuration and its good? I dont need to do anything with the 1st and 2nd gear on the table below? Now that i'm typing this it is making more sense just wanna make sure.
0 2017/02/13 16:30:45
0 2017/02/20 19:30:56
This is what i have at the moment. PM me the details on the ferrea AZ.
This is what i have at the moment. PM me the details on the ferrea AZ.
0 2017/02/20 19:32:37
Waiting on my .065 resrtictor and ill be good to go. Although it's a little tight, the water lines were easier than expected to hook up. Waiting on an email back from English and ill be back on the dyno. Going for a race gas tune too.
Waiting on my .065 resrtictor and ill be good to go. Although it's a little tight, the water lines were easier than expected to hook up. Waiting on an email back from English and ill be back on the dyno. Going for a race gas tune too.
0 2017/03/07 08:26:43
Best i can do before work
Best i can do before work
0 2017/03/08 08:27:34
I was able to straighten out the raditor because of the new compressor housing and use old 3in piping and v stack from my old na b20v. New couplers and filter and itll be ready to rock.
I was able to straighten out the raditor because of the new compressor housing and use old 3in piping and v stack from my old na b20v. New couplers and filter and itll be ready to rock.
0 2017/03/09 11:17:21
New parts installed - STC Silver Surfer watercooled Garrett 600hp intercooler 3in compressor intake with blox v-stack Still waiting on my restrictor but once I get it I'm gonna start it up and check for leaks. Next Wednesday its going back on the dyno at English Racing hoping to hit my dyno goal of 450whp and shortly after hit the track for my goal of low 12s (maybe high 11s) on street tires. This should be a good test of wall matched engineered parts vs thrown together parts.
New parts installed - STC Silver Surfer watercooled Garrett 600hp intercooler 3in compressor intake with blox v-stack Still waiting on my restrictor but once I get it I'm gonna start it up and check for leaks. Next Wednesday its going back on the dyno at English Racing hoping to hit my dyno goal of 450whp and shortly after hit the track for my goal of low 12s (maybe high 11s) on street tires. This should be a good test of wall matched engineered parts vs thrown together parts.
0 2017/03/14 20:48:54
0 2017/03/14 20:58:17
Turbos - Turbonetics vs. STC Intercoolers - Garrett (installed) vs. Vibrant
Turbos - Turbonetics vs. STC Intercoolers - Garrett (installed) vs. Vibrant
0 2017/03/14 20:58:51
0 2017/03/23 19:03:27
0 2017/03/23 19:04:21
0 2017/03/25 11:26:59
0 2017/03/27 20:44:10
0 2017/03/27 20:53:19
0 2017/03/27 20:53:40
0 2017/03/27 20:53:53
0 2017/03/27 20:54:05
0 2017/03/27 20:56:50
0 2017/03/27 20:57:02
0 2017/03/27 20:57:10
0 2017/03/27 20:57:14
0 2017/05/09 17:48:45
0 2017/05/22 11:33:44
0 2017/05/22 11:36:04
Only good pass I had. I hit 5th gear too so I'm assuming the rev limit could be raised. This was the only pass I made under full power. I don't know why but close to the top of 4th gear it would cut and lose all power. I didn't have a laptop so I couldn't get any datalogs either. Kinda sucked. What happens when you get a boost? Maybe it was hitting boost?
Only good pass I had. I hit 5th gear too so I'm assuming the rev limit could be raised. This was the only pass I made under full power. I don't know why but close to the top of 4th gear it would cut and lose all power. I didn't have a laptop so I couldn't get any datalogs either. Kinda sucked. What happens when you get a boost? Maybe it was hitting boost?
0 2017/05/29 22:00:22
0 2017/07/14 08:30:17
0 2017/08/07 08:20:51
This is my second fastest slip. Can't find the 13.2 at the moment.
This is my second fastest slip. Can't find the 13.2 at the moment.
0 2017/08/14 12:43:59
0 2017/08/14 13:04:56
0 2017/08/14 13:21:06