Honda-Tech - Honda Forum Discussion
got tired of my interior looking empty without hope, so i decided to mount my black dash and other black pieces
got tired of my interior looking empty without hope, so i decided to mount my black dash and other black pieces
0 2017/06/11 23:33:38
very happy camper today! received my bottom end back from the machine shop, now to scramble to get this together. hopefully next week i receive my cylinder head back.
very happy camper today! received my bottom end back from the machine shop, now to scramble to get this together. hopefully next week i receive my cylinder head back.
0 2017/06/09 23:11:51
Trailings arms looking amazing
Trailings arms looking amazing
0 2017/05/27 21:17:30
Front knuckles all covered in pour 15, ready to be put back together
Front knuckles all covered in pour 15, ready to be put back together
0 2017/05/27 21:17:24
removed bushings from trail arms, lower ball joints and bearings. everything is going to be new.
removed bushings from trail arms, lower ball joints and bearings. everything is going to be new.
0 2017/05/23 20:47:17
I've had this js racing oil cap for sometime now, a couple builds later and it finds its way into another one
I've had this js racing oil cap for sometime now, a couple builds later and it finds its way into another one
0 2017/05/23 20:47:11
received my S2000 clutch master cylinder and spacer today.
received my S2000 clutch master cylinder and spacer today.
0 2017/05/23 20:47:07
my momo wheel and hub ive had for some time now, threw it on even though i have no interior i also have a nice stash of parts going on.
my momo wheel and hub ive had for some time now, threw it on even though i have no interior i also have a nice stash of parts going on.
0 2017/05/19 22:05:05
removed my rear bumper bar and coated in pour 15 just like the wheel wells, they were pretty beat up, look amazing now. also coated the JDM front bar
removed my rear bumper bar and coated in pour 15 just like the wheel wells, they were pretty beat up, look amazing now. also coated the JDM front bar
0 2017/05/19 22:04:59
my car is getting there, slowly but surely.
my car is getting there, slowly but surely.
0 2017/05/19 21:15:56
took everything in the rear end apart. coating the wheel wells before apply anti rust sealer just like i did in the front
took everything in the rear end apart. coating the wheel wells before apply anti rust sealer just like i did in the front
0 2017/05/19 21:15:51
2k primer laid down. next up is blocking and then coating one more time before wet sand. almost there.
2k primer laid down. next up is blocking and then coating one more time before wet sand. almost there.
0 2017/05/19 21:15:46
0 2017/05/19 21:15:41
0 2017/05/19 21:15:37
0 2017/05/19 21:15:32
finished my brake lines before i started prepping for paint
finished my brake lines before i started prepping for paint
0 2017/05/19 21:15:27
skunk2 street ultra, 70mm throttle body and aem fuel rail. simple engine set up but its going to be rev happy.
skunk2 street ultra, 70mm throttle body and aem fuel rail. simple engine set up but its going to be rev happy.
0 2017/05/19 21:15:22
finish product of that door that was a paint in the ass.
finish product of that door that was a paint in the ass.
0 2017/05/19 21:15:15
clear side markers with jumper harness and bulbs from ICB. i love the little details
clear side markers with jumper harness and bulbs from ICB. i love the little details
0 2017/05/19 21:15:11
skunk2 dual valve springs and TI retainers for my motor, which i got the block back and the cylinder head is at the machine shop
skunk2 dual valve springs and TI retainers for my motor, which i got the block back and the cylinder head is at the machine shop
0 2017/05/19 21:15:07
this door by far was the most fucked. had to use air craft stripper and bring it down to bare metal. primered the door and started to shave the moldings
this door by far was the most fucked. had to use air craft stripper and bring it down to bare metal. primered the door and started to shave the moldings
0 2017/05/19 21:15:02
0 2017/05/19 21:14:56
0 2017/05/19 21:14:54
pretty damn happy how the car is coming along.
pretty damn happy how the car is coming along.
0 2017/04/06 22:04:34
finally got around to welding the side moldings shut and straighten out the doors. they are as good as they are going to get.
finally got around to welding the side moldings shut and straighten out the doors. they are as good as they are going to get.
0 2017/04/06 22:04:33
rolled the car out, makes a difference when its under sun light.
rolled the car out, makes a difference when its under sun light.
0 2017/04/06 22:01:44
somewhat assembled the car back together, i guess i am getting there
somewhat assembled the car back together, i guess i am getting there
0 2017/04/06 22:01:31
0 2015/06/24 21:44:00
0 2015/06/24 21:43:56
0 2015/06/24 21:43:52
0 2015/06/24 21:43:49
0 2015/06/24 21:43:43