Honda-Tech - Honda Forum Discussion
Oh snap! Vtec engine harness
Oh snap! Vtec engine harness
0 2017/10/23 01:55:03
Which alt shoild I use?
Which alt shoild I use?
0 2017/10/23 01:54:58
Cooler sandwhich
Cooler sandwhich
0 2017/10/23 01:54:53
New longer turbo line. Oldmwas bit short new is now a bit long with the datalog tee and restrictor
New longer turbo line. Oldmwas bit short new is now a bit long with the datalog tee and restrictor
0 2017/10/23 01:54:47
New seal installed.
New seal installed.
0 2017/10/21 21:48:21
Little better.
Little better.
0 2017/10/21 21:48:18
So dirty eww.
So dirty eww.
0 2017/10/21 21:48:13
Or this!
Or this!
0 2017/10/21 21:48:08
Or this.
Or this.
0 2017/10/21 21:48:05
Only three things should ever go in a Honda Manual, this.
Only three things should ever go in a Honda Manual, this.
0 2017/10/21 21:48:02
New and old
New and old
0 2017/10/21 21:47:58
0 2017/10/21 21:47:56
Double checking size
Double checking size
0 2017/10/21 21:47:54
Perfecf sized socket for installing pilot bearing
Perfecf sized socket for installing pilot bearing
0 2017/10/21 21:47:52
Arp instrictions and lube, threadlocker
Arp instrictions and lube, threadlocker
0 2017/10/21 21:47:49
0 2017/10/21 21:47:46
0 2017/10/21 21:47:43
Even hand installed bolts in order. Put arp lube where the under cap would rest on flywheel as well as bolt.
Even hand installed bolts in order. Put arp lube where the under cap would rest on flywheel as well as bolt.
0 2017/10/21 21:47:41
0 2017/10/21 21:47:37
0 2017/10/21 21:47:34
Flywheel torqued and cleaned
Flywheel torqued and cleaned
0 2017/10/21 21:47:31
0 2017/10/21 21:47:28
0 2017/10/21 21:47:26
My clutch..pretty decent for organic fullface.
My clutch..pretty decent for organic fullface.
0 2017/10/21 21:47:23
Miraculous Clutch Alignment Tool
Miraculous Clutch Alignment Tool
0 2017/10/21 21:47:21
PP installed
PP installed
0 2017/10/21 21:47:18
And water inlet bolts.
And water inlet bolts.
0 2017/10/21 21:47:15
Installed some of the hardware i have. Maybe I'll make a kit if people likey. Distributor bolts and cap bolts.
Installed some of the hardware i have. Maybe I'll make a kit if people likey. Distributor bolts and cap bolts.
0 2017/10/21 21:47:09
There is a turbo oil restrictor tee'd in here before the oil pressure sender which ill have to figure out how to datalog.
There is a turbo oil restrictor tee'd in here before the oil pressure sender which ill have to figure out how to datalog.
0 2017/10/21 21:47:04
Catchcan fittings, stock pcv block (newfangled ruvber expansion plug test v0.1?) and sandwich.
Catchcan fittings, stock pcv block (newfangled ruvber expansion plug test v0.1?) and sandwich.
0 2017/10/21 21:46:51
0 2017/10/19 23:47:10
And some minions, come help me!
And some minions, come help me!
0 2017/10/19 23:47:06
I need a garage
I need a garage
0 2017/10/19 23:47:03
0 2017/10/19 23:47:00
0 2017/10/19 23:46:55
0 2017/10/19 23:46:51
0 2017/10/19 23:46:48
0 2017/10/19 23:46:43
0 2017/10/19 23:46:39
0 2017/10/19 23:46:34