Honda-Tech - Honda Forum Discussion
Flywheel after resurfacing 16.6lbs now. .2 of a lb weight loss woo woo!!!! Lol
Flywheel after resurfacing 16.6lbs now. .2 of a lb weight loss woo woo!!!! Lol
0 2016/07/14 14:26:21
Stg.2 xtd clutch kit. Need clutch and flywheel bolts. Mine were trashed and heads were starting to round off badly.
Stg.2 xtd clutch kit. Need clutch and flywheel bolts. Mine were trashed and heads were starting to round off badly.
0 2016/07/14 14:27:47
Flywheel and pressure plate bolts arrived! Hopefully decking motor later today.
Flywheel and pressure plate bolts arrived! Hopefully decking motor later today.
0 2016/07/23 08:55:26
Motor and trans are decked. Still need to hook up the electrical,cooling, exhaust, shift linkage and put axles back in along with new brakes. Almost there. Thanks for looking. And give me feedback dammit lol.
Motor and trans are decked. Still need to hook up the electrical,cooling, exhaust, shift linkage and put axles back in along with new brakes. Almost there. Thanks for looking. And give me feedback dammit lol.
0 2016/07/23 16:44:55
Installed new vc with new gaskets. Pleased!!!!
Installed new vc with new gaskets. Pleased!!!!
0 2016/08/09 17:04:46
Repainted intake to cover up chips and scratches.
Repainted intake to cover up chips and scratches.
0 2016/08/09 17:06:27
New hoses in.
New hoses in.
0 2016/08/09 17:07:17
Hammertoned the strut bar while i was at it. I had a tweaker painting attack. Lol
Hammertoned the strut bar while i was at it. I had a tweaker painting attack. Lol
0 2016/08/09 17:07:24
Rims and tires installed. Drove it for the 1st time today.
Rims and tires installed. Drove it for the 1st time today.
0 2016/09/20 16:27:34
Lowering it soon. Progress cs2 are calling my name.
Lowering it soon. Progress cs2 are calling my name.
0 2016/09/20 16:28:47
D15b is in and running but has some idle issues that i need to investigate. Xtd clutch engages beautifully. So stoked taking it down the street for the 1st time. Start to finish its been all me so to look back to the beginning is an emotional journey for sure. Thank you all for coming along from the start. Now i just need to fine tune everything and get it running tight so i can transition it to my daily.
D15b is in and running but has some idle issues that i need to investigate. Xtd clutch engages beautifully. So stoked taking it down the street for the 1st time. Start to finish its been all me so to look back to the beginning is an emotional journey for sure. Thank you all for coming along from the start. Now i just need to fine tune everything and get it running tight so i can transition it to my daily.
0 2016/09/20 16:30:51
0 2016/09/28 16:38:59
Godspeed lcas. Picked em up for 30 bnib. Score!!!!!
Godspeed lcas. Picked em up for 30 bnib. Score!!!!!
0 2016/09/30 07:47:36
Subframe brace bnib. Picked up for 20. Running to hilco today for upgraded hardware to install.
Subframe brace bnib. Picked up for 20. Running to hilco today for upgraded hardware to install.
0 2016/09/30 07:48:28
Before
Before
0 2016/09/30 13:54:19
During
During
0 2016/09/30 13:56:42
After. Much cleaner.
After. Much cleaner.
0 2016/09/30 13:58:08
I like the blue and machine contrast.
I like the blue and machine contrast.
0 2016/09/30 17:39:26
New master cylinder to deal with the spongy pedal issue. Getting closer to being a daily. Ill update with installed photos.
New master cylinder to deal with the spongy pedal issue. Getting closer to being a daily. Ill update with installed photos.
0 2016/09/30 17:40:04
Old cylinder about to come out.
Old cylinder about to come out.
0 2016/10/02 12:54:56
New cylinder bench bled. Ready to go in.
New cylinder bench bled. Ready to go in.
0 2016/10/02 12:55:35
New cylinder in and leak free. Bled the brakes and everything is ready. Brakes are firm and smooth. Now on to smog and nabbing those tags.
New cylinder in and leak free. Bled the brakes and everything is ready. Brakes are firm and smooth. Now on to smog and nabbing those tags.
0 2016/10/02 12:56:15
Installed lcas and brace a few days ago. Discovered some sketchy bushings that ill need to address in the rta. Overall pleased with the aesthetics.
Installed lcas and brace a few days ago. Discovered some sketchy bushings that ill need to address in the rta. Overall pleased with the aesthetics.
0 2016/10/03 07:52:57
0 2016/10/05 07:21:56
Picked up some amber corners and a 20pc gunmetal washer set for 20 bux.
Picked up some amber corners and a 20pc gunmetal washer set for 20 bux.
0 2016/10/14 21:21:45
Should match the gunmetal theme nicely underhood. Detailing the bay before installing.
Should match the gunmetal theme nicely underhood. Detailing the bay before installing.
0 2016/10/14 21:23:13
Ambers on. I dig em.
Ambers on. I dig em.
0 2016/10/15 19:17:47
Much better look than oem corners.
Much better look than oem corners.
0 2016/10/15 19:18:11
Spent an hour with some soapy water, rags and wd40 cleaning parts of the bay to install the washers. Still need to clean more but looking better.
Spent an hour with some soapy water, rags and wd40 cleaning parts of the bay to install the washers. Still need to clean more but looking better.
0 2016/10/15 19:19:19
Full fg2 catback for 100. Getting it this weekend. Finallly able to get rid of the old rattling and rusted exhaust.
Full fg2 catback for 100. Getting it this weekend. Finallly able to get rid of the old rattling and rusted exhaust.
0 2016/10/20 12:34:44
Weird update. New strut hardware from a neighbor. Bling!!! Lol
Weird update. New strut hardware from a neighbor. Bling!!! Lol
0 2016/10/31 16:31:12
0 2016/10/31 16:36:41
I know i need to clean still but stoked because the old nuts looked like ass.
I know i need to clean still but stoked because the old nuts looked like ass.
0 2016/10/31 16:36:55
Nrg gunmetal strut bars. Got em for 50 off of craigslist. Love the look and the quality and welds are much better then what i have now. Btw giving away my other strut bar if anyone who reads this and doesnt currently have one and is willing to make the trip for it. Lemme know. Pics are on previous pages.
Nrg gunmetal strut bars. Got em for 50 off of craigslist. Love the look and the quality and welds are much better then what i have now. Btw giving away my other strut bar if anyone who reads this and doesnt currently have one and is willing to make the trip for it. Lemme know. Pics are on previous pages.
0 2016/11/08 12:50:42
0 2016/11/08 12:54:00
Stoked to have these. I know they are not a carbing 3 point but its the best setup ive had yet.
Stoked to have these. I know they are not a carbing 3 point but its the best setup ive had yet.
0 2016/11/08 12:54:13
Napa 641-2791 06 acura tl studs. 3/8 of an inch taller than stock studs and same spline count. I got the front 8 for 17.##. Much cheap alternative to arp.
Napa 641-2791 06 acura tl studs. 3/8 of an inch taller than stock studs and same spline count. I got the front 8 for 17.##. Much cheap alternative to arp.
0 2016/11/30 20:59:38
Hey guys! Spoon is back at it with the resurrection build got some new toys today.
Hey guys! Spoon is back at it with the resurrection build got some new toys today.
0 2017/02/22 18:09:53
Momo monte carlo 320mm wheel and not pictured is the boss hub to mount it. Excited because being 6"3 i need all the legroom help i can get.
Momo monte carlo 320mm wheel and not pictured is the boss hub to mount it. Excited because being 6"3 i need all the legroom help i can get.
0 2017/02/22 18:11:00
K tuned lagrima knob. So comfortable to put thru the gears and much taller than old setup.
K tuned lagrima knob. So comfortable to put thru the gears and much taller than old setup.
0 2017/02/22 18:15:28