Honda-Tech - Honda Forum Discussion
Jumoer wire 0.00 ohms
Jumoer wire 0.00 ohms
0 2018/11/11 13:30:10
0 2019/04/12 00:39:42
0 2019/04/12 00:40:55
Wtf ek SiR 6pin 5 wire fuel sender
Wtf ek SiR 6pin 5 wire fuel sender
0 2019/06/20 22:21:26
S2K s/m
S2K s/m
0 2019/06/20 22:42:30
S2k s/m
S2k s/m
0 2019/06/20 22:42:42
S2k s/m
S2k s/m
0 2019/06/20 22:42:58
Ek s/m
Ek s/m
0 2019/06/20 22:43:18
Ek s/m
Ek s/m
0 2019/06/20 22:43:32
Old arm in back new itr arm in front (non abs?)
Old arm in back new itr arm in front (non abs?)
0 2019/07/16 19:26:13
0 2019/12/11 17:43:57
You can see a bit of inner overhang here
You can see a bit of inner overhang here
0 2019/12/11 18:07:31
And more here
And more here
0 2019/12/11 18:08:04
And overhanging a rivet
And overhanging a rivet
0 2019/12/11 18:08:26
Conparison sXs
Conparison sXs
0 2019/12/11 18:08:51
Act..from 2006!?
Act..from 2006!?
0 2019/12/11 18:09:09
Different pressure plate tooth style..why this like this? Like 12 teeth
Different pressure plate tooth style..why this like this? Like 12 teeth
0 2019/12/11 18:09:31
More common pressure plate tooth style, teeth are flat bot curved. More teeth, like 20
More common pressure plate tooth style, teeth are flat bot curved. More teeth, like 20
0 2019/12/11 18:09:51
Surface is wider no overhang
Surface is wider no overhang
0 2019/12/11 18:10:16
Cat stole my box!
Cat stole my box!
0 2019/12/11 18:10:31
Disc on yellow pp with wider surface
Disc on yellow pp with wider surface
0 2019/12/11 18:13:06
0 2019/12/17 21:18:59
0 2019/12/17 21:19:27
0 2019/12/18 13:44:53
0 2019/12/18 13:45:18
0 2019/12/18 13:48:17
0 2019/12/18 13:48:35
0 2019/12/18 13:48:53
0 2019/12/18 13:49:15
0 2019/12/18 13:49:46
small ding in one of the brackets; I don't care but someone building a blingy perfect car might; then again they'd probably find a way better way to do the conversion than this!
small ding in one of the brackets; I don't care but someone building a blingy perfect car might; then again they'd probably find a way better way to do the conversion than this!
0 2019/12/23 19:10:18
Innovate DA Cable to Hydro Mount
Innovate DA Cable to Hydro Mount
0 2019/12/23 19:10:20
Innovative Cable to Hydro Adapter Kit (this is the cable only kit, they also have a kit that uses a master/slave actuated by the cable)
Innovative Cable to Hydro Adapter Kit (this is the cable only kit, they also have a kit that uses a master/slave actuated by the cable)
0 2019/12/23 19:10:21
What goes better with corona than a Corona?
What goes better with corona than a Corona?
0 2020/04/24 23:39:56
3g Prius Waterpump to br used as an intercooler punp. I may also plumb in my oem oil cooler though I wouldn't want to overcool the oil.
3g Prius Waterpump to br used as an intercooler punp. I may also plumb in my oem oil cooler though I wouldn't want to overcool the oil.
0 2020/04/24 23:41:53
Hella Vacuum Pump $10 at jy $250+ online
Hella Vacuum Pump $10 at jy $250+ online
0 2020/04/24 23:44:01
Smaller turbo/manifold, got this one for the teg specific because I figured I would have to go tiny to do it. Will see.
Smaller turbo/manifold, got this one for the teg specific because I figured I would have to go tiny to do it. Will see.
0 2020/04/24 23:45:05
Both turbos. Bigger one is a relatively new ebay t3t4, was on my eg for a bit.
Both turbos. Bigger one is a relatively new ebay t3t4, was on my eg for a bit.
0 2020/04/24 23:46:20
I think a bit of materal transferred from my hondata gasket. Oh well its still plenty good to reuse. Catch can fittings in. Need to get a freeze plug for the breather box hole and wither cap off the top fitting, swap it with a plug or something. The plug from my endyn kit is on my other block, I used a rubber expandable freeze plug grommet thingy on my EG for the breather box which i thought was a good solution but..it wasnt there anymore when I took the catchcan fittings off that block..so..
I think a bit of materal transferred from my hondata gasket. Oh well its still plenty good to reuse. Catch can fittings in. Need to get a freeze plug for the breather box hole and wither cap off the top fitting, swap it with a plug or something. The plug from my endyn kit is on my other block, I used a rubber expandable freeze plug grommet thingy on my EG for the breather box which i thought was a good solution but..it wasnt there anymore when I took the catchcan fittings off that block..so..
0 2020/04/24 23:47:54
No studs on firewall to mount prop valve?
No studs on firewall to mount prop valve?
0 2020/04/24 23:52:06