Honda-Tech - Honda Forum Discussion
Share Your Pictures with Our Community. Upload Now
washed the bay by hand and hit it with spray paint. came out pretty good i considering how little effort it took
washed the bay by hand and hit it with spray paint. came out pretty good i considering how little effort it took
0 2016/01/07 22:37:22
built the top half, and got the lower piece with flex pipe and o2 bungs for 25$
built the top half, and got the lower piece with flex pipe and o2 bungs for 25$
0 2016/01/07 22:35:18
tons of room
tons of room
0 2016/01/07 22:34:09
Started downpipe
Started downpipe
0 2016/01/07 22:33:10
It was around this time my mom told me she was selling the house and i had to hurry this project up. Funds where already non existent, so real engine management would have to wait, but i hade a apexi safc that i had no luck selling. So figured i would use it just for a month to make my car mobile, winter was coming. Also my buddy from work really hooked me up with a AEM wideband gauge and sensor, in box used once for 60$!! sweeet
It was around this time my mom told me she was selling the house and i had to hurry this project up. Funds where already non existent, so real engine management would have to wait, but i hade a apexi safc that i had no luck selling. So figured i would use it just for a month to make my car mobile, winter was coming. Also my buddy from work really hooked me up with a AEM wideband gauge and sensor, in box used once for 60$!! sweeet
0 2016/01/07 22:25:03
finished wiring finally. It was a lot of work, but well worth it for a cleaner bay
finished wiring finally. It was a lot of work, but well worth it for a cleaner bay
0 2016/01/07 22:23:36
Heat wraped turbo manifold. I love the look of heat wrap.
Heat wraped turbo manifold. I love the look of heat wrap.
0 2016/01/07 22:22:19
0 2016/01/07 22:21:19
0 2016/01/07 22:19:43
Finished my first piece of the puzzle, felt good to actually get something done.
Finished my first piece of the puzzle, felt good to actually get something done.
0 2016/01/07 22:18:36
0 2016/01/07 22:17:33
all tacked up and ready to final assemble my waste gate dump.
all tacked up and ready to final assemble my waste gate dump.
0 2016/01/07 22:16:27
Advertisement
i used some spare neochrome extended lug nuts to mount my intercooler. They just poke threw the bumper. match my neochrome subframe brace in the rear, i like small details that can be easily overlooked.
i used some spare neochrome extended lug nuts to mount my intercooler. They just poke threw the bumper. match my neochrome subframe brace in the rear, i like small details that can be easily overlooked.
0 2016/01/07 22:14:32
Cut a hole in the bumper and started trimming for charge pipes and intercooler. It took a longggg time to trim everything. i didnt want to do too much. I found the best way to cut the plastic was to scribe it multiple times with a razor and snap it off.
Cut a hole in the bumper and started trimming for charge pipes and intercooler. It took a longggg time to trim everything. i didnt want to do too much. I found the best way to cut the plastic was to scribe it multiple times with a razor and snap it off.
0 2016/01/07 22:12:25
0 2016/01/07 22:11:33
So i decided to dump the wastegate out the side of my bumper
So i decided to dump the wastegate out the side of my bumper
0 2016/01/07 22:10:12
Through a series of trades i came across another set of 15" heliums in silver. A quick trip to dads and they were color matched to my valve cover.
Through a series of trades i came across another set of 15" heliums in silver. A quick trip to dads and they were color matched to my valve cover.
0 2016/01/07 22:08:27
A friend changed his mind on his build, these were new in box. Think i payed 100
A friend changed his mind on his build, these were new in box. Think i payed 100
0 2016/01/07 22:07:19
0 2016/01/07 22:06:23
0 2016/01/07 22:05:18
Yup ... im doin pie cuts. I figure it would give me more surface area to practice welding on... and i find it really fun doing this plumbing
Yup ... im doin pie cuts. I figure it would give me more surface area to practice welding on... and i find it really fun doing this plumbing
0 2016/01/07 22:03:15
0 2016/01/07 22:01:54
0 2016/01/07 22:00:31
i bought all Green Mishimoto couplers and mishimoto clamps for it. Green accents to match lug nuts and Takata harness sitting in my closet
i bought all Green Mishimoto couplers and mishimoto clamps for it. Green accents to match lug nuts and Takata harness sitting in my closet
0 2016/01/07 21:58:43
I bought some bends and was eager to start welding. I mounted my intercooler and decided to just jump into welding without learning the settings on my machine first. that was a mistake. burnt a hole in my intercooler mount bracket.
I bought some bends and was eager to start welding. I mounted my intercooler and decided to just jump into welding without learning the settings on my machine first. that was a mistake. burnt a hole in my intercooler mount bracket.
0 2016/01/07 21:55:33
Built a mount for fuse panel out of some random brackets kicking around.
Built a mount for fuse panel out of some random brackets kicking around.
0 2016/01/07 21:54:02
working on wiring, thats just a spare harness on the ground. needed some plugs and pieces
working on wiring, thats just a spare harness on the ground. needed some plugs and pieces
0 2016/01/07 21:52:07
Its hard to find time for this build, i work full time and overtime often, and have a wife and kid to spend a lot of time with. But i find staying up friday nights with coffee or beer is the best time to get stuff done
Its hard to find time for this build, i work full time and overtime often, and have a wife and kid to spend a lot of time with. But i find staying up friday nights with coffee or beer is the best time to get stuff done
0 2016/01/07 21:50:08
0 2016/01/07 21:49:13
started deleting. looking much cleaner already
started deleting. looking much cleaner already
0 2016/01/07 21:47:53
so cluttered
so cluttered
0 2016/01/07 21:46:33
Just getting ready to pull the dash
Just getting ready to pull the dash
0 2016/01/07 21:45:13
Advertisement