Honda-Tech - Honda Forum Discussion
So left trim I started applying 3m strip-Calk and I didnt do too well used too much on the clips.
So left trim I started applying 3m strip-Calk and I didnt do too well used too much on the clips.
0 2016/01/21 18:43:00
Than I started on the right side, and I must say I greatly improved compared to the left side. Now both sides are sealed so water wont leak into the trunk, but the main clip which is called clip D is the problem to the leak. Will update tomorrow when I start on applying the culk on both clip D's.
Than I started on the right side, and I must say I greatly improved compared to the left side. Now both sides are sealed so water wont leak into the trunk, but the main clip which is called clip D is the problem to the leak. Will update tomorrow when I start on applying the culk on both clip D's.
0 2016/01/21 18:45:04
The moment you have no water in your trunk and the rear drains work =)
The moment you have no water in your trunk and the rear drains work =)
0 2016/01/25 13:01:04
Waiting on my rear bumper to get fixed. Most of the holes were broken. Should be done today and fonally have a alighned rear bumper
Waiting on my rear bumper to get fixed. Most of the holes were broken. Should be done today and fonally have a alighned rear bumper
0 2016/01/25 13:06:55
Installing weatherstripping from a 96 sol. Hopefully it will stop my leak inside.
Installing weatherstripping from a 96 sol. Hopefully it will stop my leak inside.
0 2016/01/25 13:56:00
All installed. Will need some weatherstripping adhesive for some areas. Also meed to find the conditioner for the weatherstripping since this one needs it bad.
All installed. Will need some weatherstripping adhesive for some areas. Also meed to find the conditioner for the weatherstripping since this one needs it bad.
0 2016/01/25 13:57:25
Bought another car, but going to sell this 1988 crx si. Fun car, but want one that more complete. Missing interior and has some shot shocks haha. Once i sell it I am going to look for a 1991crx si for a daily and have my del sol as a garage queen. =)
Bought another car, but going to sell this 1988 crx si. Fun car, but want one that more complete. Missing interior and has some shot shocks haha. Once i sell it I am going to look for a 1991crx si for a daily and have my del sol as a garage queen. =)
1 2016/02/08 21:52:32
Came up on some real wheels. These rims are extremely light. Going to use these in the summer for sure.
Came up on some real wheels. These rims are extremely light. Going to use these in the summer for sure.
0 2016/02/15 16:27:29
Picked up some new real wheels
Picked up some new real wheels
0 2016/02/15 16:30:59
O you know just a SIR transtop del sol with red recaros down the block of my friends house.
O you know just a SIR transtop del sol with red recaros down the block of my friends house.
0 2016/03/02 00:09:53
My del sol and my neighbors slammed miata! Makes my car look normal height haha.
My del sol and my neighbors slammed miata! Makes my car look normal height haha.
0 2016/03/02 00:11:59
Just got bored and started making a hole in my center console.
Just got bored and started making a hole in my center console.
0 2016/03/21 18:31:12
Jk did it to install my fog light switch =)
Jk did it to install my fog light switch =)
0 2016/03/21 18:32:36
Extended studs and extended lug nuts installed with my sprint harts on
Extended studs and extended lug nuts installed with my sprint harts on
0 2016/03/24 21:37:14
Sprint harts installed =)
Sprint harts installed =)
0 2016/03/24 21:49:01
ITR shift boot fits very well
ITR shift boot fits very well
0 2016/03/27 18:05:35
Whats coming in store once school is over next month.
Whats coming in store once school is over next month.
0 2016/04/05 21:11:38
Im only doing this since my rotors are going bad. So in doing the BBK set up. Vtec Prelude 11.1 inch cryogenically frozen rotors with nsx hawk street pads.
Im only doing this since my rotors are going bad. So in doing the BBK set up. Vtec Prelude 11.1 inch cryogenically frozen rotors with nsx hawk street pads.
0 2016/04/05 21:12:49
Messing with my DSLR
Messing with my DSLR
0 2016/04/16 18:14:42
MMMM Extended lug nuts
MMMM Extended lug nuts
0 2016/04/16 18:15:44
http://www.bamshifts.com/ from this site love what this guy sells, and had this for over 3 weeks already and still smells good not to mention looks good!
http://www.bamshifts.com/ from this site love what this guy sells, and had this for over 3 weeks already and still smells good not to mention looks good!
0 2016/04/16 18:16:22
Sexual Gratification
Sexual Gratification
0 2016/04/16 18:19:39
All I really need is a paint job..Argg
All I really need is a paint job..Argg
0 2016/04/16 18:20:24
0 2016/04/17 20:53:22
Barely installed the itr boot
Barely installed the itr boot
0 2016/04/17 20:53:50
EDM/JDM Visors
EDM/JDM Visors
0 2016/04/17 20:54:09
ITR Shift Boot w/ Maven Countershift knob
ITR Shift Boot w/ Maven Countershift knob
0 2016/04/17 20:54:26
About time i start installing these 11inch prelude rotors on my car. No more school=more time to work on my car.
About time i start installing these 11inch prelude rotors on my car. No more school=more time to work on my car.
0 2016/05/24 19:53:36
Removed my h brace since i hit a dog and the dog bent it. Since that happened the h brace was against my exhaust system causing a rattling sound. You can see the white part if the metal of the brace being warmed and cooled.
Removed my h brace since i hit a dog and the dog bent it. Since that happened the h brace was against my exhaust system causing a rattling sound. You can see the white part if the metal of the brace being warmed and cooled.
0 2016/05/24 19:55:18
Painting the nsx calipers gold. Getting them rebuilt saturday. Cant wait; will install on sunday!
Painting the nsx calipers gold. Getting them rebuilt saturday. Cant wait; will install on sunday!
0 2016/05/27 02:49:21
Before I cleaned the caliper bore out since it was a bit rusty inside. The other caliper had no rust whatsoever so I was glad about that.
Before I cleaned the caliper bore out since it was a bit rusty inside. The other caliper had no rust whatsoever so I was glad about that.
0 2016/06/06 21:45:46
Showing everyone how bad that caliper bore and caliper was after years of just sitting in some strangers storage.
Showing everyone how bad that caliper bore and caliper was after years of just sitting in some strangers storage.
0 2016/06/06 21:46:14
I began rebuilding one and inserted the o-ring, but than i began inserting the new caliper into the caliper bore with the dust boot installed; well short story i pinched the boot and it ripped so I just sent one off to my uncle who owns a shop in stockton to rebuild them for me since im a clutz. Check his shop out its called Speedy Auto, pretty nice dude and always has resturning customers.
I began rebuilding one and inserted the o-ring, but than i began inserting the new caliper into the caliper bore with the dust boot installed; well short story i pinched the boot and it ripped so I just sent one off to my uncle who owns a shop in stockton to rebuild them for me since im a clutz. Check his shop out its called Speedy Auto, pretty nice dude and always has resturning customers.
0 2016/06/06 21:46:41
The other pistons where pretty bad, but her is a picture of the new calipers. So pretty
The other pistons where pretty bad, but her is a picture of the new calipers. So pretty
0 2016/06/06 21:47:05
Am after image of me cleaning them up with fine grit sand paper.
Am after image of me cleaning them up with fine grit sand paper.
0 2016/06/06 21:47:34
One is done! One more to go!
One is done! One more to go!
0 2016/06/08 12:07:56
Both ready to be installed, but not installing yet. I can already predict ill need a spacer just need to put one on and see what size of a spacer i will need. Hoping for at least 3mm.
Both ready to be installed, but not installing yet. I can already predict ill need a spacer just need to put one on and see what size of a spacer i will need. Hoping for at least 3mm.
0 2016/06/24 17:26:03
Finished rebuilding my nsx calipers. Ready for install soon.
Finished rebuilding my nsx calipers. Ready for install soon.
0 2016/06/25 12:30:01
Havent installed the 11 inch rotor yet, but just want to see if the caliper will clear my rim. Surprisingly it clears well just rubs one side of my rim just a bit but not bad since it still allows it to spin freely. Going to just buy a 5mm spacer to have it clear with no issues.
Havent installed the 11 inch rotor yet, but just want to see if the caliper will clear my rim. Surprisingly it clears well just rubs one side of my rim just a bit but not bad since it still allows it to spin freely. Going to just buy a 5mm spacer to have it clear with no issues.
0 2016/06/25 16:26:53
Just waiting for the spacers to come in now.
Just waiting for the spacers to come in now.
0 2016/06/29 15:13:33