Honda-Tech - Honda Forum Discussion
Share Your Pictures with Our Community. Upload Now
Rice or nice?? Lol. In this shot, looks rice, but it’s actually nice rice. :)
Rice or nice?? Lol. In this shot, looks rice, but it’s actually nice rice. :)
0 2019/10/09 21:48:58
Hmm.. I think my push lock fitting for my boost solenoid.. it’s going to melt. I searched and found mostly metal ones. Installed. Let’s see what happens.
Hmm.. I think my push lock fitting for my boost solenoid.. it’s going to melt. I searched and found mostly metal ones. Installed. Let’s see what happens.
0 2019/10/09 21:40:26
Look!!! I water cooled the wastegate. That’s why I had that note book with the ghetto angles, and this is what else the 6AN weld bung on the water pipe is feeding. Well the bung has a hose that goes to a T on one side of the turbo.. there is a T on the other side too. Took some thinking to figure out the fittings and adapters and such. Costed around 115 to make this damn wastegate watercooler, totally unnecessary but totally cool!
Look!!! I water cooled the wastegate. That’s why I had that note book with the ghetto angles, and this is what else the 6AN weld bung on the water pipe is feeding. Well the bung has a hose that goes to a T on one side of the turbo.. there is a T on the other side too. Took some thinking to figure out the fittings and adapters and such. Costed around 115 to make this damn wastegate watercooler, totally unnecessary but totally cool!
0 2019/10/09 21:40:16
Mobile temp vise! Using to put AN hose end fittings on.
Mobile temp vise! Using to put AN hose end fittings on.
0 2019/10/09 21:40:06
Decided I was going to clean up/modify my engine harness. Flat overwhelmed for a bit.
Decided I was going to clean up/modify my engine harness. Flat overwhelmed for a bit.
0 2019/10/09 21:39:56
Piping doesn’t fit well because the damn skunk2 gods decided they needed to be different and angle their TB.
Piping doesn’t fit well because the damn skunk2 gods decided they needed to be different and angle their TB.
0 2019/10/09 21:39:47
I made this dope little sub harness (2 of them) for the headlights and I’m proud of it!
I made this dope little sub harness (2 of them) for the headlights and I’m proud of it!
0 2019/10/09 21:39:36
After much thought.. bought this pillar thing. Tried to JB weld it. Wanted to avoid screws. The JB weld broke free when I was trying to do a final install. I ended up using factory screws.
After much thought.. bought this pillar thing. Tried to JB weld it. Wanted to avoid screws. The JB weld broke free when I was trying to do a final install. I ended up using factory screws.
0 2019/10/09 21:39:26
Everything felt trashed. So much wiring. My neck hurt.
Everything felt trashed. So much wiring. My neck hurt.
0 2019/10/09 21:39:16
0 2019/10/09 21:38:10
Got the radiator and condenser to fit, gonna d a little trimming to try to get a little more room
Got the radiator and condenser to fit, gonna d a little trimming to try to get a little more room
0 2019/10/09 21:38:01
0 2019/10/09 21:37:53
Advertisement
Injectors and fuel pump came in, only things left- jbtuned e85 kit with lines, fittings, filter, regulator, a rywire tuck harness, custom downpipe and wastegate dump pipe, and gram lite 57DR
Injectors and fuel pump came in, only things left- jbtuned e85 kit with lines, fittings, filter, regulator, a rywire tuck harness, custom downpipe and wastegate dump pipe, and gram lite 57DR
0 2019/10/09 21:37:45
I make the brake light wires go out of the same hole where the wiper motor wires used to go into. Used the factory grommet.
I make the brake light wires go out of the same hole where the wiper motor wires used to go into. Used the factory grommet.
0 2019/10/09 21:36:18
You ever seen a headlight wire harness tuck so cleeeaan?
You ever seen a headlight wire harness tuck so cleeeaan?
0 2019/10/09 21:36:08
I mounted my HID ballasts like this. Come to find out it gets in the way of the factory fogs... later find also the intercooler piping gets in the way too! For now I am not running fogs. Later I’ll go backdoor intercooler so I can fit my fogs, and keep my ballasts in this neat location.
I mounted my HID ballasts like this. Come to find out it gets in the way of the factory fogs... later find also the intercooler piping gets in the way too! For now I am not running fogs. Later I’ll go backdoor intercooler so I can fit my fogs, and keep my ballasts in this neat location.
0 2019/10/09 21:35:57
Look at this coool thing! I rotated the brake booster so that the vacuum port was at the bottom, hidden. Now the hose is very short. The check valve is still in place.
Look at this coool thing! I rotated the brake booster so that the vacuum port was at the bottom, hidden. Now the hose is very short. The check valve is still in place.
0 2019/10/09 21:35:44
The Coolant only becomes heated during shut down during the CHRA's siphoning effect of the heat from the the turbine housing.
The Coolant only becomes heated during shut down during the CHRA's siphoning effect of the heat from the the turbine housing.
0 2019/10/09 20:48:28
0 2019/10/09 18:33:22
0 2019/10/09 18:33:18
0 2019/10/09 18:29:00
0 2019/10/09 18:13:15
0 2019/10/09 18:13:09
0 2019/10/09 16:41:17
0 2019/10/09 16:41:01
0 2019/10/09 15:00:30
0 2019/10/09 15:00:26
0 2019/10/09 15:00:23
0 2019/10/09 15:00:19
0 2019/10/09 15:00:15
0 2019/10/09 15:00:13
0 2019/10/09 15:00:09
Advertisement