Located in CT, will accept trades if your local (really lookin from some modernlines), shipping and paypal is not included in the prices.


Barrels were stripped and powdercoated by po
1.5" BFI lips up front
2" BFI lips in the rear
BFI Spikes all around (with an extra 5 not used)
BFI 1/4 height hexes
Red and Gold logo's
195/45/15 Nexens (fronts are just about done but the rears have loads of life left)

15x7.5 et21 and 15x8 et15 front and rear respectively with no cracks or bends


$1400 for the wheels with black bbs logo's and stock height hex centers
$1700 for the wheels with current setup

Lips and hex caps will be polished again prior to being sold


How they sit on my b13 with 5mm spacers in the rear:


Front:


Rear:


Better angle of the curbage from the po (also can be seen in the pic above around where the flash reflection is)


One more:

 

Red logo's are staying until I have a buyer for the wheels.

 

Here are shots of the price breakdown:

$1400:



$1500:



What the stock hex centers look like from straight on:



$1600:



And the $1700 price is for them with the red/gold logo's and the 1/4 height center hex caps like previously stated.


Extra's going with the wheels (power cone, mothers and plastic pry tools [one is needed for the stock center hexes, two are for the 1/4 height caps]):



Farthest in with the least amount of tread out of both rear wheels:


Also if the buyer didn't want the front tires I would get them dismounted to cut down on shipping.

 

Bumps

 

tops