Honda-Tech - Honda Forum Discussion
0 2015/04/06 06:04:50
0 2015/04/06 06:04:54
0 2015/04/06 06:05:51
0 2015/04/06 11:52:00
0 2015/04/06 11:52:09
ITR wheel installed.
ITR wheel installed.
0 2015/05/07 07:29:11
0 2015/09/09 18:18:51
0 2015/09/09 18:23:08
The turbo also had to be clocked with the drain being between 6 and 5 o'clock. Otherwise the feed would hit the manifold flange. It's definitely sloping more though.
The turbo also had to be clocked with the drain being between 6 and 5 o'clock. Otherwise the feed would hit the manifold flange. It's definitely sloping more though.
0 2015/09/20 08:48:07
Yo see how that fastener is oily? I keep having a drip there. That is the lowest point however. Just seems like a lot of oil to me.
Yo see how that fastener is oily? I keep having a drip there. That is the lowest point however. Just seems like a lot of oil to me.
0 2015/09/20 09:24:56
It sint do this prior to the new setup. The only thing I did to the turbo was clock it for the new manifold on both sides. Didn't notice anything damaged and it all went back together nice. Guess I need to search a bit and figure out where it's leaking from.
It sint do this prior to the new setup. The only thing I did to the turbo was clock it for the new manifold on both sides. Didn't notice anything damaged and it all went back together nice. Guess I need to search a bit and figure out where it's leaking from.
0 2015/09/20 11:21:27
0 2015/09/21 10:24:33
0 2015/09/24 18:17:58
0 2015/09/26 14:07:05
0 2015/09/26 14:07:38
0 2015/09/26 14:09:58
0 2015/09/26 14:10:37
0 2015/11/13 11:51:13
0 2015/11/13 11:52:09
0 2015/11/13 11:53:11
0 2016/01/19 19:55:35
0 2016/01/19 19:55:59
0 2016/01/19 19:56:13
0 2016/01/19 19:56:28
0 2016/01/19 19:56:52
0 2016/08/29 11:40:09
0 2016/12/29 09:02:44
0 2016/12/29 09:02:45
0 2016/12/29 09:02:46
0 2018/08/16 06:31:18
0 2018/08/16 06:31:38