Honda-Tech - Honda Forum Discussion
Had to pull up the carpet to hammer down the notch I found, and be able potentially weld it.
Had to pull up the carpet to hammer down the notch I found, and be able potentially weld it.
0 2015/04/26 22:29:48
Close up of the hole/notch. No idea how it got there, but I didn't do it. Definitely looks like the car was lowered onto something.
Close up of the hole/notch. No idea how it got there, but I didn't do it. Definitely looks like the car was lowered onto something.
0 2015/04/26 22:29:54
After hammering it down
After hammering it down
0 2015/04/26 22:29:56
The right rear subframe twist
The right rear subframe twist
0 2015/04/26 22:29:58
The left rear subframe
The left rear subframe
0 2015/04/26 22:30:00
The left rear subframe
The left rear subframe
0 2015/04/26 22:30:01
0 2015/04/26 22:30:03
.
.
0 2015/04/26 22:30:05
Also did a fuel pump while the tank was out.
Also did a fuel pump while the tank was out.
0 2015/04/26 22:30:06
Took off the headers to weld up a new flange
Took off the headers to weld up a new flange
0 2015/04/26 22:30:08
0 2015/04/26 22:30:10
0 2015/04/26 22:30:12
After getting the header off I decided not to cut and weld on the flange. The new 3 inch flange lined right up, only had to drill out some room for the bolts.
After getting the header off I decided not to cut and weld on the flange. The new 3 inch flange lined right up, only had to drill out some room for the bolts.
0 2015/04/26 22:30:14
Complete view with brace
Complete view with brace
0 2015/04/30 12:00:17
The patch
The patch
0 2015/04/30 12:00:19
All lined up now
All lined up now
0 2015/04/30 12:00:22
From under
From under
0 2015/04/30 12:00:29
Some of the new 3 inch exhaust
Some of the new 3 inch exhaust
0 2015/04/30 12:00:32
Work bench top
Work bench top
0 2015/04/30 12:00:36
0 2020/10/07 18:37:04
Built a new work bench
Built a new work bench
0 2015/04/30 12:00:38
0 2020/10/07 18:40:31
The Top, still going to edge it.
The Top, still going to edge it.
0 2015/04/30 12:00:41
0 2015/05/08 11:12:10
0 2021/02/08 20:08:07
0 2015/05/08 11:15:59
Obd1 Hondata
Obd1 Hondata
0 2021/02/08 20:09:00
0 2015/05/08 11:29:19
Found a k&n filter that fits
Found a k&n filter that fits
0 2021/02/08 20:09:38
0 2015/05/08 11:34:02
Put in new exhaust header to half mid pipe. I had a free cat back I stole the resonator from.
Put in new exhaust header to half mid pipe. I had a free cat back I stole the resonator from.
0 2021/02/08 20:10:31
New grounds and leads.
New grounds and leads.
0 2021/02/08 20:11:02
0 2015/05/08 11:34:21
Moroso oil pan
Moroso oil pan
0 2021/02/08 20:12:10
0 2015/05/08 11:34:43
New Rad
New Rad
0 2021/02/08 20:12:56
0 2015/05/08 11:34:59
0 2021/02/08 20:14:47
Fresh powder
Fresh powder
0 2021/02/08 20:16:25
New spark plug cover
New spark plug cover
0 2021/02/08 20:17:16