Honda-Tech - Honda Forum Discussion
Share Your Pictures with Our Community. Upload Now
After hammering it down
After hammering it down
0 2015/04/26 22:29:56
Close up of the hole/notch. No idea how it got there, but I didn't do it. Definitely looks like the car was lowered onto something.
Close up of the hole/notch. No idea how it got there, but I didn't do it. Definitely looks like the car was lowered onto something.
0 2015/04/26 22:29:54
Had to pull up the carpet to hammer down the notch I found, and be able potentially weld it.
Had to pull up the carpet to hammer down the notch I found, and be able potentially weld it.
0 2015/04/26 22:29:48
At least I had a spot to put the interior parts that was off the ground.
At least I had a spot to put the interior parts that was off the ground.
0 2015/04/26 22:29:46
Started ripping out the interior to get to a spot that is under the driver's seat
Started ripping out the interior to get to a spot that is under the driver's seat
0 2015/04/26 22:27:57
snagged a buddy's $20 to use as a way to show you the amount of concavity these have. this was shot so that you would see straight across the the other lip and know how deep they are. about 3-3.5" i would say, at the center.
snagged a buddy's $20 to use as a way to show you the amount of concavity these have. this was shot so that you would see straight across the the other lip and know how deep they are. about 3-3.5" i would say, at the center.
0 2015/04/26 21:29:50
and a different angle to show off those curves, haha. love me some concave wheels.
and a different angle to show off those curves, haha. love me some concave wheels.
0 2015/04/26 21:29:33
0 2015/04/26 21:29:15
0 2015/04/26 21:15:35
1 2015/04/26 21:15:31
0 2015/04/26 21:15:27
0 2015/04/26 21:15:22
Advertisement
0 2015/04/26 21:15:17
0 2015/04/26 21:15:13
0 2015/04/26 21:15:08
0 2015/04/26 21:15:04
0 2015/04/26 21:04:55
0 2015/04/26 21:04:50
The faithful Y7. Pulled it and still my daily in my wagon beater.
The faithful Y7. Pulled it and still my daily in my wagon beater.
0 2015/04/26 20:28:22
2 hours sleep to get to the wreckers early after working a night shift! LS tranny and shift linkage for cheap!
2 hours sleep to get to the wreckers early after working a night shift! LS tranny and shift linkage for cheap!
0 2015/04/26 20:28:08
Clean looking motor for a junkyard engine!
Clean looking motor for a junkyard engine!
0 2015/04/26 20:28:02
Pulling the engine in pieces at the wreckers...
Pulling the engine in pieces at the wreckers...
0 2015/04/26 20:27:54
My 97 hatch - pre swap!
My 97 hatch - pre swap!
0 2015/04/26 20:27:41
0 2015/04/26 20:06:51
0 2015/04/26 19:42:43
0 2015/04/26 18:49:55
0 2015/04/26 18:47:18
0 2015/04/26 18:30:32
0 2015/04/26 18:17:51
0 2015/04/26 18:10:56
0 2015/04/26 18:10:36
0 2015/04/26 18:10:20
Advertisement