Honda-Tech - Honda Forum Discussion
Share Your Pictures with Our Community. Upload Now
Finally got the car over the engine!
Finally got the car over the engine!
0 2017/06/03 16:40:51
Finally the engine was out after afew hours
Finally the engine was out after afew hours
0 2017/06/03 16:37:22
Getting ready to drop the engine out of the buttom, my crane is currently stuck behind the car anyways :p.
Getting ready to drop the engine out of the buttom, my crane is currently stuck behind the car anyways :p.
0 2017/06/03 16:28:49
Disassembling the engine bay, head off currently.
Disassembling the engine bay, head off currently.
0 2017/06/03 16:27:39
Me attempting to get the car ready in spring, it just stopped running last fall. Yes I messed up bad starting up a blown motor.
Me attempting to get the car ready in spring, it just stopped running last fall. Yes I messed up bad starting up a blown motor.
0 2017/06/03 16:26:31
0 2017/06/03 16:22:33
0 2017/06/03 16:22:20
Me attempting to start the car, not realizing it has no compression, yah I messed up -.-
Me attempting to start the car, not realizing it has no compression, yah I messed up -.-
0 2017/06/03 16:21:11
0 2017/06/03 16:19:32
0 2017/06/03 16:12:55
0 2017/06/03 16:12:25
0 2017/06/03 16:12:15
Advertisement
0 2017/06/03 16:11:22
0 2017/06/03 16:03:21
0 2017/06/03 16:02:30
0 2017/06/03 16:01:39
0 2017/06/03 16:00:49
0 2017/06/03 15:56:58
0 2017/06/03 10:49:48
0 2017/06/03 10:49:45
0 2017/06/03 10:49:40
0 2017/06/03 10:49:29
0 2017/06/03 10:47:46
0 2017/06/03 10:39:05
0 2017/06/03 10:35:37
0 2017/06/03 10:33:47
0 2017/06/03 10:33:45
0 2017/06/03 10:15:16
0 2017/06/03 09:52:57
0 2017/06/03 09:51:27
0 2017/06/03 09:38:13
This is the new chromoly johnny joint. I'll be using different high misalignment spacers not in the picture. It's the same width as the original joint bushing joint with the spacers. I'll now have camber and toe adjustments on all the wheels.
This is the new chromoly johnny joint. I'll be using different high misalignment spacers not in the picture. It's the same width as the original joint bushing joint with the spacers. I'll now have camber and toe adjustments on all the wheels.
0 2017/06/03 09:37:07
Advertisement