Honda-Tech - Honda Forum Discussion
and #2.
and #2.
0 2015/10/05 12:12:01
A closer look at cylinder #3...
A closer look at cylinder #3...
0 2015/10/05 12:11:45
all torqued down to ARP specs.
all torqued down to ARP specs.
0 2015/10/05 12:10:50
Main bearings, crank, rod bearings, and rod caps...
Main bearings, crank, rod bearings, and rod caps...
0 2015/10/05 12:10:34
0 2015/10/05 12:10:05
Pistons and rods are in...
Pistons and rods are in...
0 2015/10/05 12:09:49
0 2015/10/05 12:07:18
0 2015/10/05 12:07:05
0 2015/10/05 11:58:58
0 2015/10/05 11:58:38
0 2015/10/05 11:57:57
0 2015/10/05 11:56:57
Ahhh,,,, Much better.
Ahhh,,,, Much better.
0 2015/10/05 10:52:45
Garbino!!!
Garbino!!!
0 2015/10/05 10:50:09
What's this?... Made in China?!
What's this?... Made in China?!
0 2015/10/05 10:49:56
YEY! My bearings came!....
YEY! My bearings came!....
0 2015/10/05 10:46:27
and on the block.
and on the block.
0 2015/10/05 10:19:49
figuring out the stock bearing line up on the crank...
figuring out the stock bearing line up on the crank...
0 2015/10/05 10:19:33
Cleaning the oil holes in the crank...
Cleaning the oil holes in the crank...
0 2015/10/05 10:19:15
Had to remove the oil plug and clean this out for the B1 head.
Had to remove the oil plug and clean this out for the B1 head.
0 2015/10/05 10:14:26
0 2015/10/05 10:14:05
Looking good
Looking good
0 2015/10/05 10:13:57
Cleaning main threads and oil holes.
Cleaning main threads and oil holes.
0 2015/10/05 10:13:05
This was straight from the machinist.
This was straight from the machinist.
0 2015/10/05 10:12:40
surely not the worst.
surely not the worst.
0 2015/10/05 09:47:15
H22 rods from Eagle. Not the BEST on the market but certainly better than OEM and....
H22 rods from Eagle. Not the BEST on the market but certainly better than OEM and....
0 2015/10/05 09:47:05
0 2015/10/05 09:46:54
So pretty...
So pretty...
0 2015/10/05 09:46:46
0 2015/10/05 09:46:36
RUST!
RUST!
0 2015/10/05 09:41:02
and more....
and more....
0 2015/10/05 09:40:50
rust...
rust...
0 2015/10/05 09:40:27
rust...
rust...
0 2015/10/05 09:40:13
Ugh! Gorgeous right?...
Ugh! Gorgeous right?...
0 2015/10/05 09:39:56
so I dumped some brake fluid into the ports and directly into the cylinders. And after about a 48hr soak I was able to crank it around!
so I dumped some brake fluid into the ports and directly into the cylinders. And after about a 48hr soak I was able to crank it around!
0 2015/10/04 22:45:58
Because the valves, on the exhaust side, were visibly shot...
Because the valves, on the exhaust side, were visibly shot...
0 2015/10/04 22:45:48
But I wasn't sure if it was the bottom end or the top?...
But I wasn't sure if it was the bottom end or the top?...
0 2015/10/04 22:42:03
When I bought it I couldn't turn the crank so I knew I was in for some work.
When I bought it I couldn't turn the crank so I knew I was in for some work.
0 2015/10/04 22:41:52
F22B2 that spent some time in the elements for $40
F22B2 that spent some time in the elements for $40
0 2015/10/04 22:41:42
0 2015/10/04 22:40:21