Honda-Tech - Honda Forum Discussion
0 2018/08/22 08:57:46
New Cusco 378 540 A Strut bar and KN RU4600 With 6-3" velocity stavk
New Cusco 378 540 A Strut bar and KN RU4600 With 6-3" velocity stavk
0 2018/08/22 08:58:25
0 2018/08/22 09:03:07
0 2018/08/22 09:07:06
0 2018/08/22 09:19:50
0 2018/08/22 09:21:31
0 2018/08/22 09:22:49
0 2018/08/22 09:24:17
0 2018/08/22 09:25:22
0 2018/08/22 09:27:54
Custom made LCA from one piece od 7075 hard alu and hard anodised, with polly bushings and red capa and New SuperPro Swaybar endlinks Those LCA were first one made inthe whole Works. Only Function7 were doing this for ITR and didn't wont to do for CRV so I made them before any other company heheheeee
Custom made LCA from one piece od 7075 hard alu and hard anodised, with polly bushings and red capa and New SuperPro Swaybar endlinks Those LCA were first one made inthe whole Works. Only Function7 were doing this for ITR and didn't wont to do for CRV so I made them before any other company heheheeee
0 2018/08/22 09:29:05
Front and rear subframe rigid collars
Front and rear subframe rigid collars
0 2018/08/22 09:34:46
Front and rear subframe rigid collars
Front and rear subframe rigid collars
0 2018/08/22 09:36:16
Front and rear subframe rigid collars
Front and rear subframe rigid collars
0 2018/08/22 09:37:25
0 2018/08/22 09:38:25
Castor increasing front LCA rear bushing
Castor increasing front LCA rear bushing
0 2018/08/22 09:39:06
0 2018/08/22 09:40:32
0 2018/08/22 09:41:33
0 2018/08/22 09:42:34
0 2018/08/22 09:43:34
0 2018/08/22 09:44:01
0 2018/08/22 09:44:38
0 2018/09/10 02:58:51
Catch can hardware 2m AN10 hose AN10 fittings
Catch can hardware 2m AN10 hose AN10 fittings
0 2018/09/20 13:38:42
0 2018/09/20 13:39:30
2m AN10 hose
2m AN10 hose
0 2018/09/20 13:40:34
AN10 catch can fitting
AN10 catch can fitting
0 2018/09/20 13:40:58
New PTFE intake gaskwt, sump gasket and hardware
New PTFE intake gaskwt, sump gasket and hardware
0 2018/09/20 13:42:19
New gaskets
New gaskets
0 2018/09/20 13:44:17
Due to the fact my two Bolts on intake were constantly loosening Just where coolant enters from cylinder head to intake and leakage od coolant i preparat sa nuts With serrated washers, same but withnylin kocka, nylon washers, Cooper standard m14 and small m10 nuts-holds higher tempa and do not lose
Due to the fact my two Bolts on intake were constantly loosening Just where coolant enters from cylinder head to intake and leakage od coolant i preparat sa nuts With serrated washers, same but withnylin kocka, nylon washers, Cooper standard m14 and small m10 nuts-holds higher tempa and do not lose
0 2018/09/20 13:45:07
Hardrace coil bushings to replace poly Ines due to their squeze sound especially in cold weather
Hardrace coil bushings to replace poly Ines due to their squeze sound especially in cold weather
0 2018/09/20 13:48:54
Hardrace front Swaybar endlinks
Hardrace front Swaybar endlinks
0 2018/09/20 13:50:44
0 2018/09/23 14:19:51
Planned catch can setup. Two lines comming from block breathers-left and right and one comming from valve cover joining to T on catch can.
Planned catch can setup. Two lines comming from block breathers-left and right and one comming from valve cover joining to T on catch can.
0 2018/09/23 14:20:21
All parts completed
All parts completed
0 2018/09/23 14:21:44
0 2018/09/23 14:22:45
0 2018/09/24 13:19:20
0 2018/09/24 13:19:36
0 2018/09/24 13:19:55
0 2018/09/24 13:20:10