Honda-Tech - Honda Forum Discussion
Metal sheet to mold the widebody, cause I wanted as least bondo as possible since it can crack etc.
Metal sheet to mold the widebody, cause I wanted as least bondo as possible since it can crack etc.
0 2016/03/23 15:19:05
Also went ahead and bought the AEM 320lph e85 compatible, since she has an oem fuel pump which might be bad from all that time without being started. And since the Grams 1000cc injectors were too short, bought a set of extensions from O&J Performance.
Also went ahead and bought the AEM 320lph e85 compatible, since she has an oem fuel pump which might be bad from all that time without being started. And since the Grams 1000cc injectors were too short, bought a set of extensions from O&J Performance.
0 2016/03/17 14:28:35
And here after pull etc, cardboard is there cause they were showing me the idea of what they had planned for her, and I can honestly say I am really satisfied with the results so far.
And here after pull etc, cardboard is there cause they were showing me the idea of what they had planned for her, and I can honestly say I am really satisfied with the results so far.
0 2016/03/17 14:28:25
Heres a before picture, you can see how much poke those 285s had on her oem body
Heres a before picture, you can see how much poke those 285s had on her oem body
0 2016/03/17 14:28:08
0 2016/03/17 14:25:20
Also, since the Grams 1000cc injectors didnt quite fit on the RBC bought a set of extensions from O&J Performance, and bought the AEM e85 compatible 356lph Fuel Pump from my good friend Jean at JDM Express.
Also, since the Grams 1000cc injectors didnt quite fit on the RBC bought a set of extensions from O&J Performance, and bought the AEM e85 compatible 356lph Fuel Pump from my good friend Jean at JDM Express.
0 2016/03/17 14:20:45
And here is after, the cardboard is there cause they were showing me the idea of what they had planned for it.
And here is after, the cardboard is there cause they were showing me the idea of what they had planned for it.
0 2016/03/17 14:20:34
Heres a before look, of how much poke there was with those 285s
Heres a before look, of how much poke there was with those 285s
0 2016/03/17 14:20:20
Geez not even done and already looking monstrous, Im a sucker for the whole "battle stance" look.
Geez not even done and already looking monstrous, Im a sucker for the whole "battle stance" look.
0 2016/03/17 14:19:20
Compare to the pale usdm look, Id pick kouki 1000 times.
Compare to the pale usdm look, Id pick kouki 1000 times.
0 2016/02/17 15:23:20
Theres just something about these that just makes people look lol
Theres just something about these that just makes people look lol
0 2016/02/17 15:22:59
0 2016/02/15 19:16:00
0 2016/02/12 11:52:24
Since we had to remove the dash, took a pic of the ac boxes cause in this Fl weather you need ac. Lol
Since we had to remove the dash, took a pic of the ac boxes cause in this Fl weather you need ac. Lol
0 2016/02/12 11:52:13
0 2016/02/12 11:51:40
0 2016/02/12 11:51:00
0 2016/02/12 09:19:59
0 2016/02/12 08:35:39
Shifter Box and Shifter cables are ready to be installedd, But kinda want to do it all at once so Ill wait lol
Shifter Box and Shifter cables are ready to be installedd, But kinda want to do it all at once so Ill wait lol
0 2016/01/28 06:35:56
Salud!
Salud!
0 2016/01/20 09:47:46
0 2016/01/20 09:31:33
Car is pretty much complete at this point. Scored a nice set of RPF1 with 285/40 Nitto NT555s for a great price. Sad part is that theyre too big for the car, but no worries. Body will be pulled and plated to create an OEM style wider body. To properly fit these monsters. And yes the car will have AC, but no Power Steering. Planning on boosting down the road.
Car is pretty much complete at this point. Scored a nice set of RPF1 with 285/40 Nitto NT555s for a great price. Sad part is that theyre too big for the car, but no worries. Body will be pulled and plated to create an OEM style wider body. To properly fit these monsters. And yes the car will have AC, but no Power Steering. Planning on boosting down the road.
0 2016/01/16 12:58:42
Installation was easy and clearance was good. Read that the sway bar was going to be a problem but it went right in, no problems.
Installation was easy and clearance was good. Read that the sway bar was going to be a problem but it went right in, no problems.
0 2016/01/16 12:58:42
After almost 3 weeks searching for fenders found a pair lol 1hr and 30min away but it was worth the drive for $120 cant beat it.
After almost 3 weeks searching for fenders found a pair lol 1hr and 30min away but it was worth the drive for $120 cant beat it.
0 2016/01/16 12:58:41
Skunk2 70mm Tb, along with the ktuned tb adapter plate.
Skunk2 70mm Tb, along with the ktuned tb adapter plate.
0 2016/01/16 12:58:40
Here got caught doing hoonigan shenanigans lol Mugen bumper finally came in. Didnt have a truck at the moment :P
Here got caught doing hoonigan shenanigans lol Mugen bumper finally came in. Didnt have a truck at the moment :P
0 2016/01/16 12:58:40
Test fitting the bumper, and fitment was good at this point..
Test fitting the bumper, and fitment was good at this point..
0 2016/01/16 12:58:39
Starting to look like a car again lol xD
Starting to look like a car again lol xD
0 2016/01/16 12:58:39
Then had some clearance issues with the headlights as this is not an original mugen but a rep (VIS) But the guys at XMP made sure fitment was perfect.
Then had some clearance issues with the headlights as this is not an original mugen but a rep (VIS) But the guys at XMP made sure fitment was perfect.
0 2016/01/16 12:58:37
Made a trip to Honda to purchase the oem RBC IM, along with a new Nardi Torino, black suede with blue stitching to match the interior, and my Skunk2 Mega Power RR Exhaust came in.
Made a trip to Honda to purchase the oem RBC IM, along with a new Nardi Torino, black suede with blue stitching to match the interior, and my Skunk2 Mega Power RR Exhaust came in.
0 2016/01/16 12:58:37
Engine is in with no components, but looking really good. No issues found at this point.
Engine is in with no components, but looking really good. No issues found at this point.
0 2016/01/16 12:58:36
Another package came in the mail, the skunk2 alpha header. Cant wait to put this on.
Another package came in the mail, the skunk2 alpha header. Cant wait to put this on.
0 2016/01/16 12:58:36
Most components in already, coming together nicely.
Most components in already, coming together nicely.
0 2016/01/16 12:58:35
Here is the man that has made all of this become reality. Xul without a doubt one of the best at his line of work, caught doing the brake tuck.
Here is the man that has made all of this become reality. Xul without a doubt one of the best at his line of work, caught doing the brake tuck.
0 2016/01/15 12:36:18
Here caught the man again, this time wiring up the dash, making sure everything works the way it should.
Here caught the man again, this time wiring up the dash, making sure everything works the way it should.
0 2016/01/15 12:29:12
Then we have the engine bay, after putting most things in. Just admire that brake tuck! Only one in the US. And Yes, Wipers were removed. Color is Paradise Blue Green Pearl, thats why it looks blue in some pics, and green in others. But, see what I mean, even though its not fully shaved it looks great!
Then we have the engine bay, after putting most things in. Just admire that brake tuck! Only one in the US. And Yes, Wipers were removed. Color is Paradise Blue Green Pearl, thats why it looks blue in some pics, and green in others. But, see what I mean, even though its not fully shaved it looks great!
0 2016/01/15 12:29:12
We prepped and Semi-Shaved the engine bay. Idk why I dont like the fully shaved bay, it looks fake lol.. But thats just me.
We prepped and Semi-Shaved the engine bay. Idk why I dont like the fully shaved bay, it looks fake lol.. But thats just me.
0 2016/01/15 12:29:11
Here I got caught applying Seam Sealer to the inside part of the firewall to prevent leaks, and fully seal the weld.
Here I got caught applying Seam Sealer to the inside part of the firewall to prevent leaks, and fully seal the weld.
0 2016/01/15 12:29:11
Then we mocked up the dash to make sure it all fits, and everything fit perfectly. So we were ready to advance into the next step.
Then we mocked up the dash to make sure it all fits, and everything fit perfectly. So we were ready to advance into the next step.
0 2016/01/15 12:29:10
So after another shop almost made me loose the car because they claimed they knew what they were doing, I brought it back to XMP to do everything there. You can admire some of their insane builds in the background.
So after another shop almost made me loose the car because they claimed they knew what they were doing, I brought it back to XMP to do everything there. You can admire some of their insane builds in the background.
0 2016/01/15 12:29:09