Honda-Tech - Honda Forum Discussion
0 2019/05/11 11:33:12
Got aem fuel rail and adjustable fuel pressure regulator with id1050x bolted up to the skunk 2 intake.
Got aem fuel rail and adjustable fuel pressure regulator with id1050x bolted up to the skunk 2 intake.
0 2019/05/11 11:33:43
Got the aem fuel rail, aem adjustable fpr and id 1050x injectors bolted up to the skunk2 intake.
Got the aem fuel rail, aem adjustable fpr and id 1050x injectors bolted up to the skunk2 intake.
0 2019/05/11 11:35:19
Installed all the valves and springs, sent it to the machine shop and they checked everything and said it was fine, just cleaned and decked it, made sure and ask the ra and they said their machine did 30 ra or better so shouldnt have any sealing issues.
Installed all the valves and springs, sent it to the machine shop and they checked everything and said it was fine, just cleaned and decked it, made sure and ask the ra and they said their machine did 30 ra or better so shouldnt have any sealing issues.
0 2019/05/11 11:36:31
Found a por15 engine enamel kit and started painting, stock gsr trans (for now)
Found a por15 engine enamel kit and started painting, stock gsr trans (for now)
0 2019/05/11 11:38:36
0 2019/05/11 11:39:27
0 2019/05/24 17:22:56
0 2019/05/24 17:23:50
0 2019/05/24 17:24:40
0 2019/05/24 17:25:55
0 2019/05/24 17:27:23
0 2019/05/24 17:28:23
0 2019/05/24 17:28:53
0 2019/05/24 17:31:00
0 2019/05/24 17:31:40
0 2019/05/24 18:59:25
0 2019/05/24 19:00:14
0 2019/05/24 19:19:00
0 2019/05/24 19:19:33
0 2019/05/24 19:20:46
0 2019/05/24 19:22:13
0 2019/06/06 06:44:27
0 2019/06/06 06:45:04
0 2019/06/06 06:46:35
0 2019/06/18 18:42:37
0 2019/06/18 18:49:46
0 2019/06/18 18:52:26
0 2019/07/08 19:30:31
0 2019/07/11 16:22:10
0 2019/07/14 08:47:34
0 2019/07/14 08:48:33
0 2019/07/14 08:50:10
Its a chase bays brake line tuck kit, heres the proportioning valve that sits on the drivers side of the master cylinder so its hidden behind the strut tower. You also have to flip the brake booster around so the vacuum line is on the passenger side otherwise that nipple hits the proportioning valve.
Its a chase bays brake line tuck kit, heres the proportioning valve that sits on the drivers side of the master cylinder so its hidden behind the strut tower. You also have to flip the brake booster around so the vacuum line is on the passenger side otherwise that nipple hits the proportioning valve.
0 2019/07/14 13:47:44
But ya think it cleans it up quite a bit. Got the chase bays fuel line tuck kit as well to run an inline fuel filter but idk how i like it cuz the end that screws onto the oe line isnt like a fitting you gotta put on and flare the line, it just clamps on with a hose clamp which to me seems like just asking for leaks.
But ya think it cleans it up quite a bit. Got the chase bays fuel line tuck kit as well to run an inline fuel filter but idk how i like it cuz the end that screws onto the oe line isnt like a fitting you gotta put on and flare the line, it just clamps on with a hose clamp which to me seems like just asking for leaks.
0 2019/07/14 13:48:04
0 2019/07/14 13:52:38
0 2019/07/14 13:53:06
0 2019/08/04 17:35:33
0 2019/08/04 17:37:28
0 2019/08/04 17:38:04
0 2019/08/04 17:39:24