Honda-Tech - Honda Forum Discussion
0 2015/07/09 08:47:47
0 2015/07/09 08:53:49
The RC46
The RC46
0 2015/07/09 09:05:08
The basket case hatch in need of some TLC
The basket case hatch in need of some TLC
0 2015/07/09 09:06:29
Bisimoto 1st Gen V2 Header
Bisimoto 1st Gen V2 Header
0 2015/07/09 13:11:12
Magnaflow Resonator
Magnaflow Resonator
0 2015/07/09 13:18:18
Magnaflow End Muffler
Magnaflow End Muffler
0 2015/07/09 13:19:03
Okay just ordered a full 2.5in mandrel bent piping kit.
Okay just ordered a full 2.5in mandrel bent piping kit.
0 2015/07/15 07:45:29
Okay I just ordered a full 2.5in mandrel bent piping kit
Okay I just ordered a full 2.5in mandrel bent piping kit
0 2015/07/15 07:57:58
0 2015/07/17 15:05:37
0 2015/07/17 15:05:38
0 2015/07/17 15:05:40
0 2015/07/17 15:05:41
2.25 inch inner diameter collector.
2.25 inch inner diameter collector.
0 2015/07/17 15:09:14
0 2015/07/17 15:09:15
2.36 inch inner diameter for the Down pipe/ Test pipe what ever you want to call it.
2.36 inch inner diameter for the Down pipe/ Test pipe what ever you want to call it.
0 2015/07/17 15:09:17
0 2015/07/17 15:09:19
0 2015/07/17 15:09:20
2.5 inch outer diameter will go very nicely with the 2.5 inch inner diameter mandrel bent piping kit and two, 2.5 inch magnaflow mufflers.
2.5 inch outer diameter will go very nicely with the 2.5 inch inner diameter mandrel bent piping kit and two, 2.5 inch magnaflow mufflers.
0 2015/07/17 15:09:22
0 2015/07/17 15:09:23
Here is the stock z6 intake manifold before I port matched it to the GSR throttle body.
Here is the stock z6 intake manifold before I port matched it to the GSR throttle body.
0 2015/07/17 16:08:05
Here you can see where I had to run a six inch bolt through the frame to the lower torque mont.
Here you can see where I had to run a six inch bolt through the frame to the lower torque mont.
0 2015/07/17 16:08:08
I had to break the lower torque mount off due to the broken weld on the inner frame nut.
I had to break the lower torque mount off due to the broken weld on the inner frame nut.
0 2015/07/17 16:08:09
Here you can see the new bolt I put in and the new nut and bolt I had to run through to the top of the frame.
Here you can see the new bolt I put in and the new nut and bolt I had to run through to the top of the frame.
0 2015/07/17 16:08:11
Throw back to how the car was when I got it. Corny wheels and all lol.
Throw back to how the car was when I got it. Corny wheels and all lol.
0 2015/07/17 16:08:13
Here you can see most of the ac removed. I would like to remove the heater core/evaporator/blower, but I honestly do not have the time and space to pull the dash at the moment. Also you can see where I ran the bolt through the frame to the lower toque mount.
Here you can see most of the ac removed. I would like to remove the heater core/evaporator/blower, but I honestly do not have the time and space to pull the dash at the moment. Also you can see where I ran the bolt through the frame to the lower toque mount.
0 2015/07/17 16:08:18
One of the only things this car has going for it, a relatively clean interior. I just need to touch up the fabric on the doors.
One of the only things this car has going for it, a relatively clean interior. I just need to touch up the fabric on the doors.
0 2015/07/17 16:08:20
Filling new OEM torque mounts with polyurethane.
Filling new OEM torque mounts with polyurethane.
0 2015/07/17 16:08:22
Like usual, most of the studs removing instead of the nut off the stud....
Like usual, most of the studs removing instead of the nut off the stud....
0 2015/07/17 16:08:24
Here you can see the material that needed to be removed from the intake manifold to match the larger GSR throttle body.
Here you can see the material that needed to be removed from the intake manifold to match the larger GSR throttle body.
0 2015/07/17 16:08:25
Filled torque mount.
Filled torque mount.
0 2015/07/17 16:08:27
This is hilarious. Look at the ECU that was originally hooked up. Apparently it is actually for a 94-95 automatic LS Integra
This is hilarious. Look at the ECU that was originally hooked up. Apparently it is actually for a 94-95 automatic LS Integra
0 2015/07/17 16:08:28
All power steering components removed, then looped.
All power steering components removed, then looped.
0 2015/07/17 16:08:30
Original OBD1 injectors, cleaned/rebuilt/balanced to like new.
Original OBD1 injectors, cleaned/rebuilt/balanced to like new.
0 2015/07/17 16:08:32
0 2015/07/17 16:08:33
I managed to find a like new, aluminum motor mount.
I managed to find a like new, aluminum motor mount.
0 2015/07/17 16:08:35
Miscellaneous AC/power steering/Cruise control parts that were removed to drop weight and clean up the engine bay, as well as allow use of the Bisimoto header.
Miscellaneous AC/power steering/Cruise control parts that were removed to drop weight and clean up the engine bay, as well as allow use of the Bisimoto header.
0 2015/07/17 16:08:40
lower torque mounts with new nuts and bolts.
lower torque mounts with new nuts and bolts.
0 2015/07/17 16:08:42
0 2015/07/17 16:08:44
Hole drilled through frame to mount the lower torque mount.
Hole drilled through frame to mount the lower torque mount.
0 2015/07/17 16:08:46