i got the idea from this thread
https://honda-tech.com/zerothread?id=1013412

and used my terrible fabrication skills to make this









oh i still need to attach the casters

 

Looks good, how much did it cost around to make ?

 

~$50 for the table top 1/8" thick
~$50 for all of the other material

if i did it again i would have made everything but the top section out of wood, just to save some $.

it was fun to make though

 

That's clean!!! Now you can just clamp the ground to the table, and use c-clamps on what you're welding. I want to do this now

 

looks good.

 

My table is a HUGE piece of 1/2" steel thats on a wood base. Its about 3 feet deep and 8 feet long. Its nice :-D

 

Now the fun part is when you are leaning on the table and give yourself a little zap (if you're TIGing).

No, your phone's not vibrating, Trust Me.

 

I hate it when that happens. You have the torch on the table and hit the foot pedal and get a little jolt.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boosted-delslow &raquo;</TD></TR><TR><TD CLASS="quote">I hate it when that happens. You have the torch on the table and hit the foot pedal and get a little jolt.</TD></TR></TABLE>

I always get it through my work.

 

i wish i had a tig so i could get zapped too

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by McDade &raquo;</TD></TR><TR><TD CLASS="quote">i wish i had a tig so i could get zapped too </TD></TR></TABLE>

I don't personnally have one, but the shop I work in does. Free argon and practice metal whenever I want.