What size wheels fit the si's? I have some rota slipstreams in 15x6.5 sitting on my miata that I want to put onto the civic (if I buy it).

the rotas are 15x6.5 +40ET. What offset does the civic si use? its bolt pattern is 4x100, correct? What about the wheel studs, are they spaced at 1 x 1.5mm or 1 x 1.25mm?

Thanks!
-Justin


...I am new here and I did search but came up short on finding info about the 03 SI... on the newer hatches did they change the bolt pattern to 5 lug? I cant seem to find any info on this... :confused:

 

Your 03 Si is a 4x100 bolt pattern, just like the Miata. We list the same wheel fitments for both vehicles so they should fit fine. You may want to contact a store that sells the wheel to see if you need different lugs.

 

cool, as long as the civic uses 1.5mm and not 1.25 the lugs would work

 

Honda Offset ET40

Miata Offset ET33

I know this because I have one sitting at work
with some 15CH 5ZIGEN FN01RC et 33. The rims will work but they will past the fenderwell a little bit.

 

the only ones with the thread pitch of 12x1.25 are the nissan's> Honda/Miata 12x1.5 thread pitch

 

sweet! Well I know my rotas are +40 offset...thats what Rspeed sold me a year ago.

I guess these will be going on the civic IF I get it... still deciding on an 03 SI or a 06 xA (Id rather have the civic...my friends want me to get the scion).