My Post Pictures

October 25, 2018

337

0

0 2018/10/28 13:15:10 davojuri

New Hardrace camber kit in, old broken D2 out

New Hardrace camber kit in, old broken D2 out

0 2018/10/28 13:15:01 davojuri

0 2018/10/28 12:56:54 davojuri

New Hardrace camber kit,and broken old D2

New Hardrace camber kit,and broken old D2

0 2018/10/28 12:56:45 davojuri

EP3 Type R steering wheel with EP3 Sport air bag

EP3 Type R steering wheel with EP3 Sport air bag

0 2018/10/28 12:55:36 davojuri

EP Type R steering wheel With EP3 Sport airbag

EP Type R steering wheel With EP3 Sport airbag

0 2018/10/28 12:53:30 davojuri

0 2018/10/28 12:52:41 davojuri

www.moman.pl plasma scales

www.moman.pl plasma scales

0 2018/10/28 12:52:17 davojuri

Custom rear LCA made of one piece od hard alu 7075

Custom rear LCA made of one piece od hard alu 7075

0 2018/10/28 12:50:28 davojuri

Custom rear LCA made of one djece 7075 hard alu

Custom rear LCA made of one djece 7075 hard alu

0 2018/10/28 12:49:29 davojuri

In place, ,All tight.

In place, ,All tight.

0 2018/10/25 01:42:53 davojuri

0 2018/10/25 01:42:27 davojuri

Was after black one but it was loosening im that Rubber valve garment so I went for Blue one. Black was shorten and Blu can't ne so I made ruber hose stopper

Was after black one but it was loosening im that Rubber valve garment so I went for Blue one. Black was shorten and Blu can't ne so I made ruber hose stopper

0 2018/10/25 01:41:53 davojuri

Two lines comming from the block straight up to the can and 2 central ones on MOCAL SP1T thermostat to the oil cooler in the front

Two lines comming from the block straight up to the can and 2 central ones on MOCAL SP1T thermostat to the oil cooler in the front

0 2018/10/25 01:31:26 davojuri

0 2018/10/25 01:30:27 davojuri

0 2018/10/25 01:29:45 davojuri

Valve cover still has 19mm fluorom Ines silikone hose that runs under the car and PCV is replaced by AN10 to 1/2" Barb 90° fitting.

Valve cover still has 19mm fluorom Ines silikone hose that runs under the car and PCV is replaced by AN10 to 1/2" Barb 90° fitting.

0 2018/10/25 01:28:33 davojuri

Page
9 of 9

Go To
Page

Go to page of 9 pages

1
2
3
4
5
6
7
8
9