Honda-Tech - Honda Forum Discussion
0 2019/08/23 18:25:55
0 2019/08/23 18:40:31
0 2019/08/23 18:41:15
For people interested in the sleeved block finally took the head off to show the sleeves and cylinders
For people interested in the sleeved block finally took the head off to show the sleeves and cylinders
0 2020/01/09 14:21:25
0 2020/01/09 14:21:33
You can see the bore and everything is freash as I’ve said
You can see the bore and everything is freash as I’ve said
0 2020/01/09 14:23:01
0 2020/01/17 09:14:13
0 2020/01/19 00:53:42
0 2020/01/20 19:33:08
0 2020/01/20 19:33:16
Cleaning the bay
Cleaning the bay
0 2020/01/20 19:33:24
0 2020/01/20 19:33:34
Degreased bay
Degreased bay
0 2020/01/20 19:33:43
Seats out so can clean inside
Seats out so can clean inside
0 2020/01/20 19:33:52
0 2020/01/20 19:34:00
0 2020/01/20 19:34:07
The head I’ll be using ported p72 with stock valves, super tech 85lb springs and retainers, skunk 2 lost motion, with pro 1 cams
The head I’ll be using ported p72 with stock valves, super tech 85lb springs and retainers, skunk 2 lost motion, with pro 1 cams
0 2020/01/25 09:36:18
0 2020/01/25 09:36:49
0 2020/01/25 10:02:46
83x89 b18a1 sleeved block all freash never fired.Aries outlaw hd piston wrist pin and ring package, crower billet rods, polish and balanced ls crank acl race bearings. This short block is good well up to 1300hp
83x89 b18a1 sleeved block all freash never fired.Aries outlaw hd piston wrist pin and ring package, crower billet rods, polish and balanced ls crank acl race bearings. This short block is good well up to 1300hp
0 2020/01/25 10:37:56
As you can tell the bores show this is all freashly done.
As you can tell the bores show this is all freashly done.
0 2020/01/25 10:38:28
Stock gsr short block rebuilt with 0 miles. with built head. Skunk 2 valves, blox springs and retainer, blox p2 cams and gears. Head has 1500miles in it.
Stock gsr short block rebuilt with 0 miles. with built head. Skunk 2 valves, blox springs and retainer, blox p2 cams and gears. Head has 1500miles in it.
0 2020/01/25 10:43:47
0 2020/01/25 10:44:18
Guess I got so port matching to do. 74mm Tb in performer x intake.
Guess I got so port matching to do. 74mm Tb in performer x intake.
0 2020/01/25 12:14:02
Engine all assembled. Had the block guard taken out of my gsr with ls crank eagle rods and wiseco piston short block and resurfaced got it back yesterday and assembled today
Engine all assembled. Had the block guard taken out of my gsr with ls crank eagle rods and wiseco piston short block and resurfaced got it back yesterday and assembled today
0 2020/01/25 18:28:42
0 2020/01/25 18:28:51
0 2020/01/25 18:29:01
Mocked up the turbo kit as well. The waste gate can go on top the manifold but I would have to clearance it. So I figured it wouldn’t hurt to clock it like this. Please someone lmk if I mite have gate control issues with this thanks.
Mocked up the turbo kit as well. The waste gate can go on top the manifold but I would have to clearance it. So I figured it wouldn’t hurt to clock it like this. Please someone lmk if I mite have gate control issues with this thanks.
0 2020/01/25 18:29:09
0 2020/01/28 19:53:06
0 2020/01/28 19:53:10
0 2020/01/28 19:53:12
If you can see the blue line.
If you can see the blue line.
0 2020/01/28 19:56:34
0 2020/01/29 18:14:19
If you can zoom enough if not I’ll take a close up tomorrow.
If you can zoom enough if not I’ll take a close up tomorrow.
0 2020/01/30 20:36:15
0 2020/01/30 20:38:46
Here’s some non VTEC gold for you guys. B20 itr super techs Pistons, arp rods, 84mm, p8r head ported, welded combustion chamber 13.2:1, full valve train, crower 405 cams, arp head studs, skunk ultra street intake fully ported, 74mm Tb, 1320 header with megaphone, and the icing on the cake is the built auto trans with Kevlar TCI clutch’s this is in a dc2 shell as you can tell she’s been sitting in the weeds getting it going next month. Made 202whp on stock cams on E
Here’s some non VTEC gold for you guys. B20 itr super techs Pistons, arp rods, 84mm, p8r head ported, welded combustion chamber 13.2:1, full valve train, crower 405 cams, arp head studs, skunk ultra street intake fully ported, 74mm Tb, 1320 header with megaphone, and the icing on the cake is the built auto trans with Kevlar TCI clutch’s this is in a dc2 shell as you can tell she’s been sitting in the weeds getting it going next month. Made 202whp on stock cams on E
0 2020/01/30 20:39:47
0 2020/01/31 14:32:22
0 2020/01/31 14:37:37
0 2020/01/31 17:33:52
0 2020/02/01 12:35:43