2001 Integra Type R
GUILOTINE
November 19, 2008
Description:
Engine:
K24 Short Block assembled by Blueprint Racing
Crank Lightened 4lb's, fully balanced and Teflon Coated
87.5mm Wiseco 12.5:1 IB spec custom pistons
K24 Pro I-Beam Rods w/Teflon Coating
OEM Honda Bearings with custom race treatment
Type S Oil Pump CnC modified
Hytech Baffled Oil Pan
Blueprint Head Studs
OEM Headgasket
K20A (JDM ITR) Cylinder head with Blueprint Stage 3 CnC porting w/ pro valve job (350cfm-ish)
OS Stainless Steel Flat Faced nitrate coated valves
Blueprint Dual Valve Springs w/Titanium retainers
Blueprint Stage 3 Cams
Custom RBC Manifold w/ Blueprint full race porting (cut open and re-welded). Match ported to an Rcrew throttle plate adaptor and a 72mm BDL Throttle body. Pitcrew then cut the water passage and shaved all the excess studs/welds, bead-blasted, and replummed it underneath with a AN fitting for that clean look.
Rcrew Insulated IM gasket
Rcrew K24 Stainless Steel Header
Rcrew Custom Stainless Steel Exhaust
Rcrew Fuel Rail
550cc Injectors
Walbro fuel pump
Teflon wrapped fuel lines
SX adjustable Fuel Pressure Regulator
All Black Earls AN fittings being used
Limited Edition Hasport Black engine mounts
Custom Engine Harness Built by Chasebays
Suspension:
USDM ITR 5-Lug w/ ARP Extended Studs
Blox Spherical Trailing Arm Bushings
King Motorsports Adjustable Control Arms
Mugen 26mm rear sway bar
Tein N1 Aluminum coilovers 20k front/ 24k rear
Braking:
Stoptech Big Brake kit
Slotted Rotors
Earls steel braided brake lines
ABS removal w/ all new custom brake lines
Engine:
K24 Short Block assembled by Blueprint Racing
Crank Lightened 4lb's, fully balanced and Teflon Coated
87.5mm Wiseco 12.5:1 IB spec custom pistons
K24 Pro I-Beam Rods w/Teflon Coating
OEM Honda Bearings with custom race treatment
Type S Oil Pump CnC modified
Hytech Baffled Oil Pan
Blueprint Head Studs
OEM Headgasket
K20A (JDM ITR) Cylinder head with Blueprint Stage 3 CnC porting w/ pro valve job (350cfm-ish)
OS Stainless Steel Flat Faced nitrate coated valves
Blueprint Dual Valve Springs w/Titanium retainers
Blueprint Stage 3 Cams
Custom RBC Manifold w/ Blueprint full race porting (cut open and re-welded). Match ported to an Rcrew throttle plate adaptor and a 72mm BDL Throttle body. Pitcrew then cut the water passage and shaved all the excess studs/welds, bead-blasted, and replummed it underneath with a AN fitting for that clean look.
Rcrew Insulated IM gasket
Rcrew K24 Stainless Steel Header
Rcrew Custom Stainless Steel Exhaust
Rcrew Fuel Rail
550cc Injectors
Walbro fuel pump
Teflon wrapped fuel lines
SX adjustable Fuel Pressure Regulator
All Black Earls AN fittings being used
Limited Edition Hasport Black engine mounts
Custom Engine Harness Built by Chasebays
Suspension:
USDM ITR 5-Lug w/ ARP Extended Studs
Blox Spherical Trailing Arm Bushings
King Motorsports Adjustable Control Arms
Mugen 26mm rear sway bar
Tein N1 Aluminum coilovers 20k front/ 24k rear
Braking:
Stoptech Big Brake kit
Slotted Rotors
Earls steel braided brake lines
ABS removal w/ all new custom brake lines
