Honda-Tech - Honda Forum Discussion
Both extension harnesses so that the engine wire harness only enters the firewall on one side.
Both extension harnesses so that the engine wire harness only enters the firewall on one side.
0 2017/04/18 19:14:31
0 2017/04/12 13:04:28
0 2017/04/12 13:03:57
I only painted the fender about 1/2 way down and faded the paint. I didn't want it to be perfect, I wanted it to look like it wasn't painted.
I only painted the fender about 1/2 way down and faded the paint. I didn't want it to be perfect, I wanted it to look like it wasn't painted.
0 2017/04/12 12:30:32
Looks a little dull but most of that is the light and some wax. Ill take better pics later.
Looks a little dull but most of that is the light and some wax. Ill take better pics later.
0 2017/04/12 12:30:31
Freshly painted fender. Still has some wax residue.
Freshly painted fender. Still has some wax residue.
0 2017/04/12 12:30:29
The bolts holding the grill were originally held on with wire and bobby pins. I used some rivet nuts and 10mm bolts and it looks oem.
The bolts holding the grill were originally held on with wire and bobby pins. I used some rivet nuts and 10mm bolts and it looks oem.
0 2017/04/12 12:30:28
0 2017/04/12 12:30:27
0 2017/04/12 12:30:26
0 2017/04/12 12:30:25
Engine bay looks pretty good after the needed parts and cleaning.
Engine bay looks pretty good after the needed parts and cleaning.
0 2017/04/12 12:30:24
0 2017/04/12 12:30:23
0 2017/04/12 12:30:22
Interior is decent. Nothing exciting.
Interior is decent. Nothing exciting.
0 2017/04/12 12:30:21
Hood came out ..."ok" but there is some striping. From a distance or straight on its ok.
Hood came out ..."ok" but there is some striping. From a distance or straight on its ok.
0 2017/04/12 12:30:19
Passenger fender, I tried to wet sand thru the clear but burned through, this fender needs to come off and be straightened still before painting.
Passenger fender, I tried to wet sand thru the clear but burned through, this fender needs to come off and be straightened still before painting.
0 2017/04/12 12:30:18
Passenger side had some scrapes from the tow yard, I did hit a few spots with paint and have yet to clear. Honestly you cant really see them.
Passenger side had some scrapes from the tow yard, I did hit a few spots with paint and have yet to clear. Honestly you cant really see them.
0 2017/04/12 12:30:17
Broken tab I still need to take the bumper off and sort that out.
Broken tab I still need to take the bumper off and sort that out.
0 2017/04/12 12:30:16
Trunk lid is very clean. Its been wet sanded with 2000, then rubbing compound then waxed., its dirty now but I need to wash the car once I finish with the painting and waxing and such
Trunk lid is very clean. Its been wet sanded with 2000, then rubbing compound then waxed., its dirty now but I need to wash the car once I finish with the painting and waxing and such
0 2017/04/12 12:30:15
Car is Dirty but Driver side is pretty clean, Rear bumper has been wet sanded but not polished or waxed
Car is Dirty but Driver side is pretty clean, Rear bumper has been wet sanded but not polished or waxed
0 2017/04/12 12:30:14
Slave cyl with new line.
Slave cyl with new line.
0 2017/03/14 14:41:23
AP1 clutch cyl and line. There are a few wires that need to be cleaned up still but its getting close
AP1 clutch cyl and line. There are a few wires that need to be cleaned up still but its getting close
0 2017/03/14 14:41:22
0 2017/03/14 14:41:20
injector wires are tucked cleared some additional space above the fuel rail.
injector wires are tucked cleared some additional space above the fuel rail.
0 2017/03/14 14:41:18
0 2017/03/14 14:41:15
Ill put the cover back on the stock header eventually. Unless I can find a 4-2-1 header that I can use the stock downpipe on I may just leave it stock.
Ill put the cover back on the stock header eventually. Unless I can find a 4-2-1 header that I can use the stock downpipe on I may just leave it stock.
0 2017/03/14 14:41:13
Wires are decently tucked
Wires are decently tucked
0 2017/03/14 14:41:10
I still need to add a grommet to the firewall and zip tie the wires together to bundle them.
I still need to add a grommet to the firewall and zip tie the wires together to bundle them.
0 2017/03/14 14:41:08
0 2017/03/14 14:41:06
I'm still missing the ECT plug, I'm not too sure what I was thinking, I may have just wired the coolant temp sensor wire in that location, ill have to track it down.
I'm still missing the ECT plug, I'm not too sure what I was thinking, I may have just wired the coolant temp sensor wire in that location, ill have to track it down.
0 2017/03/14 14:41:04
Almost done with the harness
Almost done with the harness
0 2017/02/20 21:28:08
0 2017/02/15 07:32:50
0 2016/10/05 20:53:24
0 2016/10/05 20:53:23
0 2016/10/05 20:53:23
0 2016/10/05 20:53:22
0 2016/10/05 20:53:22
0 2016/10/05 20:53:21
0 2016/10/05 20:53:20
0 2016/10/05 20:53:20