dr-20 low offset question???
Thread Starter
Honda-Tech Member
Joined: Feb 2006
Posts: 327
Likes: 0
From: Riverside Cali
dr-20 low offset question???
will these wheels fit my 98 integra gsr? the specs on these wheels are 15 x 7 an the offset is +10.. any input will be appreciated Thanx
http://dragwheels.com/product.asp?ID=110
http://dragwheels.com/product.asp?ID=110
Honda-Tech Member
Joined: Apr 2007
Posts: 19
Likes: 0
From: WestCovina/Orange/Anaheim, socal, usa
Re: dr-20 low offset question??? (Loco-B)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Loco-B »</TD></TR><TR><TD CLASS="quote">no they wont fit at all. 
</TD></TR></TABLE>
</TD></TR></TABLE>
Honda-Tech Member
Joined: Apr 2007
Posts: 2,756
Likes: 0
From: nigeria
Re: dr-20 low offset question??? (jdmer4life)
Technically they arent the correct fitment. But you can make them fit. Depending how low you are you might need to roll fender.
7in = 177.8mm/2= 88.9mm-10 offset= 78.9mm from hub to lip. So assume +40 offset is about 10mm inside the fender. 78.9-40-10= 28.9. The wheels will stick out of your fender 1.1 inches. So youll need a some camber.
7in = 177.8mm/2= 88.9mm-10 offset= 78.9mm from hub to lip. So assume +40 offset is about 10mm inside the fender. 78.9-40-10= 28.9. The wheels will stick out of your fender 1.1 inches. So youll need a some camber.
Trending Topics
Honda-Tech Member
Joined: Mar 2002
Posts: 937
Likes: 0
From: cleaned, ct
Re: dr-20 low offset question??? (xJ.SLOTHx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xJ.SLOTHx »</TD></TR><TR><TD CLASS="quote">unless you add mass amounts of camber and alot of fender rolling and pulling they will still stick out to much and look silly. </TD></TR></TABLE>
Junior Member
Joined: Jun 2007
Posts: 744
Likes: 0
From: San Jose, CA, us
Re: dr-20 low offset question??? (efvader)
my da is rocking 10 offset and it only required rolling the fenders and i could still put 5mm spacers in front. but i think its easier to fit low offest on a da than a dc
Junior Member
Joined: Oct 2008
Posts: 24
Likes: 0
From: Melbourne, VIC, Australia
Re: dr-20 low offset question??? (jdmer4life)
^ as above they'd fit but it wont be "to easy".
just invest in a nice camber kit and pump your guards well enough, im sure you could make it work!
just invest in a nice camber kit and pump your guards well enough, im sure you could make it work!
Junior Member
Joined: Jun 2007
Posts: 744
Likes: 0
From: San Jose, CA, us
Re: (jdmer4life)
you gotta have alot of camber if you're not gonna pull your fenders. i just rolled mine. but im rocking enough camber to make it sit flushed. actually my front i got go 5mm more
Honda-Tech Member
Joined: May 2006
Posts: 1,422
Likes: 0
From: My Block, WA
Re: dr-20 low offset question??? (Loco-B)
Originally Posted by Loco-B
you just answered your own question 
personally might fit better than a 15x8 with a +0 e.t.
personally might fit better than a 15x8 with a +0 e.t.
Thread
Thread Starter
Forum
Replies
Last Post
