Honda-Tech - Honda Forum Discussion
Share Your Pictures with Our Community. Upload Now
247
247
0 2012/01/03 10:34:08
248
248
0 2012/01/03 10:34:08
705
705
0 2012/01/03 10:34:08
IMG 0337[1]
IMG 0337[1]
0 2012/01/03 09:24:42
i 4
i 4
0 2012/01/03 09:04:38
188663 1694795295368 1402399853 31641211 5757499 n
188663 1694795295368 1402399853 31641211 5757499 n
0 2012/01/03 02:54:29
the chilli pepper
the chilli pepper
0 2012/01/03 01:10:34
My homie on his teggy
My homie on his teggy
0 2012/01/03 01:10:34
Homie on my teggy
Homie on my teggy
0 2012/01/03 01:10:34
95facebook95 81583668595
95facebook95 81583668595
0 2012/01/02 21:38:06
Relocated Brake lines run underneath the cowel
Relocated Brake lines run underneath the cowel
0 2012/01/02 19:53:35
Relocated Purportioning Valve
Relocated Purportioning Valve
0 2012/01/02 19:53:35
Advertisement
Myyy Car, and my twin bro
Myyy Car, and my twin bro
0 2012/01/02 19:53:35
Shes goin in
Shes goin in
0 2012/01/02 19:41:09
Back side, accord half shaft if your curious.
Back side, accord half shaft if your curious.
0 2012/01/02 19:41:09
Settlin in
Settlin in
0 2012/01/02 19:41:09
Secure motor mounts, attach what ya can
Secure motor mounts, attach what ya can
0 2012/01/02 19:41:09
Torque the head on down
Torque the head on down
0 2012/01/02 19:41:09
Aaand the intake manifold. When removing the head at from this point I would have to start by removing the intake manifold. It used to be a huge pain in the ass, I would have to pry foward from the header jus to gain the extra inch but after relocating the purportioning valve there is just enough room to slide the intake manifold off the studs turn it upward and flip right out with out even scrapping a thing
Aaand the intake manifold. When removing the head at from this point I would have to start by removing the intake manifold. It used to be a huge pain in the ass, I would have to pry foward from the header jus to gain the extra inch but after relocating the purportioning valve there is just enough room to slide the intake manifold off the studs turn it upward and flip right out with out even scrapping a thing
0 2012/01/02 19:41:09
Straight from Honda All new Clutch, Flywheel and Pressure Plate
Straight from Honda All new Clutch, Flywheel and Pressure Plate
0 2012/01/02 19:26:28
H22 Head for the G23 Build. Note the 2 plugged oil drain ports on the timing gear side of the head (right side)
H22 Head for the G23 Build. Note the 2 plugged oil drain ports on the timing gear side of the head (right side)
0 2012/01/02 19:26:28
Used set of K20 pistons resting inside of the freshly 1mm bored out F22a1 Block. Also note, the 6 oil drain ports on the block's deck, hence the reason for blocking the 2 in the Head
Used set of K20 pistons resting inside of the freshly 1mm bored out F22a1 Block. Also note, the 6 oil drain ports on the block's deck, hence the reason for blocking the 2 in the Head
0 2012/01/02 19:26:28
Engine Bay Painted w/ metalic blue. Also notice the fresh Avid motor mounts aswell as the relocated purportioning vavle, or well the absense of it.
Engine Bay Painted w/ metalic blue. Also notice the fresh Avid motor mounts aswell as the relocated purportioning vavle, or well the absense of it.
0 2012/01/02 19:26:28
Nice fresh coat of Gold and blue
Nice fresh coat of Gold and blue
0 2012/01/02 19:26:28
F22 5 speed Cable trans, with some more detailing
F22 5 speed Cable trans, with some more detailing
0 2012/01/02 19:26:28
2011 05 24 17.32.26
2011 05 24 17.32.26
0 2012/01/02 18:31:06
2011 05 24 17.31.14
2011 05 24 17.31.14
0 2012/01/02 18:31:06
2011 05 24 17.29.33
2011 05 24 17.29.33
0 2012/01/02 18:31:06
20120102 154731
20120102 154731
0 2012/01/02 17:56:28
20120102 154757
20120102 154757
0 2012/01/02 17:56:28
20120102 154820
20120102 154820
0 2012/01/02 17:56:28
20120102 155023
20120102 155023
0 2012/01/02 17:56:28
Advertisement