I bought a set of 18" rims. Going to be running 235/40/18 in the rear and 225/40/18 in the front, but have to also get a centering ring for the hub. Its an 05 Accord 4 door. Does anything run this size of just a simple yes or no that it will fit without rubbing. Thanks

 

can u give me the offset, width of the rims and if you are going to lower the car or how low it is.....

at stock height..No you will not rub depending on the offset/width

 

I am not going to lower the car at all. The rim is a Motegi 18X8. I'm almost posivtive its a 35mm offset.

 

the wheel will stick out slightly up front and the back will rub slightly but only on funky turns while carrying heavy loads i.e. passengers in the backseat

 

Do you think that if I put the 235 in the front or had 225 all around it would help the situation?

 

try on the wheels first then decide. the right offset for your car is around +48 and tire size for your car is 215/45-18 so none of those sizes you mentioned will really 'help' the situation..just try them on and then check back...and i have the same car and tried them all on w/ no good luck especially since you don't want to mod anything like camber, height, etc

 

Ok, Thanks. I'll be getting back to you. Tommy